Wednesday, February 22, 2017
Tuesday, February 21, 2017
CT PTU Feminine Beauty
This tut was written for those with a basic knowledge of psp.
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Femininity Lil Mz's Brainstorm HERE
Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open a new image 800x800, paste paper 15, apply your mask, delete, merge group.
Paste element 98, then element 23 on top of that, resize both to 95%, click inside
the lower frame with your magic wand,
expand by 5, paste paper 8, invert, delete, then
paste your close up, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode to
hard light, then apply the Xero filter-Clarity, then Soft Vignette with these settings,
Elliptical, Foreground color, have your foreground color on black,
Diagonal dots
1, 1, 1, 0, 255
merge down.
Resize element 53 to 40%, apply Mura Meister Copies-Encircle, change the first
number to 16, paste on the mask layer.
Resize your tube to 45%, paste on the left side of the frame.
Resize element 37 to 35%, paste on the frame below the tube on the left, duplicate,
mirror.
Resize element 41 to 60%, paste on the right below the flowers, duplicate, mirror.
Resize element 102 to 40%, paste in front of the tube by the legs.
Resize element 57 to 55%, paste on the left below the tube.
Resize element 54 to 40%, paste in front of the tube on the left of the dog.
Resize element 99 to 50%, paste in front of the coffee cup, below the dog layer.
Resize element 39 to 40%, paste below the tube layer on the right.
Resize element 46 to 50%, paste on the right under the flower.
Resize element 47 to 30%, paste above the chain you just placed.
Resize element 2 to 40%, paste below the lipstick and up just a bit on the right.
Resize element 50 to 65%, paste below the perfume on the right.
Resize element 76 to 55%, paste on the right below the tube layer.
Resize element 43 to 40%, paste below the lipstick layer on the right.
Being on the layer just below the dog, paste element 34, move to the left,
erase any part you don't want on either tube, duplicate, mirror, erase the parts on
the face and any overlapping.
Resize element 89 to 40%, paste on the left below the flowers, duplicate, move up some,
duplicate twice more, mirror both and adjust on the right below the flowers.
Add any other elements you would like.
Open a new image 800x800, paste paper 15, apply your mask, delete, merge group.
Paste element 98, then element 23 on top of that, resize both to 95%, click inside
the lower frame with your magic wand,
expand by 5, paste paper 8, invert, delete, then
paste your close up, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode to
hard light, then apply the Xero filter-Clarity, then Soft Vignette with these settings,
Elliptical, Foreground color, have your foreground color on black,
Diagonal dots
1, 1, 1, 0, 255
merge down.
Resize element 53 to 40%, apply Mura Meister Copies-Encircle, change the first
number to 16, paste on the mask layer.
Resize your tube to 45%, paste on the left side of the frame.
Resize element 37 to 35%, paste on the frame below the tube on the left, duplicate,
mirror.
Resize element 41 to 60%, paste on the right below the flowers, duplicate, mirror.
Resize element 102 to 40%, paste in front of the tube by the legs.
Resize element 57 to 55%, paste on the left below the tube.
Resize element 54 to 40%, paste in front of the tube on the left of the dog.
Resize element 99 to 50%, paste in front of the coffee cup, below the dog layer.
Resize element 39 to 40%, paste below the tube layer on the right.
Resize element 46 to 50%, paste on the right under the flower.
Resize element 47 to 30%, paste above the chain you just placed.
Resize element 2 to 40%, paste below the lipstick and up just a bit on the right.
Resize element 50 to 65%, paste below the perfume on the right.
Resize element 76 to 55%, paste on the right below the tube layer.
Resize element 43 to 40%, paste below the lipstick layer on the right.
Being on the layer just below the dog, paste element 34, move to the left,
erase any part you don't want on either tube, duplicate, mirror, erase the parts on
the face and any overlapping.
Resize element 89 to 40%, paste on the left below the flowers, duplicate, move up some,
duplicate twice more, mirror both and adjust on the right below the flowers.
Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Beer Celebration
This tut was written for those with a basic knowledge of psp.
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Celebrations of Beer Lil Mz's Brainstorm HERE
Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open a new image 800x800, paste paper 5, apply your mask, delete, merge group.
Past element 22, click inside with your magic wand, expand by 5, paste paper 9,
invert, delete, paste your close up, delete, select none.
Resize element 56 to 70%, paste off center to the left.
Open a new image 800x800, paste paper 5, apply your mask, delete, merge group.
Past element 22, click inside with your magic wand, expand by 5, paste paper 9,
invert, delete, paste your close up, delete, select none.
Resize element 56 to 70%, paste off center to the left.
Resize your tube to 45%, paste behind the table to the right being on
the frame layer.
Resize element 29 to 25%, place on the table.
Resize element 27 to 40%, mirror, paste on the table on the right, duplicate,
mirror, place on the left at the bottom and once coins are pasted, move
on top of them.
Resize element 4 to 25%, paste by the tube legs.
Resize element 28 to 35%, paste at the bottom on the left above the table leg,
duplicate, move over by the hat.
Paste element 37 above the mask layer at the top, duplicate, move down to the bottom more.
Paste element 8 on the frame layer, free rotate to the left at 90 degrees.
Resize element 7 to 25%, paste at the bottom by the hat.
Resize element 19 to 45%, paste on the table below the leprechaun.
Resize element 23 to 45%, paste on the table below the other beers.
Resize element 10 to 25%, free rotate to the left at 20 degrees.
Paste element 93 on the mask layer and up a bit, click inside with your magic wand,
expand by 5, paste paper 5, invert, delete.
Resize element 50 to 25%, paste at the bottom below the coins, move up a bit while applying
the filter, Mura Meister Copies-Glob, change the first number to 20, move below
the paper frame on the left, duplicate, mirror.
Resize element 14 to 35%, paste at the bottom by the horseshoe.
Resize element 11 to 70%, paste about center on the right below all the paper layers of frames,
duplicate, mirror, move down to the lower left.
Resize element 100 to 60%, paste one behind the tube layer on the right, duplicate,
mirror, move above the string on the left.
Resize element 30 to 25%, place on the lower left.
the frame layer.
Resize element 29 to 25%, place on the table.
Resize element 27 to 40%, mirror, paste on the table on the right, duplicate,
mirror, place on the left at the bottom and once coins are pasted, move
on top of them.
Resize element 4 to 25%, paste by the tube legs.
Resize element 28 to 35%, paste at the bottom on the left above the table leg,
duplicate, move over by the hat.
Paste element 37 above the mask layer at the top, duplicate, move down to the bottom more.
Paste element 8 on the frame layer, free rotate to the left at 90 degrees.
Resize element 7 to 25%, paste at the bottom by the hat.
Resize element 19 to 45%, paste on the table below the leprechaun.
Resize element 23 to 45%, paste on the table below the other beers.
Resize element 10 to 25%, free rotate to the left at 20 degrees.
Paste element 93 on the mask layer and up a bit, click inside with your magic wand,
expand by 5, paste paper 5, invert, delete.
Resize element 50 to 25%, paste at the bottom below the coins, move up a bit while applying
the filter, Mura Meister Copies-Glob, change the first number to 20, move below
the paper frame on the left, duplicate, mirror.
Resize element 14 to 35%, paste at the bottom by the horseshoe.
Resize element 11 to 70%, paste about center on the right below all the paper layers of frames,
duplicate, mirror, move down to the lower left.
Resize element 100 to 60%, paste one behind the tube layer on the right, duplicate,
mirror, move above the string on the left.
Resize element 30 to 25%, place on the lower left.
Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Monday, February 20, 2017
Spring Beauty
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Kajenna.
Tube is called Spring
Tube is called Spring
You need a license to use this art work. Please do not use without a license.
You can find this art at the PFD store HERE
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Celtic Spring by Irish Princess Designs HERE
This kit is BEAUTIFUL, the colors are awesome, you will love tagging with
this kit for your Spring and St Patrick tags.
