Pumpkin Patch This Way PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

You need a license to use this art work. Please do not use without a license.

You can find this art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Born To Fly PTU
by HorsePlay's Pasture Designs  HERE
WSL-Mask 84 HERE
Toadies Filters-What Are You
Xero Filters-Soft Mood and Mistifier
Font Witched 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper 3, apply your mask and delete, merge group.
Paste EL19 and resize to 85%, click inside with your magic wand, expand by 3, paste paper #3, invert and delete.
Paste your closeup tube and delete, select none.
Apply Xero Filter-Soft Mood and then Mistifier, changing the haziness and strength to 152.

Duplicate the frame, and select the bottom one, apply Toadies Filter-What Are You with both numbers set at 16.
Move below the paper layer of the frame.

Paste El72, resize to 90%, free rotate to the left at 90 degrees, move down to just above the mask layer, move to one side, duplicate and mirror, adjust and merge these two layers together.

Resize El4 to 85% and place on the left side of the frame.
Resize El2 to 85% and place behind the pumpkin sign.

Resize and paste your tube on the right side.

Resize El60 to 50%, mirror and place on the right side behind your tube, duplicate resize to 75%, mirror and place back on the right side.
Duplicate twice and move to the left some, behind your tube layer.

Resize El64 to 75%, free rotate to the left at 90 degrees, place below some of the pumpkin layers, duplicate and mirror and move back to the right just a bit.

Resize El24 to 50%, duplicate 4 more times and place 2 by the pumpkin sign and 3 on the right side, moving them below the pumpkin layers. Take your pick tool and rotate the lower one just a little bit.

Resize El49 to 50% and place on the left side in front of the pumpkin sign.

Resize El6 to 25%, place in front of the candy bag, duplicate and place next to the first one.

Paste El68 just above the frame layer that you applied the Toadies filter to, duplicate, flip and mirror.

Back on the top layer, paste El29 to 40% and place more to the left in front of your tube layer.

Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.

Autumn Blessings PTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Eugene Rzhevskii.

You need a license to use this art work. Please do not use without a license.

You can find this art PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Autumn is Almost Here
by SassiDesigns HERE
WSL_Mask 84 HERE
Font Mad Beef 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper #20 and apply your mask, delete and merge group.

Paste frame #9 on your new image, resize to 75%, click inside with your magic wand, expand by 3, paste paper #39, invert and delete,  select none.

Paste your tube and place on the right side

Paste element #81, move under your tube layer, duplicate and mirror.

Resize element #123 to 40% and place on the right side, below the above layer.

Paste element #106 below this layer on the left side, mirror and move up a bit behind the tube layer.

Paste element #148 and place behind your tube layer.

Resize element #142 to 70%, mirror and place on the left side.

Resize element #2 to 40%, place below the frame layer on the left side of the tree.

Paste element #145 on the left side behind the basket layer, duplicate and mirror.

Resize element #149 to 25% and place up in the tree where you like.

Resize element #16 to 65% and place on the left side where you prefer, duplicate, mirror and move below your tube layer and adjust on the right side.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

I'm Beautiful FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Nocturne.

You need a license to use this art work. Please do not use without a license.

You can find this art PFD  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Vintage Kit by Far Far Hill
  HERE
Xero Filter-Radiance and Porcelain
PhotoEffex-Scanlines
WSL_Mask 84 HERE
Font Mardian Demo

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Resize paper 2 to 23%, paste on your new layer and apply your mask, delete and merge group.

Resize element 005 to 35%, paste on your new layer, click inside with your magic wand, expand by 10, paste paper 3, invert and delete, do not deselect yet.
Paste your closeup and place where you want if, then delete and select none.
Duplicate your tube, mirror and move below the first tube, change the blend mode to overlay or one you prefer.
Apply the Xero Filter-Radiance to your lower tube layer.
Apply PhotoEffex-Scanlines to the paper with the width at 1 and leave all the other numbers as is also.
On the other tube apply Xero Filter-Porcelain.

