Red Goth

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Spazzd Art.
The tube is called Red and I am using a matching kit by the same name.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Spazzd Art Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Red by Ginnibug Designz  HERE
You can check out Ginnibug's blog HERE

RR Mask 2_1  HERE

Xero Filter-Soft Vignette

Font of Choice,  I used Ma Sexy

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 16, apply your mask, delete, merge group.
Paste element 15, the goth frame, click inside with your magic wand,
expand by 5, paste paper 14, invert, delete, select none.

If using the same tube as I am, resize to 20%, place on the left side.

Paste element 3 on the left below the tube layer, duplicate, move to the right more and move above the tube layer, placing it by the tube.

Resize element 48 to 50%, place below the tube on the left, raising the black grass up some, duplicate element 48 twice, move to the right.

Resize element 32 to 50%, place above the tube layer moving it more to the right,
duplicate, move to the left below the tube layer, and adjust the other layers up a bit more.

Resize element 109 to 60%, place on top of the frame on the right side,
duplicate, mirror, move below the frame and over to the left and down a bit.

Resize element 63 to 50%, paste just above the frame layer behind the tube, duplicate, mirror and adjust.
Duplicate again and place below the building layer and move toward the center more.

Resize element 43 to 20%, place on the left below the grass layers.

Paste element 42 behind your tube layer, just above the frame layer, duplicate, mirror, resize to 75%, erase any part of the stem showing at the bottom.

Resize element 49 to 20%, place above the building layer and move toward the center more.

Resize element 80 to 25%, place on the paper layer of the frame, duplicate, move up above the frame, duplicate, resize to 75% and place on the paper layer again.

Resize element 92 to 50%, place on the paper layer of the frame below the bats.

Resize element 70 to 30%, mirror and place on the building on the right.

Resize element 66 to 30%, place on the right below the skull arrangement.

Resize 127 to 65%, place below the frame layer at the top, duplicate, mirror and adjust to your liking. You might want to rearrange the bats also.

Resize element 99 to 35%, paste on the paper layer of the frame, change
the blend mode to screen, lower the opacity to 70%.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Tags using First Day by Spazz

CT Tags using the awesome art of Spazz called First Day

 and matching kit by Whisper In The Wind

 

Hurry on over and pick up this tube and kit at her store now.

 

 You can find this art and the kit at the Spazzd Art Store  HERE
http://spazzdart.com/store/

 

CT Tags for Spazz Art

CT Tags using the awesome art of Spazz , tube is called Vixen

and the awesome kit is by Mellie Beans called Shabby Perfection.

 

You can check out Mellie Beans Blog HERE

 

Hurry on over and pick up this tube and kit at Spazz store now.

 

 You can find this art and the kit at the Spazzd Art Store  HERE
http://spazzdart.com/store/

 

Red Hot Love PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Spazzd Art.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Spazzd Art Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Red Hot Love by Kizzed by Kelz  HERE
The Tube is Included with this kit
You can check out Kizzed blog HERE

WSL_Mask 84  HERE

Xero Filter-Soft Vignette

Font of Choice,  I used Ma Sexy

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 3, apply your mask, delete and merge group.
Paste element 46, free rotate to the left at 10 degrees, click inside with your magic wand, expand by 5, paste paper 10 or one you prefer.
Resize your tube to 45%, paste, delete and select none.
Duplicate your tube, go to Adjust, Blur, Gaussian Blur, at 4, change the blend mode to hard light and merge down.
Apply the xero filter-Soft Vignette
Elliptical,  Foreground color,
Diagonal dots
1, 0, 0, 255
On the original tube, resize down to 18%, mirror and place on the right side.

Paste element 40 below the paper layer of the frame, click inside the squares and expand by 1, paste paper 9 invert, delete, paste your smaller tube into the outer squares, delete, select none. Merge the tubes together and change the blend mode to hard light.
Apply the xero filter- Soft Vignette as before.

Resize element 25 to 40%. place more toward the left.
Paste element 37 above the mask layer toward the bottom and erase the edges you don't want to show.
Paste element 4 just above that.
Resize element 20 to 40%, mirror and place on the top layer by the glass.
Resize element 47 to 50%. place above the frame layer at the bottom, duplicate,  mirror, move to just above the film layer and adjust.

Resize element 67 to 75%, flip, place above the mask layer in the upper right area.
Duplicate and move over and down on the left side.
Paste element 63 just above the mask layer at the top, duplicate, flip and place at the bottom. Duplicate a couple more times and place how you like them.

Duplicate the film layer at the bottom of your tag, move up to the top, just above the mask layer.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

She's Beautiful PTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Spazz.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the Spazzd Art Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Shabby Perfection by Mellie Beans
and you can purchase it at the Spazz Store  HERE
Check out Mellie's  blog  HERE

RR Set Mask_2-1  HERE

Xero Filter-Porcelain and Soft Vignette
Mura Meister Copies-Encircle

Font of Choice, I used Mf Queen Leela

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 3, apply your mask, delete and merge group, duplicate and merge down.
Paste frame e44 and resize to 70%, click inside with your magic wand, expand by 5, paste paper 9, resize your tube to what you want, then paste your tube, delete and select none.
Move both the paper and the tube below the frame layer.

Apply the Xero Filter-Porcelain to your tube, then Soft Vignette, set on
Ellipitcal, Foreground color
 Diagonal Dots

Paste your tube, resize to 20% and place on the left side.

Paste e52 just above the mask layers, change the blend mode to overlay.
Resize e14 to 85%, place on one side below the mask layer, duplicate and mirror.

Resize e04 to 70%, erase the stem area, then apply Mura Meister Copies-Encircle,
move below the paper layer of the frame. Then take your Pick tool and pull out to as large as you like behind the frame, then sharpen once.

Resize e50 to 55%, place under your tube layer, duplicate, mirror and adjust.

Resize e38 to 40%, place below the flower layer on one side, duplicate, mirror, duplicate again and move back to the center more.
Resize e34 to 50%, place on the right side, below the leaf layers.
Resize e10 to 50%, place on the left side below the leaf layer.
Resize e05 to 40%, place on the right side below the leaf layers also.

Resize e04 to 60%, flip, move to the bottom layer and bottom of tag showing past the leaf layers, duplicate and mirror.

Resize e25 to 90%, place at the bottom of your tag, refer to my tag for placement.

Resize e29 to 50%, placing on the right side below the flower ring you made.

Resize e22 to 40%, place on the bicycle wheel on the right, duplicate a couple of times and place where you like, mirror one of them.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Tag using the Awesome art of Spazz and kit by Foxys Designz

CT Tags using the awesome art of Spazz and matching kit by

Foxys Designs

Check out her blog HERE

 

Hurry on over and pick up this tube and kit at Spazz store now.

 

 You can find this art and the kit at the Spazzd Art Store  HERE
http://spazzdart.com/store/

 

CT Tags using Spazz Art and PTU Ginnibug Design kit

CT Tags using the awesome art of Spazz and matching kit by

Ginnibug Designz

Check out her blog HERE

Hurry on over and pick up this tube and kit at her store now.

 

 You can find this art and the kit at the Spazzd Art Store  HERE
http://spazzdart.com/store/