This kit is BEAUTIFUL, the colors are awesome, you will love tagging with
this kit for your Spring and St Patrick tags.
Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open a new image 800x800, paste paper 11, apply your mask, delete, merge group.
Resize element 72 to 75%, free rotate to the left at 10 degree, click inside with your magic wand, expand by 5, resize your tube to 75%, paste below the frame, invert, delete,
select none.
Resize your tube to 32%, mirror, paste on the right side of the frame.
Resize element 97 to 55%, mirror, paste on the left above the frame.
Resize element 81 to 50%, paste on the left on the flower layer.
Resize element 78 to 75%, paste on the right below the tube layer.
Resize element 25 to 65%, paste above the tube layer at the bottom to cover
the straight edge.
Resize element 80 to 45%, paste on the right being on the top layer.
Resize element 14 to 35%, paste on the right below the harp.
Resize element 89 to 25%, paste on the left below the flower layers.
Resize element 39 to 75%, mirror, paste just above the mask layer at the lower left.
Resize element 34 to 50%, paste on the left below the flowers.
Resize element 29 to 35%, paste on the left above the branch you just pasted, duplicate, mirror, free rotate to the right at 90 degrees, move above the harp layer..
Resize element 96 to 15%, duplicate, place them by the basket at the bottom.
Resize element 91 to 20%, paste at the bottom under the flower layer.
Resize element 56 to 50%, mirror, free rotate to the left at 50 degrees, paste at the upper left, duplicate, mirror.
Resize element 95 to 25%, mirror, paste at the lower left, being on the top layer,
duplicate, resize to 75%, move to the top where you like.
Paste element 50 just above the mask layer on the upper right.
Paste element 22 on the top layer, erase the part on the face in the frame.
Resize element 81 to 60%, paste the small part on the harp and erase the rest.
Add any other elements you would like to add.
Open a new image 800x800, paste paper 11, apply your mask, delete, merge group.
Resize element 72 to 75%, free rotate to the left at 10 degree, click inside with your magic wand, expand by 5, resize your tube to 75%, paste below the frame, invert, delete,
select none.
Resize your tube to 32%, mirror, paste on the right side of the frame.
Resize element 97 to 55%, mirror, paste on the left above the frame.
Resize element 81 to 50%, paste on the left on the flower layer.
Resize element 78 to 75%, paste on the right below the tube layer.
Resize element 25 to 65%, paste above the tube layer at the bottom to cover
the straight edge.
Resize element 80 to 45%, paste on the right being on the top layer.
Resize element 14 to 35%, paste on the right below the harp.
Resize element 89 to 25%, paste on the left below the flower layers.
Resize element 39 to 75%, mirror, paste just above the mask layer at the lower left.
Resize element 34 to 50%, paste on the left below the flowers.
Resize element 29 to 35%, paste on the left above the branch you just pasted, duplicate, mirror, free rotate to the right at 90 degrees, move above the harp layer..
Resize element 96 to 15%, duplicate, place them by the basket at the bottom.
Resize element 91 to 20%, paste at the bottom under the flower layer.
Resize element 56 to 50%, mirror, free rotate to the left at 50 degrees, paste at the upper left, duplicate, mirror.
Resize element 95 to 25%, mirror, paste at the lower left, being on the top layer,
duplicate, resize to 75%, move to the top where you like.
Paste element 50 just above the mask layer on the upper right.
Paste element 22 on the top layer, erase the part on the face in the frame.
Resize element 81 to 60%, paste the small part on the harp and erase the rest.
Add any other elements you would like to add.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Sunday, February 19, 2017
CT PTU Irish Lassie 3 Piece Set
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Alicia Mujica
Tube is called St Patrick's Special Pack 2017 tube 1
Tube is called St Patrick's Special Pack 2017 tube 1
You need a license to use this art work. Please do not use without a license.
