Sweet Valentine FTU



 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO store HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap by Delicious called Sweet Valentine HERE

Oliver's Filter-Toile d'Araignee
Animated Hearts #205 by Scrappy Bit of Fun HERE

Font Tagettes

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 600 x 250
Copy and paste paper #3, resize to 20% and then crop.

Resize the dotted border to 15%, paste and move down until you see the top dotted border, then duplicate, flip and erase and little bits in the corners going paste the other frame.

Resize the leaves #2 to 10% and place on one side, duplicate and mirror and adjust on the other side. Apply the Oliver Filter-Toile d'Araignee at 50% on the leaves.

Resize the frame to 10% and place in the center.

Resize the Valentine Tag to 5% and place on the left and down some on the frame.

Resize the bow to 12% and place on the upper left of the frame.

Copy and paste your tube and place in the center of your tag.

Crop your tag again, then select all, new raster layer, fill with a color from your tube, contract by 3, delete and select none.
Add noise at 50% to the frame.

Merge your frame down to the tube layer, then merge down again with the Valentine circle tag,  add your copyrights and name at this time and merge with the above layers, close this off for now.
I added the Olive filter to the name also.

Copy merged the rest of your tag to animation shop.
If using the same animation, make 21 layers of your tag.
Click on the animation, edit, select all, copy, then go to your tag, edit, select all and paste into selected frame.
I pasted the animation three times.

Then go back to psp and close off the other layers and reopen the one with your tube.

Copy to animation shop, make 21 layers, edit, copy, then go to the one with the animation, edit, copy and paste into selected frame. Taking care to line the frame up on your tag.

For the Avator
Open a new image 150 x 200
I went back and undid the layers until the Valentine Circle tag was no longer merged with the others.
Close off  your tube layer now and copy merged the rest of the tag into the new image, resize to 80%, position so the valentine tag shows.
Now paste your tube and resize to 80% and position how you like it, merge visible.
Select all, new raster layer, fill with color from your tube, contract by 3, and delete, select none. Add noise at 50% to the frame.

Be sure all copyrights have been added to your tag.
Add your name and that is it

Hope you enjoyed doing this tut.

The Journey FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Bike Night by Digicats & Dogs HERE

WSL_Mask84 HERE
Xero Filter-Soft Mood
EyeCandy4000-Gradient Glow

Font Sick Capital Vice 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, size of choice
I usually make mine 800 x 800 and resize later.

Paste paper #4 and apply your mask, delete and merge group.
Paste frame #3 and resize to 75%, take your magic wand and click inside, be sure to click inside the chain areas also, expand by 3, paste paper #20, invert and delete.
Do not deselect yet, copy and paste your closeup and mirror,
move to the left some, delete and select none.
Apply the Xero Filter-Soft Mood to your closeup.
Close off your mask layer and once your drop shadows have been added, merge visible. Reopen your mask now.
Duplicate your merged frame layer and resize to 60% and mirror and move down on the right side.
Paste your main tube with the bike, now adjust the frames to where you like the looks of them.
I moved the bigger one over and up on the left side.
Resize the Journey wordart to 50% and place at the top on the right side and take your color to target brush and change the color to one you like from your tube.
Go to Effects, inner bevel with these settings
Bevel shape2, width 5
15, 3, 5, 0
273, 34, 42
then click ok
Apply EyeCandy4000, medium white gradient glow
Paste the barb wire and move below the tube layer with the bike, duplicate and move below the closeup layer and up.
Resize one of the bottle caps to 35% and place where the frames come together on the right, duplicate and move to the top and to the left.
Resize the platinum flourish to 90% and move to the bottom layers just above the mask layer.
Once happy with it all, merge visible and resize.
Be sure all copyrights have been added to your tag.
Add your name and that is it

Hope you enjoyed doing this tut.

Remember Moments (Limited Time Freebie)

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.

 

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Life in Pictures (Limited Time freebie)

by Raspberry Road Designs HERE

WSL_Mask84  HERE
Xero Filter-Soft Mood and Mistifier

Font Simply Glamorous 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, size of choice
I usually make mine 800 x 800 and resize later.

Resize paper 1 and apply your mask, delete and merge group, duplicate and change the blend mode to burn, then merge down.

Open element #23 and resize to 25%, take your magic wand and click inside the right two openings, expand by 2 and paste your closeup tube, invert and delete. Move below the film strip. Apply the Xero filter-Soft Mood and then Mistifier, changing the hazeness to 140.

Resize element #13 to 50% and mirror, then free rotate to the left by 20.

Resize element #10 to 25% and free rotate to the left by 20%.
Resize element #1 to 25% and place on the left side.

Copy and paste your tube and resize if needed, duplicate, gaussian blur at 4, change the blend mode to overlay or one you prefer.

Then take the camera that comes with the tube and resize that to 50% and place behind your tube and to the right a little bit.

Resize element #27 to 35% and move to the bottom layer and to the left, duplicate mirror and flip.

Resize element #20 to 20% and place at the bottom of the tag on the top layer, then duplicate, flip and move down to below the camera tube layer.

Resize element #9 to 20% and place just above the bottom layer, duplicate and mirror.

Resize element #14 to 20% and place on one side and move down about 5 layers, duplicate and mirror, adjust to your liking.

Open element #26 and resize to 30% and place at the bottom of tube and erase some of the leg area of the tube. Add a white medium gradient glow to the wordart.

Resize element #24 to 15% and place below the wordart layer and adjust.
You may have to erase some of the squiggly elements that is showing below.

Resize element #2 to 15%, duplicate and place on each side below the wordart layer.

If you do not want to animate, you are done.

Once happy with it all close off your background if using one, then merge visible and resize.
Now add your copyrights and name
Save your tag as a png and you are done.

To animate, keep your white background open and copy merged to animation shop.
Come back to psp and take your freehand tool and draw around both lights.
Go to Adjust, Brightness and Contrast
Brightness at 15 and Contrast at 5, select none and copy merged to animation shop, paste after current frame.
Test your animation, if happy save.
Be sure all copyrights have been added to your tag

Hope you enjoyed doing this tut.

Gear Yourself Up

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.
Vix PSP: Mask, Templates and Wordart

Goodie Bag Sept HERE

Xero Filter- Radiance, Mistifier and Clarity (Optional)

EyeCandy Impact-Brush Metal
Font Rufa 

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*

Open template SeptGB01, duplicate and close the original, delete the credits.

Image, canvas size, 800 x 800

Fill with #ccbab7 and apply Vix mask GBS0902, delete, then new raster layer, fill with black, apply the mask again, then go to image, free rotate to the left by 25, resize to 96%.

 

Select the left small gear on template, float,defloat, paste the part of your tube you would like there, invert and delete. Apply Xero filter-Radiance and then mistifier.

Do the same with the small right gear with your tube and filters.

Select the large gear, paste your larger tube, invert and delete.

Apply xero filter-Porcelain.

 

Select the large gear frame, apply EyeCandy Impact-Brushed Metal-Hand brushed Steel, small brushes at default setting.

Select the wordart Gear fill, paste your closeup and adjust to your liking, invert and delete.

Apply the xero filter-Radiance and then Mistifier.

 

Apply the EyeCandy Impact-Brushed Metal to the Gear word outline, same settings as before.

Then take one of the wordarts of Vix grab bag, I used the

Beyond Imagination and resized it to 85% and placed at the top of the tag. Add a gradient glow with #74363a or color of choice.

Add this same gradient to the other wordart also.

Once happy with everything, merge visible and resize.
I then added the xero filter-Clarity to the merged tag.
 

Add your copyright and name and you are done.
 

Hope you enjoyed doing this tut.