Good Luck To You

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Stan Dubin.
Tube is called Adriana

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Royally Irish by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, ready for all your St Patrick tagging fun.

DD SPD Mask 2  HERE

Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 25, apply your mask, delete, merge group.

Paste element 20, resize to 95%,  then  resize element 38 and paste on top of that, click inside
with your magic wand, expand by 5, paste paper 26, invert, delete, move below the frames.

Resize your tube to 40%, paste on the top frame.

Resize element 96 to 40%, paste on the left by the hand of the tube.
Paste element 16 below the tube layer at the bottom.
Paste element 25 between the 2 frame layers.

Resize element 24 to 30%, paste below the shoe on the left, duplicate twice more, move
one to the left under the hand and the other to the right under the shoes of the tube.

Paste the Lucky Collab CU element 18 at the bottom, below the tube, duplicate, mirror.
Paste element 05 on the right on the frame layer.

Resize the horseshoe to 35%, paste on the leg of your tube, erasing some to look like
it is going under one leg.
Resize flowers to 50%, paste on the left on the frame layer, duplicate, mirror,
move above the armor knight.
Resize element 27 to 45%, paste below the knight on the right, duplicate, mirror.
Resize element 16 to 50%, paste on the top layer on the left more.
Paste the harp above the knight layer on the left.
Resize the tiara to 30%, paste at the bottom where you like.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Spring Time

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.
Tube is called Digby

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Watercolor Garden by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is beautiful, lots of different ways to tag with this one, Spring, Easter and more.

Mask19 by Angie Tagged Me  HERE

Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle

Font I used Good Dog

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 5, apply your mask, delete, merge group.

Paste element 61, resize to 80%, click inside with your magic wand, expand by 2, paste
paper 5, invert, delete.

Resize element 56 to 85%, paste, duplicate, being on the bottom one, move over a bit and down, erasing the fence  except for the last post, duplicate, mirror.

Resize element 10 to 40%, paste on one side below the top fence, duplicate, mirror, duplicate
again, move below the tube layer on the right.

Resize your tube to 28%, paste above the fence layers on the grass.
Resize element 30 to 40%, paste below the tube by the tail, free rotate to the left
at 15 degrees.
Resize element 27 to 25%, paste on the left below the tube layer.
Resize element 39 to 40%, paste on the right below the flower layer behind the tube.

Resize element 62 to 25%, paste on the right in front of the wooden stool.
Resize element 14 to 55%, mirror, paste on the right below the stool layer.
Resize element 66 to 65%, free rotate to the right at 30 degrees, paste on the frame on the right,
duplicate, mirror.
Resize element 67 to 20%, paste below the lantern on the right.
Resize element 59 to 70%, paste on the left just above the frame layer.
Resize element 40 to 15%, paste on the bench, then back to the original bird, resize to 10%,
paste on the spring sign.
Resize element 28 to 15%, paste below the pots on the left, duplicate, move more to the left and down some.
Resize element 49 to 30%, mirror, paste on the left below the rocks.

Resize element 29 to 45%, mirror, move more to the center of your tag, then apply Mura Meister Copies-Encircle changing the first number to 25, then move to just above the mask layer.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Into The Night

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Trinita.
Tube is called Morgana

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Robin Moth by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
Part Fantasy, Part Goth, Black, Grey and Red make up this gorgeous versatile kit.
Millie's PSP Template 804 HERE
Check out the rest of the blog HERE

Mask0186 by Sophisticat Simone  HERE

Check out the rest of the blog HERE

Filters
Xero-Soft Mood and Clarity
Font of Choice, I used Pamega Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
delete the credits and wordart, then Canvas size 800 x 800.

Paste paper 11 on the bottom layer, apply your mask, delete, merge group, mirror mask.

Merge layer 2 of the template down with layer 1, select all, float, defloat, paste paper 8,
invert, delete, delete the template layers as you go along also.

Merge layer 4 down with 3, select, paste paper 1, invert, delete.
Merge layer 6 down with 5, paste paper 2, invert, delete.
Merge layer 8 down with 7, paste paper 6, invert, delete.
Layer 9 paste paper 20, invert, delete, paste your close up tube, delete, select none.
Apply the Xero filter, Soft Mood first, then Clarity
Resize element 51 to 47%, free rotate to the left at 90 degrees, paste over the tube layer.

Resize your tube to 45%, mirror, paste on the right.