You can find this art at her store HERE
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Royally Irish by Irish Princess Designs HERE
Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open a new image 800x800, paste paper 29, apply your mask, delete, merge group,
and I mirrored my mask.
Resize element 22 to 90%, click inside with the magic wand, expand by 5, paste paper 27,
invert, delete, select none.
Resize your tube to 35%, paste on the left side of the frame.
Paste element 52, mirror, paste on the left behind your tube.
Mirror element Ail 3, paste on the frame layer and move to the right just a bit.
Paste element 3 on the right at the bottom, resize to 40%.
Resize IAH element 96 to 40%, paste on the left above the tube layer by the foot.
Paste Lucky Collab CUE18 at the bottom below the tube layer, duplicate, mirror.
Paste element IAH 77 above the gold fleck layers you just pasted.
Resize CUD Designer Mix 409 to 40%, paste on the left below the shoe, duplicate, mirror,
move below the horseshoe layer.
Resize AIL element 24 to 25%, paste at the bottom on the right of the tube.
Paste element 16 below the tube layer and adjust how you like.
Resize element 27 to 50%, paste on the right below the vine, mushroom layer and down some,
duplicate, move up just a bit,
duplicate again, mirror, move down some behind the violin.
If you are going to do the Signature and Avator, don't merge your tag just yet.
Signature
Oen a new image, 600x250, paste paper 27.
Paste the mushroom vine frame on the right more.
Paste your tube on the left.
Paste the violin, mirror, resize to 70% and move to the left below the tube.
Paste the gold fleck layer at the bottom, duplicate, move over.
Paste the clover and coin layer at the bottom, above the fleck layer.
Resize the horseshoe to 60%, paste on the right.
Paste the white flower on one side, duplicate, mirror, adjust to your liking.
Add any other elements if you like, then merge visible, add your frame.
I used AAA Frames-Foto Frame with the width set at 3 and everything else at default.
Add your copyright and name.
Avator
A size that is allowed for your group or forum
Mine is 200x200
I took the tag from the Signature, resized it to 90%, pasted so the mushroom
part was showing, if you prefer the tube part showing, that is up to you.
Make it your own.
Once happy, merge visible, add your frame with the same settings as before.
Add your copyright and name.
Now back to your tag, add any other elements you would like.
Open a new image 800x800, paste paper 29, apply your mask, delete, merge group,
and I mirrored my mask.
Resize element 22 to 90%, click inside with the magic wand, expand by 5, paste paper 27,
invert, delete, select none.
Resize your tube to 35%, paste on the left side of the frame.
Paste element 52, mirror, paste on the left behind your tube.
Mirror element Ail 3, paste on the frame layer and move to the right just a bit.
Paste element 3 on the right at the bottom, resize to 40%.
Resize IAH element 96 to 40%, paste on the left above the tube layer by the foot.
Paste Lucky Collab CUE18 at the bottom below the tube layer, duplicate, mirror.
Paste element IAH 77 above the gold fleck layers you just pasted.
Resize CUD Designer Mix 409 to 40%, paste on the left below the shoe, duplicate, mirror,
move below the horseshoe layer.
Resize AIL element 24 to 25%, paste at the bottom on the right of the tube.
Paste element 16 below the tube layer and adjust how you like.
Resize element 27 to 50%, paste on the right below the vine, mushroom layer and down some,
duplicate, move up just a bit,
duplicate again, mirror, move down some behind the violin.
If you are going to do the Signature and Avator, don't merge your tag just yet.
Signature
Oen a new image, 600x250, paste paper 27.
Paste the mushroom vine frame on the right more.
Paste your tube on the left.
Paste the violin, mirror, resize to 70% and move to the left below the tube.
Paste the gold fleck layer at the bottom, duplicate, move over.
Paste the clover and coin layer at the bottom, above the fleck layer.
Resize the horseshoe to 60%, paste on the right.
Paste the white flower on one side, duplicate, mirror, adjust to your liking.
Add any other elements if you like, then merge visible, add your frame.