Paste, mirror and resize your tube, if using the same one I am, I resized mine to 47% and place on the right side.

Resize element 0011 to 15%, free rotate to the left at 15 degrees and place on the left side. Duplicate, free rotate to the right at 90 degrees, flip and move below your tube layer at the bottom. Duplicate again, mirror and move below the picture layer.

Resize element 004 to 15% and place on the left side, move below the tube layer.

Resize element 009 to 10% and place below the flower layer how you would like it, rotate to the right at 10 degrees and erase any part of the bottom you do not want showing.
Resize element 006 to 5% and place on the left next to the other picture.

Resize element 012 to 20%, place at the top of the frame.
Resize element 04 to 4% and place on top of the ribbon.

Duplicate twice and place on the mirror, making them appear to be earrings.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

Beautiful Autumn PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Autumn Sunset by Bits N Bobs  HERE
Autumn Temp 2 by Fired by Flamin HERE
Xero Filter-Soft Mood
PhotoEffex-Scanlines
WSL_Mask 84 HERE
Font A Safe Place to Fall 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, duplicate and close the orginial.
Delete the credits.
Go to Image, canvas size and change to a size you prefer, I alway set mine to 800 x 800 and resize later.

Resize paper 15 to 90% and apply your mask, delete and merge group, erase the purple that is showing, then duplicate the mask and flip, merge and move below all the template layers.

Paste BNB-AS37, place where you like, then duplicate and mirror and adjust on the other side.

Paste BNB-AS17, place on one side, moving down some, duplicate and mirror.

Paste BNB-AS58 and move to one side, erase any of the green leaves showing, duplicate and mirror.

Select oval one of the template, resize paper 12 to 90%, paste, invert and delete.

Select oval 2 and apply PhotoEffex-Scanlines, width at 1 and noise at 20.

Select oval 3, resize paper to 90%, paste, invert and delete.

Paste paper 15, invert and delete, paste your middle closeup tube, delete and select none.
Change the blend mode to Luminance (L) and apply xero filter-Soft Mood.

Select the circle border, paste paper 12, add noise at 30%.

Resize element BNB-AS35 to 30%, duplicate a couple of times and place where you like them, refer to my tag.
Then on the original again, resize to 20% and place by the one on the right.

Resize BNB-AS9 to 85%, place on the right side below the rounds you just pasted, move below the rounds and take your pick tool and rotate it to the left to your liking.
If above the tube layer, move below the tube.

Take the wordart, move up and over to the left, then select all, float defloat, add a new raster layer, fill with a color of choice, I used #fed2b2, then select none and move below the wordart, add your drop shadow.

Paste and resize your tube and place on the right side below the wordart.

Resize the 2 butterflies to 25%, duplicate and place where you like. Take your pick and rotate a bit on one or two of them.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

Happy Fall Ya'll PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.

You need a license to use this art work. Please do not use without a license.


You can find this art at PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Autumn Sunset PTU
by HorsePlay's Pasture HERE
Mask0172 by Sophisticat Simone  HERE
Font Mad Beef 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper 3, apply your mask and delete, merge group.
You may want to enlarge your mask later to fit the tag better.

Paste E124 on your mask, click inside with your magic wand, expand by 5, paste paper 1, adjust how you like it, then invert and delete, move below the frame layer.

Resize El1 to 75% and place below the frame layer and move to the left a bit.
Resize El22 to 35% and place on the swing.

Paste El69 and move to the right more.

Paste El20 and move to the right.
Resize and paste your tube and place on the right side above the fence layer.

Paste El12 on the left side, below the tube layer.

Resize El49 to 40% and place on the left side, below the wagon layer.

Resize El55 to 80% and free rotate to the left 35 degrees, place under your tube layer, duplicate a couple of times and move over a little on each one, then merge these layers together and add your drop shadow.

Resize El38 to 50%, place on the right side behind your tube layer.

Resize El52 to 40% and place on the left below the wagon layer and adjust to your liking.

