Vintage Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.

Tube is called  Ombeline

You need a license to use this art work. Please do not use without a license.

 You can find this art,  it is Exclusive to her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Vintage Romance by Lil Mz's Brainstorm  HERE

RD Mask set 147_2  HERE

Check out the rest of the blog HERE

Filters

Xero-Soft Mood

Mura Meister Copies-Encircle

Font of Choice, I used Echinos Park Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

 

Open a new image 800x800, paste paper 14, apply your mask, delete, merge group.

 

Resize element 115 to 55%, apply Mura Meister Copies-Encircle, change the

first number to 16.

 

Paste element 17, free rotate to the left at 10 degrees, duplicate, mirror, move down

a bit on the right, merge down.

Click inside the frames, expand by 5, paste paper 12, adjust so just the color shows and not the trim on the left of the paper, mirror your close up, paste in the left frame, delete, select none, duplicate the close up, mirror and place in the lower right frame, medge down.

Duplicate the tube, go to Adjust, Blur, Gaussian blur, number on 4, change the blend

mode to Screen, then apply the Xero filter-Soft Mood, merge down.

 

Resize your tube to 33%, paste in the center.

 

Resize element 115 to 55%, paste on the frame layer on the left at the bottom, duplicate,

mirror.

Resize element 102 to 45%, paste on the left below the tube layer.

Resize element 81 to 35%, paste on the right of the tube at the bottom.

Resize element 46 to 30%, paste on the left by the boxes.

Resize element 50 to 30%, paste by the purse on the left.

Resize element 19 to 40%, paste under the book on the right, duplicate, mirror, move

below the tube by her shoes.

Paste element 74 on the frame layer at the bottom, duplicate, free rotate to the right at 90 degrees, place on one side, duplicate, mirror.

Resize element 71 to 50%, free rotate to the right at 90, paste on the left, duplicate, mirror,

move both up a bit.

Resize element 43 to 50%, paste below the flower layers on the right, duplicate, mirror,

move up just a bit.

Resize element 77 to 35%, paste at the upper left and erase some of the stem, duplicate, mirror.

Paste element 26 on the circle flowers at the upper right, duplicate, mirror, move to the bottom left.

Paste element 39 on the right below the tube layer, duplicate, mirror, move below the boxes layer.

Resize element 25 to 30%, paste on the right below the book.

Resize element 14 to 30%, free rotate to the left, duplicate 3 or 4 times, place at the bottom under several layers for the look you want.

 

Add any other elements you would like.

 

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

I Heart You

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Jose Cano.
Tube is called Cassi

You need a license to use this art work. Please do not use without a license.

 You can find this art at his store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Chocolate Hearts by BitsNBobs  HERE or HERE

Template Valentines 26 by Sylly Creationz HERE
Check out the rest of the blog HERE

DD Valentine Mask 5  HERE

Check out the rest of the blog HERE

Filter
Screen Works-Light Gauze
EyeCandy 4000-Gradient Glow

Font of Choice, I used Heart Romance, I had to set the size to 250

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
and delete the credits.
Go to Image, Canvas size, 800 x 800.

Paste paper 10, apply your mask, delete, merge group.