Resize element 1 to 65%, paste above the mask layer, duplicate twice, move one to the
right and one to the left and a bit lower than the center one.
Resize element 17 to 50%, paste below the tube layer on the left, duplicate, mirror, adjust.
Resize element 21 to 50%, paste below the roses on the right.
Resize element 34 to 90%, paste below the roses and up a bit, duplicate, move down at the bottom.
Resize element 39 to 50%, paste below the tube more to the left, erase and stem showing at the bottom.

Resize element 79 to 35%, paste on the right above the pot of roses, duplicate, mirror.
Resize element 15 to 50%, mirror, paste on the right below the grass layer.
Resize element 19 to 20%, paste on the right above the tube layer.
Resize element 14 to 10%, paste on the red jar.
Resize element 77 to 55%, paste on the left on the frame layer and move down some.
Resize element 44 to 60%, paste at the top below the tube layer, duplicate, mirror.
Resize element 67 to 20%, paste on the right below the jar.
Resize element 38 to 55%, paste on the left above the frame layer.
Paste element 62 at the top on the castle layers, duplicate, move below the tube in the frame
and down some.

Resize element 16 to 35%, paste below the roses layer.
Resize element 16 to 35%, paste on the left being on the top layer at the bottom.
Resize element 63 to 90%, paste below the tube layer on the roses at the bottom.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Bad Attitude Cat

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.
Tube is called Felix

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Urban Jungle by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, so many ways to tag with.
Forum Set Templates 16 Bad-itude by Sylly Creationz HERE
Check out the rest of the blog HERE

Vix Big Mask 018  HERE

Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle
EyeCandy 4000-Chrome


Font of Choice

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
and delete the credits.
Go to image, resize all checked, resize to 85%, then Canvas size 800 x 800.
 Delete credits and this girl has wordart and drop shadow.
Move the wordart Bad-itude and it's white layer down to work with later.

Paste paper 6 on the bottom layer, apply your mask, delete, merge group.

Resize element 54 to 45%, apply Mura Meister Copies-Encircle, change the first number to 35
Paste element 32, flip resize to 70%, apply Mura Meister Copies-Encircle, change the first number to 20.
Resize these again later after you have finished adding all the other elements.

Select the light orange rectangle,  resize paper 10 to 75%, paste, invert, delete.
Select the large green rectangle, resize paper 3 to 75%, paste, invert, delete.
Dark orange back rectangle, paste paper 3, invert, delete.
Dark purple rectangle, paste paper 2, invert, delete.
Light orange rectangle, paste paper 3, invert, delete.
Light purple circle, paste paper 4, invert, delete.

Select the gray circle, apply EyeCandy 4000-Chrome with these settingsReflection Map-Outdoor tif
Bevel width 10.80
Bevel Height 50,
Smoothness 50
Thickness 0
Ripple width 72.00
Inside marquee checked
Then go to Adjust, Hue and Saturation, Colorize with these
numbers Hue 25, Saturation 134
or change it to a color you prefer.
On the Fritillary circle, use the same colorization as before.

Select the dark orange rectangle, paste paper 4, invert, delete.
Purple circle, paste paper 2, invert, delete, resize your tube to 75%, paste how you
prefer, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode
to hard light.
Select the small green rectangle, resize paper 3 to 75%, paste, invert, delete.
3 circle noises change the color like before using Hue and Saturation.
Select the 3 circles, paste paper 5, invert, delete.
Delete the dots.

Resize your tube to 30%, place on the right side.

Resize element 18 to 85%, paste on one side below the light orange rectangle layer, duplicate, mirror.
Move the wordart Bad Attitude onto the wall edge on both sides, recolor a color of choice.
Resize element 1 to 75%, paste below your tube on the left.
Paste element 58 below the wall on one side, duplicate, mirror.
Resize element 14 to 35%, paste on the left.
Resize element 28 to 45%, paste on the right below the tube, duplicate, mirror.
Paste element 15 at the top above the feather circles on one side, duplicate, mirror,
move down just a bit.
Paste element 25 on the Fritillary circle layer, move to one side more, duplicate, mirror.
Resize element 37 to 40%, paste on the right below the tube layer.
Resize element 32 to 35%, paste at the bottom by the collar, duplicate a couple of times and
move where you like.