Paste El80 below the fence and wheel layers and duplicate a few times and place them how you like. Maybe resize one or two along the way also.
Do the same with El19, and place where you like.

Resize El58 to 75% and place on the left side in front of the wheel layer.
Resize El18 to 60% and place under your tube layer in the center area.

Being on the frame layer, paste El70 on one side, duplicate and mirror.

Resize El13 to 35% and place on the upper corner of the frame, duplicate and mirror.

 Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.

Witchy Babe FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE
 

Supplies Needed

I used PSPX...but any of them should work.
Scrap kit Witchy Woman by Digicats (&Dogs)  HERE
WSL_Mask 84 HERE
Xero Filter-Porcelain and Radiance
EyeCandy4000, Gradient Glow 
Font Sick Capital Vice for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*


Open a new image 800 x 800, can resize later.
Paste paper #22 and apply mask 84, delete and merge group.

Paste frame #11 on top of the mask layer. Apply Xero Filter-Porcelain to the frame.

Cope and Paste tree #4, apply a thin gradient glow with color of choice. I used #a75118

Resize and paste your tube, place off center just a bit.
Paste the leaves border and move under your tube layer.

Resize cauldron #1 to 60% and place on the right side.

Resize the beware sign to 60% and place on the left side.

Resize the cat to 60% and place below the sign layer and move just a bit to the right of it.

Resize spell book #3 to 35% and place in front of the sign.
Resize bottle #1 to 35% and place below the book layer on the left side.

Resize the moon to 50%, place at the upper left side below the tree layer. Then go to Adjust, Hue and Saturation and have both numbers on 0.

Resize the bat border to 60% and place at the top.

Paste Bubble trails #2 and #5, duplicate both and mirror to the other side and adjust to your liking.

Duplicate your tube, move below the frame layer on the left side, erase any part sticking out of the frame, change the blend mode to Luminance (L), apply Xero filter-Radiance and lower the opacity to 70%.

Add any other elements that you would like.

Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.

Waiting for October PTU

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Angelica S.

You need a license to use this art work. Please do not use without a license.
My license was with SATC but they have since closed

You can find her art at Art for Design Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Autumn is Almost Here
by SassiDesigns HERE
Mask 0172 by Simone aka Scrappy Bit of Fun HERE
Font Great Vibes for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can resize later.

Paste paper #39, apply your mask, delete and merge group.
Paste same paper again and apply your mask, delete and mirror.
Then paste paper 32 and apply the mask again, having it between the other two mask, adjust to your liking.

Paste and resize frame #1 to 80%.
Paste and resize frame #11 to 95%.

Paste element #31, duplicate and line up as one fence.

Paste element #106 and move to one side, duplicate and mirror, moving below the fence layer.

Paste element #48 below the fence layer, duplicate 3 or 4 times or however many you would like and place in different locations, maybe resize one or two to 80% or so.

Paste element #151 on the left side.

Resize element #124 to 75% and place in front of the fence layer in the center. Duplicate, resize to 50% and place on the right side.

Paste element #63 and place on one side, duplicate and mirror.
Paste element #144 on the left side by the wagon.

Paste element #145 and move below the pumpkin layer and duplicate a couple of times and place how you like.

If using the same tube as I am, resize to 57% and place it on the stump as if sitting on it...

Paste element #125 on the upper right side of your tag, below the tube layer.

Resize element #149 to 20% and place on the upper left side of your tag. Duplicate, mirror and place on the small stump on the righ.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

Autumn in the Air PTU

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Marika.

You need a license to use this art work. Please do not use without a license.

You can find her art at CDO  HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Autumn is Almost Here 
by SassiDesigns  HERE
Mask 0174 by Simone aka Scrappy Bit of Fun HERE
Font Great Vibes for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can resize later.

Paste paper #39, apply your mask, delete and merge group.

Paste frame #10 and resize to 80%.
Paste frame #11, resize to 90%.

Paste element #148 and place in the center.

Paste element #64, move to one side, duplicate and move toward the other side.

Paste element #150 and move to the left just a bit.
Paste your tube and place sitting on the leaves in front of the bench.