Merge  purple rectangle top down with purple rectangle bottom, leave the color as if
or if you prefer a different color.
Select the dark pink layer, paste paper 15, invert, delete.
White rectangle paste paper 10, invert, delete.
Merge pink rectangle bottom down with pink rectangle top, paste paper 13, invert, delete.
Noisy square backs, go to Adjust, Hue and Saturation, Colorize, have the numbers
on Hue 233, Saturation 255
Merge dark pink top down with dark pink bottom, paste paper 14, invert, delete.
Purple rectangle, paste paper 7, invert, delete, do not deselect yet, paste your tube on one side,
mirror your tube then paste on the other side, delete both, select none, merge down.
Duplicate, Adjust, Blur, Gaussian blur at 4, change the blend mode to Screen, apply the
filter Screen Works-Light Gauze
White square add noise at 100%.
Pink square paste paper 10, invert, delete, select all, float, defloat, Modify, Select, Selection Borders, number on 2, new raster layer, fill with #86213d, add noise at 100%.
Paste your tube below this frame, duplicate, move above, take your magic wand, click inside the frame, invert, delete the bottom tube, select none, erase the parts of the top tube, outside the frame.
Resize element 58 to 40%, paste at the bottom being on the top layer, duplicate, mirror.
Resize element 21 to 40%, paste in the center of the flowers on top layer.
Resize element 25 to 40%, paste at the top below the tube layer on the left, duplicate, mirror.
Resize element 14 to 30%, paste on the flower layer on the left, duplicate,
move over to the right, add a medium white gradient glow.
Resize element 13 to 30%, free rotate to the right at 20 degrees, move below the
flowers on the right.
Resize element 38 to 35%, free rotate to the left at 20 degrees, paste at the upper left,
duplicate, move to the lower right below the flowers.
Resize element 40 to 25%, paste below the big Chocolate heart to the left, duplicate, free rotate to the left at 20 degrees, duplicate, mirror.
Resize element 32 to 25%, paste on the heart at the upper left.
Resize element 26 to 30%, free rotate to the right at 90.
Resize element 30 to 30%, paste below the flowers on the left, duplicate, mirror.
Resize element 56 to 30%, paste on the left below the pink flowers you just pasted, duplicate,
mirror, move below the heart on the right.
Resize element 65 to 35%, paste on the right below the flower, duplicate, mirror.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Sweet Puppy Love

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called Present Lys Sweet Puppy

You need a license to use this art work. Please do not use without a license.

 You can find this art,  it is Exclusive to her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Janet by Lil Mz's Brainstorm  HERE

Be My Valentine Template by TwyztedT's Playroom HERE
Check out the rest of the blog HERE

DD NVM Mask_4  HERE

Check out the rest of the blog HERE

Filters
xero-Soft Vignette
Mura Meister Copies-Encircle

Font of Choice, I used Echinos Park Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift and hit the letter d to duplicate, closed the original,
delete the credits.
Go to Image,  Canvas size  800 x 800.
Paste paper 13 on the bottom layer, apply your mask, delete, merge group.

Resize your tube to 40%, paste in the center on the top layer.

Resize element 46 to 35%, apply Mura Meister Copies-Encircle, change
the first number to 14, move to just above the mask layer.

Select raster 5 of the template, resize paper 13 to 75%, paste, invert, delete.
Raster 11 add noise at 100%.
Paste element 93 on raster 11 and move up a bit.
Raster 6, paste paper 8, invert, delete.
Go to Effect, 3D Effects, Inner Bevel
Apply this bevel setting Bevel Shape 2, Width 2
18, 2, 9, 10
315, 50, 30
color White
Raster 8, paste paper 13, invert, delete.
Raster 10, add noise at 100%.
Raster 2, paste paper 2, invert, delete.
Raster 9, add noise at 100%.
Raster 3, paste paper 6, invert, delete add the bevel with the same settings as before.
Resize element 96 to 34%, free rotate to the left at 30 degrees, paste above the heart on one side,
duplicate, mirror.
Resize element 2 to 35%, paste below the frame layer, erase any part showing outside, duplicate, mirror adjust.
Raster 7, paste paper 4, apply the same bevel.
Raster 13, paste paper 10, same bevel settings.

Paste element 25 above the mask layer at the top, duplicate, mirror, duplicate, flip, duplicate, mirror, adjust them all.
Paste element 48 below the wordart layer at the top.
Resize element 49 to 50%, paste on the right below the tube layer.
Resize element 95 to 50%, paste on the right above the tube layer.
Resize element 113 to 25%, paste on the right below the tube layer.
Resize element 69 to 35%, paste on the left by the heart of the tube.
Resize element 100 to 45%, paste below the calendar, duplicate, mirror, move below the tube layer and adjust the little bag up more, duplicate again move more to the center so a
little bit shows under the tube.
Paste element 15 on one side on the small heart, erase any part over it, duplicate, mirror.
Resize element 73 to 35%, free rotate to the left at 30, paste below the tube
layer on the left.
On the wordart add a bevel or glass effect to the word Valentine.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Sweet Valentine

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova_Maria.
Tube is called Allegra

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Sweet Valentine by BitsNBobs  HERE or HERE

Template Valentines 25 by Sylly Creationz HERE
Check out the rest of the blog HERE

DD Valentine Mask 1  HERE

Check out the rest of the blog HERE

Filter
Xero-Fritillary
EyeCandy 4000-Gradient Glow

Font of Choice, I used Marchy Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
and delete the credits.
Go to Image, Canvas size, 800 x 800.