Select the wordart Bad-itude, paste paper 2, invert, delete, merge down with the white layer,
move up on the left where you like.
Resize element 34 to 20%, paste on the left below the bottle.

Resize element 12 to 25%, paste on the barrel.
Resize element 81 to 10%, paste on the barrel next to the one with the bullet holes, duplicate,
move down on the lower barrel below your tube.

Resize element 76 to 25%, paste by the collar on the right and below that layer.
Resize element 71 to 25%, paste below the barrel layer on the left.
Resize element 70 to 10%, paste at the bottom by the chain, duplicate, move over some.
Resize element 47 to 15%, place by the bottle on the left.


Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Friends-Sunshine of Life

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.
Tube is called Bear (Teddy Bear)

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Beary Sweet by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, with Yellows, Blues and Whites make up this cute kit.  
Honey bees, a cute bear and plenty of flowers
Template Friendship 2 by Sylly Creationz HERE
Check out the rest of the blog HERE

RD Mask Set 136_#2  HERE

Check out the rest of the blog HERE

Filters
xero-Fritillary

Font of Choice, I used Spring Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
and delete the credits.
First I went to image, resize all checked to 85%, then Canvas size 800 x 800.

Paste paper 10, apply your mask, delete merge group.

Resize your tube to 30%, mirror, place on the left side below the larger wordart and sun.
Then move the wordart over to the right more and the sun up to the upper right.

Working from the bottom on the template, select the green rectangle, paste paper 1 with the daisies showing at the bottom, invert, delete, select none.

Select the pink rectangle, paste paper 5, adjust, invert, delete, select none.
Merge the top yellow square down with the bottom right square, apply the
xero filter-Fritillary with these settings
5, 30, 100, 16
Merge the left pink square down with the pink circle, select, paste paper 6, adjust, invert, delete.
Select the blue square, paste paper 16.
Add noise at 25% on the white square.
Select the green square, paste paper 18, invert, delete.
Add a drop shadow of choice for the pixel wordart.
Blue, White and Green circles leave as is.
White diagonal square, add noise at 25%.
Pink diagonal square, paste paper 2, invert, delete.
Yellow strips add the same fritillary settings as before.

On the wordart Friends, go to Effects, 3D, inner bevel with these settings
Bevel Shape 2, width 2
18, 2, 9, 10
315, 50, 30
color white
Resize element 25 to 75%, paste on one side, duplicate, mirror, adjust, duplicate twice more,
move to just above the mask layer on each side.

Resize element 20 to 50%, paste on the right below the bear layer, erase the top boxes.
Resize element 105 to 50%, place on the left below the bear, duplicate, mirror, move below the
boxes, erase some of the stem showing below.
Resize element 3 to 25%, mirror, paste below the tube on the left.
Resize element 47 to 75%, paste on the left below pink circle layer, duplicate, mirror, move down some.
Resize element 53 to 50%, paste on the right below the daisy flowers.
Resize element 78 to 50%, paste on the right, adjust, duplicate, move more to the left.

Resize element 90 to 40%, paste by the boxes on the right at the bottom, duplicate, resize to 90%, move to the left more.
Resize element 70 to 15%, paste at the bottom by the branches.
Paste element 65 below the tube layer at the bottom.
Resize element 92 to 20%, paste on the right below the boxes.
Resize element 4 to 15%, paste on one side where you like, duplicate, mirror.

Resize element 55 to 35%, paste below the box layers and adjust behind the tube how you like,
duplicate, mirror, adjust on the left, duplicate, mirror, move below the daisy on the right.
Resize element 103 and 104 to 15%, place at the top how you like.
Resize element 64 to 95%, paste at the bottom below the twig layers.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Butterfly Fairy

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Zebrush.
This is an Exclusive tube called psp_fairy

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit called Blue Morpho by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is so Gorgeous, with different shades of blues, purples and more.

 RD Mask Set 136_4  HERE

Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 1, apply your mask, delete, merge group.
Paste element 50 on the mask layer.
Paste element 47 at the top of the columns.
Resize element 49 to 90%, paste lower on the columns.

Paste your tube about center, resize to 60%.

Paste element 14 at the bottom, above the tube layer, resize to 85%, erase some of the straight edge.
Resize element 52 to 50%, paste below the tube layer on the left.

Resize element 42 to 60%, mirror, paste below the grassy layer on the right, duplicate, mirror.