Paste and resize element #141 to 50% and place just above the mask layer and place how you like it, duplicate and move it over to the left more.

Paste elements #48 and #55 and resize to 60% and place below the bench layer, duplicate a couple of times on each and arrange how you like them.
Resize element #145 to 60% and place below the flower layer on one side, duplicate and mirror and do any adjusting.

Resize element #149 to 20% and place on the bench top on the right side, duplicate, mirror and place up in the tree on the left side.

Resize element #118 to 25% and place on the right side by the bench. Duplicate 2 times and move to the left behind the lamp post.
Resize element #6 to 30% and place in front of the squirrel.

Resize element #135 to 30% and place on the right under the acorns. Duplicate and resize to 60% and place on the bench seat.

Paste element #125 on the upper right and erase the one sticking out.
 
Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

Happy Blue Feeling FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Bits N Bobs.

You need a license to use this art work. Please do not use without a license.

You can find her art HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Feeling Blue by Topcats Tagz  HERE
Xero Filter-Porcelain, Mistifier
WSL_Mask 84 HERE
Font akaDora for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can resize later.

Resize paper 7 to 90% and apply your mask, delete and merge group.

Paste element 5, then go to Image, free rotate and rotate to the left at 45 degrees.
Click inside with your magic wand, expand by 5 and paste paper 7, invert, delete and move below the frame layer, keeping it selected, mirror and paste your closeup tube and adjust to your liking, delete, select none.

Apply Xero Filter-Porcelain with these settings
Softness 75, Strength 150, brightness 128, 0, 0, 255
Then apply Xero Filter-Mistifier

Paste element 26, move below the paper layer, duplicate and move one up some and the other down some, merge these two layers together.
Click inside the small squares with your magic wand, expand by 3, paste paper 18, invert, delete and move below the frame layers.
Resize your main tube to 70%, if using the same tube that I am using and place on the right side.

Paste element 7, and place on the left bottom side on the top frame.

Paste element 11, erase one side, place on upper left side, duplicate, mirror and flip.

Resize element 44 to 75%, duplicate, mirror and place where you like the looks of them.

Resize element 31 to 75% and place on the left side.

Paste element 15 on the left side below the paper layer, duplicate, flip and mirror and adjust to your liking.

Paste element 55 on your tube and place how you like it.

Resize element 24 to 85% and free rotate to the right at 45 degrees, place on one side, duplicate and mirror.

Resize element 38 to 60%, free rotate to the right at 45 degrees and place behind your tube layer and move to the right.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

  

Music Soothes the Soul FTU/ 3 Piece Set



 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  The Hunter.

You need a license to use this art work. Please do not use without a license.

You can find this art at SATC HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Papasserenade 
by Wicked Princess HERE
What you do is click on the tab that explains about mediafire
messing up her links, then click on page 10 tab below and you will find the download link to the kit.

Xero Filter-Soft Mood and Soft Vignette
Gems Mask 117 HERE
Music wordart at CMC HERE
I used the wordart from Lost
Font Before the Rain for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, can resize later.

Resize paper #1 to 85% and paste on your new layer, apply your mask, delete and merge group. Take your pick tool to adjust your mask later.

Paste FrameGold, resize to 85%, click inside with your magic wand, paste paper #1, invert and delete, change the blend mode to burn and sharpen once.
Now paste your closeup and move how you like it, delete and select none.
Apply Xero Filter-Soft Mood, then apply Soft Vignette with these settings
Beam, Solarise, Solid

Resize the carnation spray to 80%, place at the bottom, duplicate, flip, duplicate and move to the center, move below the mask layer.

Resize the violins to 85%, mirror and place on the left side.

Resize the music sheet to 80% and place on the right side.

Resize your tube as needed and place on the right side, I resize my tube to 80%. Paste the floor lamp behind the tube on the right side.

Paste the roses on the upper left side of the frame, duplicate mirror, flip.

Resize the Gramaphone to 50%, place on the left side below the violins layer.

