Broken Destiny FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Zindy S. D. Nielsen. You need a license to use this art work. Please do not use without a license.

You can find her art at her store HERE

Supplies Needed

Scraps by Jessica called Broken Destiny  HERE

PSP...I used PSPX...but any of them should work.

Filters used

Xero Filter-Porcelain and Clarity

Font used Coneria Script 

Let's get started

Add your drop shadow as you go along, I usually use V2, H2, 50, 5
Easy peasy one to do

Open a new image to a size you are use to using,
I make mine 800 x 800 and resize it later.
Cope and paste frame #3 and then get your magic wand and click inside, expand by 5, paste paper #6, invert and delete, move below the frame.
Copy the lace and place on the bottom layer and to the left of the frame.
Copy and paste your tube and resize if needed, move below the frame, duplicate and move above the frame and erase any excess over the frame. Apply xero Porcelain to both tubes and then apply Clarity to the top tube. Add your drop shadow to the bottom tube.
Copy doodle #1 and place just above the lace layer and move to where you like the looks of it.
Resize the pen to 50% and free rotate to the right 35% and place on the frame.
Copy and paste the clock, and move to the bottom layer and up to the right side of the frame.
Resize butterfly #6 to 30% and place where you like, duplicate, mirror and place as many times as you would like.
Once happy, merge visible and resize.
Add your copyright and name and that's it.
Hope you enjoyed doing this tut.

Orange Delight Forum Set FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alexander McMillan. You need a license to use this art work. Please do not use without a license. You can find this art at SATC HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Summer Cocktail by Pink Candy Designs HERE
You can find the kit HERE
Mura Meister filter-Copies
Xero filter-fritillary
AAA Frames-Foto Frame

Drop Shadow usually V2 H2 50 5
Font of choice, I used Kon Tiki Enchanted JK

Alway add your drop shadow as you go along.

Let's get started
This is an easy peasy one

Open a new image 600 x 250
Copy and paste paper #6 and add xero filter-fritillary at these settings
5, 30 10, 20
Resize the oranges to 50% copy and paste and apply mura meister filter-copies, line rotate, move to the bottom of your tag.
Resize the fern and the palm tree to 75% and place behind the oranges. The fern in the center and the palm off to the right side. Duplicate the palm tree, and mirror.
Duplicate the fern and resize to 75% and move to the left.
resize the sunglasses to 50% and free rotate to the left at 15%
Resize the parrot to 25% and place on the palm tree and free rotate to the left at 35%
Resize the drink to 50% and place behind the sunglasses and to the left of them some.
Take your selection tool and draw out a rectangle, add a new raster layer, fill with #e65100, change the blend mode to soft light, then Effects, edge effects, enhance. Then go to Adjust and sharpen once. Move down to just above the paper layer.
Resize sun #2 to 50% and duplicate and place on each side of the Orange Delight wordart, move below the rectangle layer.
Paste Sparkles #2 and move down and to the right some, then duplicate and move up and to the left, place them where you like the looks of them.
Merge visible and add the AAA Frame-Foto Frame with the width at 5 and the opacity at 50, all else at default.
Add your copyright and name now.
For the Avator
Open a new image 150 x 150
Copy  and paste your tag you just finished and resize to 80%,
merge visible and apply the Foto Frame to this.
Add your copyright and name or initial and you are done.
Hope you enjoyed doing this tut.

Down on the Farm-Forum Set-FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Shawn McManus.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Norwegian Farm by Eileen Designs HERE

Xero Filter-Clarity
Filter Factory N-Wee Scratches
Mura Meister-Copies

Font Jayne Print YOFF 

Drop Shadow usually V2 H2 50 black

Let's get started

Remember to add your drop shadow as you go along.

This tube just made me smile looking at it, so decided to do a tut with it...lol...easy one to do also

Open a new image 600 x 250
Copy your tube and apply Mura Meister filter-Copies with wallpaper rotate
at default setting. Then apply Filter Factory N-Wee Scratches at 255
Copy and paste element #59 move to one side and duplicate and move to the other side matching the ends together.
Resize element #23 to 65% paste and move to the right.
Change the blend mode to Luminance(L).
Resize element #15 to 90% paste and move to the left side.
Paste element #21 and position where you like the looks of it.
Resize element #63 to 50% and place on the right side and move under the grass and sharpen once.
Resize element #45 to 30% and free rotate to the left at 20% and place on the crate, like it is hanging off of it.
Resize element #28 to 30% and place on the rope part of the sign and then duplicate and mirror and place on the left side, duplicate and flip and adjust if needed.