Paste paper 6, apply your mask, delete, merge group.

Merge  purple rectangle right down with purple rectangle left, select, float, defloat, paste
paper 3, invert, delete, select none, delete the template layer also.
Delete each layer as you go along.

Merge pink rectangle top right down with pink rectangle bottom left, select,
paste paper 1, invert, delete.
Merge dark pink rectangle right down with dark pink rectangle left, select, paste
paper 8, invert, delete.
White square add noise at 50%.
Purple square, paste paper 9, invert, delete.
Select the dotted square, new raster layer and fill with a color from your tube.
Merge small rectangle right down with small rectangle left, add a new
layer, fill with a color from your tube, I used #c42261.
Merge pink rectangle right down with pink rectangle left, apply the
Xero filter-Fritillary with these settings
5, 30, 100, 20
Apply a fat white gradient glow using EyeCandy 4000, width at  3,
25, 100
White square backs, add noise at 50%.
Merge dark pin square right down with dark pink square left, paste paper 7, do not deselect yet, resize your tube to 35%, paste in the square, mirror your tube before pasting into
the other square, adjust, delete, select none, merge your tubes together.
Duplicate, Adjust, Blur, Gaussian blur at 4, change the blend mode to Screen, merge down.

Resize your tube to 33%, paste in the center, being on the top layer.

The wordart I left white, but if you prefer a color, change to a color you like.

Element 26, 50%, place at the upper right below the tube layer.
Element 73 to 45%, place on the left at the bottom above the tube layer.
Element 72 to 45%, paste on the small frame on the lower right, duplicate, mirror, move
to the upper left small frame, erase some of the stem if you prefer.
Element 46 resize to 40%, place at the top of the champagne glasses being on the top layer.
Element 9 and 10 to 25%, paste on the left below the candle layer, duplicate both, move to
the right and below the flower layer on the small frame.
Element 78 to 40%, place on the right at the bottom below the flower layer.
Element 34 to 72%, paste at the top on the mask layer, duplicate, flip.
Resize element 77 to 25%, paste on the heart ribbon at the upper right.

Element 85, apply Mura Meister Copies-Encircle, move to just above the mask layer,
at the upper left, duplicate, mirror, flip, adjust.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Glam Love PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called Glam-Valentine

You need a license to use this art work. Please do not use without a license.

 You can find this art,  it is Exclusive to her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Love by Lil Mz's Brainstorm  HERE

Template 24-Be Mine by Sylly Creationz HERE
Check out the rest of the blog HERE

DD NVM Mask_2  HERE

Check out the rest of the blog HERE

Filters
xero-Soft Vignette
EyeCandy 4000-Chrome

Font of Choice, I used Spring Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift and hit the letter d to duplicate, closed the original,
delete the credits.
Go to Image, resize all checked and resize to 90%, then Canvas 800 x 800.
I do this so the template is a bit smaller so the mask will show better.
Paste paper 20 on the bottom layer, apply your mask, delete, merge group.

Move the wordart Be Mine Valentine down and over to the right more, select, expand by 2
add a new layer, move below and fill with black, back on the wordart, merge down.

Will start working from the purple center down first.