Resize the Sprinkles to 80%, free rotate to the right at 45 degrees, place on one side just above the mask layer, duplicate and mirror, duplicate again and move to the center.

Resize the leaf to 50% and place on the bottom behind the Gramaphone.

Resize books 2 to 50% and place on the left below the leafs layer and adjust, duplicate and mirror, making any adjustment needed to your liking.

Resize the wordart to 55%, select all, float defloat, add a new raster layer, fill with a color of choice, move below.

Add any other elements you would like, if not doing the signature tag and Avator, merge visible. If doing them, do not merge yet.

Add all your copyrights and name and you are done,

For the Signature tag open a new layer 600 x 250, paste paper #1 and crop.
Back on your tag you just finished, close off the tube and wordart and any background you used, copy merged and paste on your new layer, resize to 50%, free rotate to the left at 10 degrees, duplicate and mirror.

Back to your tag open your tube layer and paste and resize to 80% and place in the center.

Paste the wordart and resize to 60% and place on the left side, be sure to sharpen when you resize anything.
Before merging,
For your Avator, open a new image 200 x 200 or whatever your forum or group allows, paste the rotated frame, resize to 90% and add the AAA Frames-Foto Frame to both the signature tag and Avator
Width 4, Matte 2, Opacity 50.
Sharpen once.

Be sure to add all Copyrights and name to all your tags.

Hope you enjoyed doing this tut.

Natural Beauty PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Back to Nature
by Bits N Bobs HERE
Mura Meister Filter-Copies
Xero Filter-Porcelain
WSL_Mask 84 HERE
Font Before the Rain for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, can resize later.

Resize BNB-paper4 to 85%, apply your mask, delete and merge group.
Resize BNB-paper5 to 85%, apply your mask, delete and merge group, resize this mask to 95% and merge your two mask together.

Resize BNB-BTN46 to 50%, then resize BNB-BTN25 to 50% and paste on top of 46, merge down.
Apply Mura Meister Copies-Encircle.

Take your free hand selection tool, draw around the frame you just made, resize BNB-paper4 to 80% and paste, invert and delete, move below the frame, select none.

Resize your tube if needed, paste, move below the frame layer, duplicate, move above the frame layer and erase any part over the frame and then erase the parts below the frame you do not want showing.
Apply Xero Filter-Porcelain to both tubes.

Resize BNB-BTN10 to 75% and place at the bottom of the frame.
Resize BNB-BTN11 to 60%, duplicate and place one on each side of the first one.

Resize BNB-BTN61 to 50% and free rotate at 30 degrees, place below the flower on the right, duplicate and mirror.

Resize BNB-BTN58 to 75% and place below all the flower layers on the left, duplicate and resize again to 75% and place on the left side also.

Resize BNB-BTN30 and 31 to 75% and place behind the tube layer at the top, paste one, then the other one and move off side a bit.

Resize BNB-BTN67 to 20% and place on the ribbon.

Resize BNB-BTN6 to 20%, duplicate a couple of times and place where you like.

Add any other elements you would like, once happy, merge visible and resize.

Add all your copyrights and name and you are done.

Hope you enjoyed doing this tut.

Beauty of Nature Forum Set PTU

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Caron Vinson.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Back to Nature 
by Bits N Bobs HERE
Mura Meister Filter-Copies
Medhi-Weaver
AAA Frames-Foto Frame
Font Santa's Sleigh for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 600 x 250
Resize BNB paper 4 and paste onto your new image.

Apply Medhi filter-Weaver with these settings
Range 150-300,
Size 300

Paste BNB paper 3,  resize it to 75%, place how you want it, then change the blend mode to overlay and lower the opacity to 70%.

Resize BNB-BTN23 to 45%, apply Mura Meister Copies-Line (random rotate), erase any part showing at the top.

Resize BNB-BTN58 to 50%, place on the left side. Resize your full tube to 50%, mirror and place sitting on the mushroom.

Resize BNB-BTN25 to 30%, apply Mura Meister Copies-Line (random rotate) and place on top of the grass layer and move down some.