Copy and paste your tube and move to the left side of the tag.

Resize element #54 to 17% or what you prefer for size, duplicate and mirror and place both on the right side.
On the sign I typed out Howdy and rotated to fit the sign.
At this point copy merged and paste as a new image for use on the Avator later. If not the wordart will show on it.
Then I typed out Have a Nice Day, and then selected all, float defloat expand by 2, new raster layer and filled with black, add noise at 50% and moved below the white wordart.
Everything look good to you, then merge visible and apply the xero filter-Clarity. 
Then select all, new raster layer, fill with a dark color from your tube, contract by 3, delete and add noise at 50%.
Now add your copyright and name.
For the Avator
Open  a new image 150 x 150
Copy and paste the image you saved for this and resize to 65% and move it until you see the howdy on the sign.
Then merge visible and apply the xero filter-Clarity.
For the frame, select all, new layer, fill with darker color from your tube, contract by 3 and delete and add noise at 50%.
Add your copyright and name and that is it
Hope you have enjoyed doing this tut.

Girl's Attitude-No Scraps

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

Eye Candy 4000-Chrome and Gradient Glow (Optional)

Filter-dsb flux-Bubbles

Xero Filter-Caravaggio, Porcelain and soft mood

WSL_Mask 254, get it HERE

Template #1 by Stu HERE

Font KaliGraff   

Drop Shadow usually V2 H2 50 5

Let's get started

Open the template and duplicate and close the original.

Go to Image, Canvas size and change it to 800 x 800 or whatever size you are use to working on

I like room to work, can resize later.

Delete the copyright from the template.

Fill with color of choice and apply your mask, delete and merge group.
Go to Effects, texture effects, weave and apply with these settings on mask, 
1, 9, 1 both colors white and fill gap checked.
On the Stripe circle layer, go to Adjust, hue and saturation, colorize and set both to 150 or to one that matches your tube.
Now take your magic wand and click on the black sections of the striped circle, and add a new raster layer and fill with a color of choice from your tube. I made a gradient with mine, darker color for foreground and lighter color for background, then go to gradient and select yours.
Apply the filter dsb flux-Bubbles with all numbers set at 50,  select none.
On your right square and left back, select float, defloat, add a new raster layer and fill with a color of choice, I used #021330,  then copy and paste your closeup tube, position in place and then, invert and delete. You will want to mirror the tube for the left back.
Apply the xero filter-Caravaggio to both.

Select the center circle layer now, select all, float, defloat, paste your close up and move into place, invert and delete.
Apply the xero filter-Porcelain to this.
Take your full tube, resize if needed and mirror and place on the right side below the black rectangle, then duplicate and move to the top layer and erase part of her leg over the wordart.
On the left square back, right square back and circle back I applied noise at 50% to all these.
Select the small R and L circles, float, defloat and paste your full tube's face, invert and delete. Change the blend mode to hard light and then apply the xero filter, soft mood. Do this for each small circle.
 I applied the same Hue and Saturation as before on the small circles also.
On the wordart use your change to target brush and go across the wordart first with a color of choice. Then take your magic wand and click inside each white letter, apply EyeCandy4000-Chrome at default setting and then use your change to target brush again and using the gradient you made before, brush the chrome with that gradient, select none.
On the thin rectangle apply a fat gradient glow with the first color being black and the second color the darker one from your tube. Go to Effects, texture effects, weave and apply with these settings
1, 9, 1 both colors white and fill gap checked.
If you want to add a couple of the silver brads, then take your preset shape and on circle, draw out a small circle and apply the EyeCandy4000 Chrome. Duplicate a couple of times and place.
Add some sparkles on top of your tag and if happy with it all, merge visible and resize now.
I am loving this xero filter Clarity now, (optional).  I applied it to the merged tag, or if you prefer you can go to Adjust and sharpen your tag a couple of times.
Add your copyright and name now.
Hope you enjoyed doing this tut.

Wanting FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Zlata_M.

This is an Exclusive, you can join their Exclusive Club to get this one. 