I used AAA Frames-Foto Frame with the width set at 3 and everything else at default.
Add your copyright and name.
Avator
A size that is allowed for your group or forum
Mine is 200x200
I took the tag from the Signature, resized it to 90%, pasted so the mushroom
part was showing, if you prefer the tube part showing, that is up to you.
Make it your own.
Once happy, merge visible, add your frame with the same settings as before.
Add your copyright and name.
Now back to your tag, add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Cluster Tag Show Offs Crimson Clockwork
Showing off some tags I made using PTU Clusters made by Lady Dragus
Using the beautiful, awesome kit Crimson Clockwork by Irish Princess Designs
You will want to purchase these Clusters for your Steampunk tagging fun.
Go check them out and check out all the other awesome PTU Clusters while you are there.
Artist I used was VeryMany
Artist I used was VeryMany
and KIT at one of these stores
CT PTU Steampunk Lady
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of VeryMany.
Tube is called Steampunk Lady
Tube is called Steampunk Lady
You need a license to use this art work. Please do not use without a license.
You can find this art at the store HERE
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Crimson Clockwork by Irish Princess Designs HERE
Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open a new image 800x800, paste paper 11, apply your mask, delete, merge group.
Paste element 93, resize to 90%, click inside with the magic wand, expand by 5,
paste your close up tube, invert, delete.
Duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to Screen,
then apply the Xero filter Greyscaler, merge down.
Then apply Unplugged Tools-Interlace with these numbers
17, 50, 1, 0
Resize your tube to 50%, paste on the right above the frame.
Paste element 83, mirror and move to the left.
Resize element 23 to 50%, paste on the right above the tube, duplicate, mirror, move
up a bit on the left., duplicate twice, more, move to just above the mask and up a bit.
Resize element 9 to 25%, paste below the red bush on the left, duplicate, move up some, duplicate again, mirror, move below the other red bush about center,
duplicate, move up on the right behind the tube layers.
Resize element 3 to 50%, paste below the tube.
Resize element 2 to 75%, paste on the right below the red bush.
Resize element 5 to 75%, mirror, paste above the clock layer on the right.
Resize element 16 to 35%, paste on the left in front of the bicycle.
Resize element 81 to 40%, paste by the chest.
Resize element 68 to 25%, paste by the camera.
Resize element 71 to 25%, paste by the camera.
Resize element 25, paste under the bicycle layer at the bottom.
Paste element 34 just above the mask layer on the upper left.
Resize element 88 to 60%, add a fat gradient glow and paste at the lower right.
Add any other elements you would like.
Open a new image 800x800, paste paper 11, apply your mask, delete, merge group.
Paste element 93, resize to 90%, click inside with the magic wand, expand by 5,
paste your close up tube, invert, delete.
Duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to Screen,
then apply the Xero filter Greyscaler, merge down.
Then apply Unplugged Tools-Interlace with these numbers
17, 50, 1, 0
Resize your tube to 50%, paste on the right above the frame.
Paste element 83, mirror and move to the left.
Resize element 23 to 50%, paste on the right above the tube, duplicate, mirror, move
up a bit on the left., duplicate twice, more, move to just above the mask and up a bit.
Resize element 9 to 25%, paste below the red bush on the left, duplicate, move up some, duplicate again, mirror, move below the other red bush about center,
duplicate, move up on the right behind the tube layers.
Resize element 3 to 50%, paste below the tube.
Resize element 2 to 75%, paste on the right below the red bush.
Resize element 5 to 75%, mirror, paste above the clock layer on the right.
Resize element 16 to 35%, paste on the left in front of the bicycle.
Resize element 81 to 40%, paste by the chest.
Resize element 68 to 25%, paste by the camera.
Resize element 71 to 25%, paste by the camera.
Resize element 25, paste under the bicycle layer at the bottom.
Paste element 34 just above the mask layer on the upper left.
Resize element 88 to 60%, add a fat gradient glow and paste at the lower right.
Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.
Subscribe to:
Posts (Atom)