Click on the purple circle, paste paper 29, invert, delete, paste your close up tube,
move to the right some, delete, select none, duplicate, go to
Adjust, Blur, Gaussian blur at 4, change the blend mode to Hard light, then
apply the xero filter-Soft Vignette with these settings
Elliptical, Foreground color
Diagonal dots
3, 2, 0, 255
merge down.
Select the pink circle, apply EyeCandy 4000-Chrome with these settings
Reflection Map-Outdoor tif
Bevel width 10.80
Bevel Height 50,
Smoothness 50
Thickness 0
Ripple width 72.00
Inside marquee checked
Then go to Adjust, Hue and Saturation, Colorize with both numbers on 255
or change it to a color you prefer.
White circle layer, add noise at 50%.
Dark pink circle, paste paper 8, invert, delete, select none.
Go to Effect, 3D Effects, Inner Bevel
Apply this bevel setting
Bevel Shape 2, Width 2
18, 2, 9, 10
315, 50, 30
color White
Large purple circle, paste paper 3, invert, delete, apply bevel.
Merge down Pink rectangle right  with the Pink rectangle left, select, paste paper 8,
invert, delete, apply bevel.
Merge White rectangle right down with White rectangle left, select, paste paper 2,
invert, delete, apply bevel.
Dark pink rectangle, paste paper 3, invert, delete, apply bevel.
Merge the pink square back with the pink rectangle back, paste love paper, invert,
delete, apply the bevel.

Now working with the layers above your close up tube layer.

Merge the white square right down with the white square left, add noise at 50%.
Merge pink square right down with pink square left, apply paper 3, invert,
delete, apply the same bevel.
Merge purple square right with the purple square left, paste paper 11 above the little hearts layer, invert, delete, resize your tube to 40%, duplicate the tube, mirror,
place the face of each tube on the square where you like, select the square, invert, delete each tube, select none. Making sure the tube is below the small wordart layer.
Change the blend mode to screen on these tubes. Apply xero filter-Soft Vignette with the same
settings as before.

Resize your tube to 40%, mirror, place on the left side.

Resize element 38 to 60%, paste at the top above the small tube square, duplicate, mirror,
move to the lower left square.
Resize element 25 to 60%, place on the small square on the right, erase some of the pin at the top of it.
Resize element 31 to 80%, paste on the large circle.
Paste element 22 at the bottom over the tube and erase some of the straight edge of the legs.
Paste element 11 below the paper layer of the large circle.
Paste element 61 above the mask layer on one side flip, duplicate, mirror, adjust to
your liking.
Resize element 10 to 25%, being on the top layer, paste on one side, duplicate, mirror.
Paste element 73 on the right below the tube layer, adjust to your liking.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Cupcake Cutie

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Anna Marine.

You need a license to use this art work. Please do not use without a license.

The tube I am using is 47-3.

 You can find this art at the CDO store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Cherry Cuppie by Irish Princess Designs  HERE

You can also find this kit at one of these stores  here, here, here

Allison's Addictions Template_5 HERE

Check out the rest of the blog HERE 

 DD VMask_7  HERE

Check out the rest of the blog HERE

Filters

Screen Works-Light Gauze

Font of Choice, I used Blacksword

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original,

delete the credits.

Paste paper 11, apply your mask, delete, merge group, resize mask to 95%.

Paste frame 2 on the top layer, take your pick tool and pull in the sides of the frame to fit the pink circle better.

Click inside with your magic wand, expand by 5, paste paper 12, invert, delete, move below the frame, paste your close up tube, delete, select none.

Duplicate your tube, go to Adjust, Blur, Gaussina blur number on 4, change the blend mode to screen, then apply the Screen Works filter-Light Gauze, merge down.

Mirror your other tube, paste on top of the frame on the left.

Select the bottom middle circle, float, defloat, paste paper 3, invert, delete, also delete the template layers as you go along.

Do the same with the upper middle circle with the same paper.

You can leave the dash circles as is or add noise if you like.

The upper left, rect, right upper rect, lower left and right, paste the same paper in each,

or if you like you could use a different one on each, I used paper 11.

The left upper and right lower circle rect paste paper 2, invert, delete, select none on both.

Resize cupcakes to 30%, place both in the center how you like.

Resize the bling to 70%, paste on the mask layer at the upper right, duplicate, mirror, flip.

Resize the candy to 35%, place on the right below the cupcakes, duplicate, move one out more.

Resize the cherries to 35%, paste at the bottom of the tube legs to cover the straight edge.