Paste BNB-BTN40 on the paper layer and adjust how you like it.

Being on the top layer, paste your closeup on the right side.

Resize BNB-BTN6 to 15%, then go to Adjust, Hue and Saturation, colorize with these numbers
Hue 54, Saturation 80 and place where you like.
Duplicate, resize to 75%, mirror and place where you like it.

Resize BNB-BTN59 to 40%, apply Mura Meister Copies-Line (rotate), flip and place between the grass layer and the leave layer and adjust to your liking.

Add any other elements that you would like.
Once happy, merge visible, and apply the AAA Foto Frame, width at 5, Matte at 2, Opacity at 50.

For the Avator, I opened a new layer 150 x 200, but you may need to change the size, depending on your group or forum size requirements.
Paste your image, resize to 85%, merge visible and apply the AAA Foto Frame as before.

Add all your copyrights and name and you are done.

Hope you enjoyed doing this tut.

Autumn Friends FTU

This tut was written for those with a basic knowledge of psp.

I am not using a tube for this tut.

Everything is supplied in the Scrap kit.

If at anytime the kit maker decides to change anything, I have no control over that.

At the time of this tut, Sept 1st, 2013, everything is working and all links are working. 

 

Supplies Needed

I used PSPX...but any of them should work.
Scrap Autumn Friends by Xena Princess Warrior HERE
 WSL_Mask 84 HERE
Template Autumn 1 by Mythical on CMC Blog HERE
Scroll down a bit
PhotoEffex Filter-Scanlines
Tramage-Tow the Line
Font I'm fasionista! 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter D to duplicate, close the original.
Delete the credits and the wordart.
Go to Image, canvas size and change that to 800 x 800, can resize later.

Paste paper #3, resize to 75% and apply your mask, delete and merge group.

Delete the template layer each time.

Merge raster 2 of the template layer down with raster 1, then select all, float, defloat and resize paper #4 to 65% and paste, invert and delete.

Select raster 3 layer of the template, select all, float, defloat, resize paper #2 to 50%, paste, invert and delete.
Do not deselect yet, mirror element 01, paste and move to the right side, delete, now select none. Change the blend mode to overlay.
On the paper layer apply PhotoEffex filter-Scanlines
with these settings
2, 2, 20, 10 50, 0

Select raster 4 of the template, select all, float, defloat, add a new raster layer, fill with #ec3e00, select none, then go to Adjust, Add/Remove Noise, add noise at 100%, with uniform and monochrome checked.

Select raster 6 on the template, resize paper #2 to 50% and paste, invert and delete, select none.
Apply Tramage filter-Tow the line.

Select raster 7, add a new raster layer, fill with #ec3e00, select none, then go to Adjust, Add/Remove Noise, add noise at 100%, with uniform and monochrome checked.

Select raster 8 of the template, go to Adjust, Hue and Saturation, colorize with these settings
Hue 12, Saturation 255

Paste element 01 on the left side and adjust, duplicate, mirror, move below the first layer and erase the bear part, all we want is the leaves showing.

Resize element #11 to 45% and place on the right side.

Resize element #12 to 15%, duplicate a few time and place where you like them, mirror one or two of them also.

Resize wordart #2 to 30% and place at the top, sharpen once.
Duplicate and place at the bottom part below your leaves layer you erased the bear from.

Resize element #19 to 50% and place on the left side behind the bear, like he is laying up against it.

Resize element #14 to 35% and place at the top part below the wordart layer.

Resize element #10 to 35% and place behind the candle, duplicate, mirror and adjust so a bit is showing on the left side.
I typed out friends and gave it a medium gradient glow and place at the top.
On element 02, I took my selection tool and drew around the squirrel and a bit of the leaves, copy and pasted it on my tag also, moving down below the bear layer, duplicate, mirror and move below the rake layer.

Add any other elements that you would like.

Resize your tag first then, close off any background you might have used,
add all copyrights to your tag and your name and merge.

Hope you enjoyed doing this tut.