Resize element 59 to 75%, paste below the column layer on the left, duplicate, mirror.
Resize element 82 to 30%, paste at the upper right below the cloud layers.
Resize elment 8 to 30%, paste below the little cottage house on the right, duplicate, mirror, move below the swan boat.

Resize element 58 to 40%, paste on the right below the grassy layer to cover the bottom of the cottage house, duplicate, mirror, duplicate one, resize to 70%, move above the grassy layer where you like, duplicate again and move over some.

Resize element 26 to 25%, paste at the bottom being on the top layer.
Resize element 30 to 35%, paste below the swan on the left, duplicate, mirror.
Resize element 22 to 15%, paste by the lantern at the bottom.

Resize element 85 to 45%, paste below the column to the left of the tube a bit, duplicate, move above the columns and to the left, duplicate, mirror, adjust.

Paste element 33 on the top layer and move down, erase some of the larger sparkles on the tube, then duplicate and move below the tube and up.

Resize element 53 to 25%, paste at the upper left, below the sparkle layer, duplicate, mirror, move up to  the top layer sparkle at the lower right.

Resize element 76 to 50%, paste at the bottom on the grassy layer on one side, duplicate, mirror.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Dreamy Valentine

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Nocturne.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Victorian Valentine by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is Gorgeous

 DD DVM_4 Mask  HERE

Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 20, apply your mask, delete, merge group.
Resize element 79 to 80%, place on the left side.

Resize your tube to 50%, place on the frame on the left.

Resize element 92 to 90%, paste below the tube layer on the right.

Resize element 88 to 80%, mirror, place on the right side below the frame layer.
Resize element 60 to 50%, place on the right above your last layer the rose.

Element 78 to 40%, place on the shoe of your tube.
Element 31 to 50%, paste more toward the left above your tube.

Element 89 to 35%, paste below the book layer, duplicate, move to the left more.
Element 57 to 30%, paste in front of the book on the left.

Resize element 91 to 35%, duplicate, free rotate to the left at 15 degrees.
Resize element 30 to 22%, free rotate to the left at 20 degrees, place on the book.

Resize element 14 to 25%, place on the right above the book layer, duplicate, move to the left below your tube layer.
Resize element 22 to 40%, place below the book layer on the dream tag on the left.

Paste element 75 at the bottom just above the frame layer, duplicate move at the top below the frame and erase the parts showing on the right side, duplicate, again, move below that layer and down some, still being below the frame layer.

Resize element 63 to 35%, place on the right being on the top layer now.
Resize element 42 to 40%, place on the right above the clock layer, duplicate, mirror, adjust behind your tube.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Mardi Gras Bourbon Queen

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Katherine.

You need a license to use this art work. Please do not use without a license.

The tube is Exclusive to PFD.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Bourbon Queen by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

 Squirrely's Treehouse Mask #69  HERE

Check out the rest of the blog HERE

Font of Choice, I used Mardi Gras

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 4, apply your mask, delete, merge group.
Paste element 55 and move to the bottom, duplicate twice, move to your liking.

Resize your tube to 30% if using the same one and paste in the center.

Paste element 97, resize to 85%, free rotate to the left at 10 degrees, move below the tube, duplicate, mirror, merge down.
Click inside with your magic wand, expand by 5, paste paper 2, invert, delete, move below the frame, then paste element 15, delete, select none.
Then paste element 15 below the paper layer of the frame, duplicate, mirror, adjust both then merge down, duplicate, move down touching the brick path.
.
Paste element 41 below the city scape at the bottom of the frames.
Resize element 39 to 85%, paste on the left below the tube layer.
Resize element 38 to 30%, paste on the right side of the tube at the bottom.
Resize element 37 to 60%, paste on the right below the bottle.
Resize element 2 to 25%, duplicate as many times as you like and place around on the brick path.
Resize element 36 to 25%, place where you like.
Resize element 28 to 25%, mirror, place at the upper right.
Resize the wordart Mardi Gras to 65%, paste at the top above the tube layer.
Resize element 68 to 50%, place below the tube layer on the brick path on the left, duplicate, resize to 75%, move to the right below the coins and hat.
Paste element 18 on the right on the frame layer.