Resize the stars to 40%, paste on the right below the candy.

Paste the sparkles on the top layer, erase any part on the face you don't like.

Paste the scatter at the lower left on the mask layer, duplicate, flip, duplicate, mirror, duplicate, flip.

Resize the cake pops to 50%, place on the right below the stars layer, duplicate, mirror,

move below the tube layer and down a bit.

Resize the lipstick to 40%, place on the right above the candy.

Resize the cocktail to 45%, place in front of the cherries on the left.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Forever Love PTU

 

 

This tut was written for those with a basic knowledge of psp.

I am using an Awesome Scrap kit by Scrapz n Pleasure

You can find her kits at Mystical Scraps  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Valentina, you can purchase HERE
You can check out her blog HERE
RR Set Mask_2-1  HERE
EyeCandy 4000 Gardient Glow

Xero Filter-Mistifier

Font of Choice, I used Shipped Goods 1

Drop shadow is usually V-2 H-2 Black, 50, 7

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 6, apply your mask, delete and merge group.

Paste element 08 resize to 95%, duplicate, mirror, adjust, then merge down and resize again to 95%.

Paste your tube and resize.
If using the same tube I am, I resized mine to 35%.

Paste element 47, resize to 20% and place on the right side of your tube.

Resize element 24 to 55%, place under your tube layer, duplicate, mirror.

Resize the wordart forever to 60%, paste above the flower layers, then move the flowers how you like them.

Resize element 39 to 40%, place on the right side below the wordart.

Paste element 31, resize to 30%, paste on the left side above the wordart.

Resize element 10 to 85%, place on the mask layer, duplicate, mirror, adjust so they are showing behind your tube.

Resize element 30 to 20%, place above the cup layer and over the cup to look like it is bubbles coming from the cup. Drop shadow with white first
H2 V2 then H-2 V-2 color white.
Then change it to black and repeat.
Then sharpen twice.

Paste element 49 below the flower layers on the left, duplicate, mirror.

Resize element 25 to 25% and paste on the curtain layer where you like, duplicate, mirror and place up a bit higher.

Resize element 09 to 45%, place on the right side below the flower layers.

Resize element 40 to 45%, free rotate to the right at 90, place at the top on the curtain on one side, duplicate and mirror.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

All My Heart PTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Tony Tzanoukakis.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the his  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap All My Heart by Amy Marie
and you can purchase it at her Store  HERE

RR Set Mask_2-1  HERE

Xero Filter-Mistifier and Soft Vignette

Font of Choice, I used One Starry Night

(Drop shadow for this tag was V-2 H-3 Black, 30, 7)

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 21, apply your mask, delete and merge group.

Select your mask, float, defloat, paste your tube, invert, delete, select none.
Change the blend mode to Screen, apply the Xero Filter-Mistifier,  change the haziness to 145, then apply
Soft Vignette, change the pattern type to Diagonal dots and repeats 1.
then merge down with your mask.

Paste your tube and resize to 45% and place more to the right.

Paste element 41 on the left side, overlapping your tube.
Paste element 32 below your tube layer and move over to the left some.

Paste element 53, mirror, resize to 75%, having it below your tube layer.
Paste element 45 under your tube layer and move toward the right a bit.

Resize element 49 to 70%, place on the left side below the wordart, duplicate, move down and over to the right behind your tube.

Paste element 36 below the heart layer on the left at the top.

Resize element 42 to 75%, place behind your tube and up some, duplicate, mirror, move below the wordart layer and place by the heart, duplicate again and move down more.

Resize element 30 to 20%, free rotate to the right at 30, place at the top, duplicate mirror and move back over to the left.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

I Love You 2 PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Tony Tzanoukakis.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the his  Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Antoinne by Amy Marie
and you can purchase it at her Store  HERE

RR Set Mask_2-1  HERE

Xero Filter-Soft Mood

Font of Choice, I used Fiolex Girls

Drop shadow is usually V-2 H-2 Black, 50, 7

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 16, apply your mask, delete and merge group.