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD HERE

Supplies Needed

I used PSPX...but any of them should work.

Raspberry Road Cluster Frame HERE

Limited Time Add on kit to go with the frame HERE

Be sure to check out all their other offers they have for you.

WSL_Mask 223 HERE

Xero Filter-Soft Mood, Radiance and Clarity

PhotoEffex-Scanlines

Font Romance Fatal  

Drop Shadow usually V2 H2 50 black

Let's get started
This is an easy one.

Remember to add your drop shadow as you go along.

Open a new image to whatever size you like working with.

I usually will do either 700 x 700 or 800 x 800

I prefer to have alot of room to work on.

Paste paper #6 and apply your mask, delete and merge group.

Apply the PhotoEffex-Scanlines with the width at 2 and the noise at 25%

Open your frame and resize to 20% and paste onto your new image. Take your Selection tool and draw a rectangle over your frame, copy and paste paper #1 from the add on kit or choose a color you would like to use, then invert and delete.

Move below the frame, do not deselect yet.

Take your close up tube and paste below the frame and move to the right and up some, hit your delete key to get rid of the excess tube outside the frame,  then duplicate and mirror and move down more on the left side, delete.

On the tube on the right apply xero filter-Soft Mood.

The tube on the left apply the xero filter-Radiance.

Take elements #3 and #11, resize to 15%.  Free rotate #11 right at 20%, all layers unchecked, place on the right side of the frame just below the tube layer.

Resize element #24 to 15% and free rotate to the left 20% and place on the left side of the frame below the tube.

Once happy with everything, merge visible and resize.

Add the xero filter-clarity to the whole tag now.

Add your copyright and name and save as a png

Life - Forum Set FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Katerina Koukiotis.

You need a license to use this art work. Please do not use without a license.

You can find this art at PSP Tube Stop  HERE

Supplies Needed

I used PSPX...but any of them should work.
Filter Factory N-Wee Scratches
PhotoEffex-Scanlines
Xero Filter-Clarity
Mura Meister-Copies
Xenofex2-Constellation filter(optional)
Wordart HERE
Scroll down some
Font Lucida Sans Unicode comes with psp

Drop Shadow usually V2 H2 50 5

Let's get started

Open a new image 600 x250 and fill with a gradient color from your tube.

Foreground being the darker color and the background the lighter color. Then gradient angle 45, repeat of 3.

Paste your tube and mura meister filter, wallpaper rotate at default setting.

Then apply Filter Factory N-Wee Scratches at 255

Apply PhotoEffex-Scanlines, change the width to 5 and the noise amount to 50, all else at default setting.

Paste your tube and move over to one side or the other, duplicate and move up and over so the skirt is showing more and change the blend mode to screen, this one should be below the other tube.

Apply the Xero Filter-Clarity and then the drop shadow on your main tube, I used V-2, H-2, 50, 15 and the dark color from the tube.

Resize your wordart to 25% and paste on the other side.

Then select all, float, defloat, new raster layer, fill with white, then another new raster layer, expand by 2 and fill with a darker color from your tube, add noise at 50% and move below the white layer, delete your wordart now.

Take your pen tool and change your line style to diamond and width to 5, hold down your shift key and draw a line across, change to raster layer, duplicate and flip, move both behind your tube layer.

Merge visible, select all, new raster layer, fill with white, contract by 2, delete. Add a new raster layer again, fill with the darker color, contract by 2, delete and select none.

Once happy with it all, merge visible and add your copyright and name.

On the name I did the wee scratch on the top layer.

If you want to animate the flower, take your free hand selection tool and draw around the flower. Apply the Alien Skin-Xenofex2- Constellation filter with these settings

2.49, 3, 3, 7, 100, 100

select none and

Copy merged layer and paste into animation shop.

Come back to psp undo the select none and undo the constellation, then apply constellation again, but hit the random seed. Take to animation and paste after current frame.

Go back to psp and do all this one more time and back to animation. You should have 3 frames. Test your animation and if happy save your tag.

Now for the Avator

Open a new image 150 x 150

Copy and paste your finished tag and resize to 85% and mirror and move a bit into place, merge visible and do the frame as before.

Add your copyright and license # and name or initial.

If you want to animate the flower, do the same as before.

Hope you enjoyed doing this tut.