Paste frame 42, resize to 85%,  duplicate, change the blend mode to hard light, merge down.
Click inside with your magic wand, expand by 5, paste paper of choice, I used paper 19, invert, delete, select none.

Resize element 29 to 50%, place on the place layer and change the blend mode to Luminance (L) and move to the right a bit.

Paste element 16 on the frame at the bottom.

Paste your tube on top of the frame layer, resize to 85% and place how you prefer.

Paste your original tube below the heart layer, adjust how you like, lower the opacity to 30, then apply the Xero Filter-Soft Mood

Paste element 60 on the left side of the tube on top, resize it to 55%, mirror and move back by the shoes.
Paste element 27 below the sparkle layer.
Resize element 9 to 50%, place off to the right of the candy box.

Paste element 50 on your mask layer on the right, duplicate, mirror, flip and adjust both to your liking.
Paste element 39 on the mask layer in the upper left side, duplicate, flip and move over to the right side bottom.

Resize element 26 to 80%, place on the right side just above the frame layer, duplicate and mirror and move this one up just a bit more.

Place sparkle element 72 on the heart in the frame, place how you like and then erase the part outside the heart area.
Resize element 52 to 40%, place on the right side below the sparkle layer.
Paste element 62 below the paper layer of the frame and move up and how you like, then erase any part you don't want, duplicate a couple of times, flip, position, erase some, duplicate again, flip and adjust.

Then I pasted element 66, free rotate to the right at 90, placed above the heart trellis on the right and adjusted how I liked, erased some, duplicate, mirror, adjusted and erase a little more.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

I LOVE You PTU

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Jennifer Janesko.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the CDO Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Kit IB Jennifer Janesko 24-3 at CDO
By Honored Scraps and you can get it  HERE

Biene Template 3 on Creative Misfits Creations HERE 
RR Set Mask_2-1  HERE

EyeCandy4000-Gradient Glow

Font of Choice,  I used Before the Rain

Drop Shadow usually V2 H2 50 black

 

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the d to duplicate and close the original, then go to
Image, canvas size and make it 800 x 800, can resize later.
Delete the credits and wordart.

Delete the close off layer toward the bottom and then merge the bottom sm rectangle bottom with the sm rectangle top.
Select, float, defloat, paste paper 3, invert, delete, select none.
Delete your template layers as you go along also.

Merge the diamond layers together.
Merge the Rec right circle down with the left one, select all, float, defloat, paste paper  6, invert and delete. Do not deselect yet, go up to Selections, Modify,
Select selection borders and change the number to 3, add a new raster layer,  fill with #7d5f2b or a color of your choice, select none now.

Select the black rectangle, paste paper 5, invert, then do the border like before,
only paste paper 6,  invert, delete, select none.
Apply a fat gradient glow with these colors
Width at 3, Soft Corners at 25 and Opacity at 100
first color on white the second color on #7d5f2b

Merge the sm red right circle down with the left one, select, float, defloat, paste paper 3, invert, delete, select none.

Paste element 11, free rotate to the left at 45%, place at the bottom and just above the white background layer, duplicate, flip, mirror.

Being on heart #6 on the template layer, merge down each heart until they are all on one layer, apply an inner bevel with these settings
Bevel shape 2
Width 4
8, 3, 4, 0
48, 36, 42
color white
Add noise at 25%

Paste element 12, free rotate to the left at 90 and paste in the center.

Paste your tube and place touching the dotted line.
Paste element 4 behind your tube layer.

Paste element 20 below the sm red circles and erase any part showing on the edges.
Resize element 16 to 50%, place on the right side to hide the edge of the tube, duplicate the glass and move down a bit.
Paste the wordart, resize to 50%, place by the glasses and add a white fat gradient.

Paste element 13 in the upper left circle.

Take element 8, place in different places and erase all you do not want showing.

Paste element 7, resize to 40%, apply Mura Meister Copies-Encircle,  change the first number to 14, move to the upper left circle just above the white background layer.
Take your Pick tool and pull in a little until you like the way it looks, duplicate, move down to the lower right circle.
Resize element 14 to 40%, mirror and place between the glasses.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.