Resize element 65 to 75%, paste on the mask layer on the upper left, add noise at 40%, duplicate, mirror.
Resize element 71 to 30%, paste on the left at the bottom of the sign, move below the coin layer.
Resize element 63 to 35%, paste on the left by the mask.
Resize element 43 to 20%, paste at the bottom by the foot of the tube.
Resize element 27 to 25%, paste by the coins on the left.
Resize element 79 to 50%, paste on the left on the cityscape in the frame at the top, duplicate, mirror, adjust, erase any part showing outside the frame.
Resize element 48 to 50%, free rotate to the right at 90,  paste on the right at the bottom below the feather stand (element 37).
Resize element 91 to 20%, paste on the feather stand how you like.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Expresso Yourself

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Fiodorova Maria.

You need a license to use this art work. Please do not use without a license.

The tube I am using is called Maggie.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Plum Passion by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

 Moonbeams & Spiderwebs #23  HERE

Check out the rest of the blog HERE

Font of Choice, I used Close To You

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 18, apply your mask, delete, merge group, resize larger to 115%.

Resize your tube to 30%, place more on the right.

Resize element 82 to 45%, place behind the tube on the right.
Resize element 79 to 30%, place above the tube layer on the right.
Resize element 78 to 75%, place on the right below the book layer.
Resize element 51 to 75%, mirror, place below the lamp layer on the left.
Duplicate the books, move to the left below the chair and erase a bit of the back leg.

Resize element 8 to 40%, then select, select all, float, defloat, expand by 2, new raster layer, fill with white, select none, move the white below, being on the top wordart, merge down.
Paste at the top left below the tube layer.

Resize element 27 to 25%, place in front of the tube.
Resize element 12 to 25%, paste on the left below the chair, duplicate move over toward the center more.
Resize element 70 to 25%, paste at the upper right below the lamp.
Resize element 93 to 15%, place by the coffee pot.
Resize element 21 to 20%, free rotate to the right at 90, place by the coffee pot.

Resize element 96 to 25%, place on the chair below the tube.
Resize element 90 to 30%, paste below the books on the right.
Resize element 76 to 25%, mirror, place below the tube on the left by the foot.
Resize element 28 to 25%, place by the books on the right being above the tube layer.
Resize element 75 to 25% place below the coffee pot layer.
Resize element 86 to 15%, place on the right below the coffee bag, duplicate, move up on the books below the tube on the right.

Resize element 73 to 20%, place on the basket, erase the parts you don't want.
Resize element 71 to 20%, paste on the basket over the leaves how you like.
Resize 98 to 20%, paste below the basket on the left.
Resize element 36 to 40%, place by the foot on the left.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Plum Passion Love

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alec Rud.

You need a license to use this art work. Please do not use without a license.

The tube I am using is called Sweet Pink.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Plum Passion by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

 Vix Big Mask_18  HERE

Check out the rest of the blog HERE

Filter
Xero-Artworx and Fritillary

Font of Choice, I used Blacksword

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 1, apply your mask, delete, merge group, resize larger to 130%.
Paste paper 10 apply the same mask, delete, merge group, resize larger to 120%, merge down.

Paste frame element 63, click inside with your magic wand, expand by 5, paste paper 10, invert, delete, mirror your tube, paste, delete, select none, move both below the frame.
Duplicate your close up, go to Adjust Gaussian blur, blur at 4, change the blend mode to Screen, apply the xero filter-Artworx, merge down.
On the paper layer below the frame apply xero filter-Fritillary with these settings
5, 30, 85, 33

Resize your tube to 35%, paste on the left above the frame.

Paste element 21 below the tube layer on the left.

Resize element 14 to 50%, paste below the tube by the chair.

Resize element 93 to 35%, paste by the luggage.
Resize element 65 to 25%, paste on the left by the shoe of the tube.
Resize element 90 to 30%, paste on the left below the polish.

Resize element 88 to 40%, paste just above the chair layer on the left, duplicate, mirror.
Paste element 89 below the paper layer of the frame on one side, duplicate, mirror.

Resize element 53 and 54 to 40%, place at the bottom in front of the luggage.
Resize element 7 to 20%, place below the phone on the right.
Resize element 87 to 30%, paste below the phone.

Resize element 56 to 35%, paste on the right above the flower layer and move up a bit.
Resize element 30 to 75%, mirror, paste on the right on the frame layer.
Paste element 80, free rotate to the right at 90, move to the bottom on the frame layer, duplicate, mirror.
Resize element 98 to 50%, move below the frame paper and up by the tube's head, duplicate, move over to the right more with just two hearts showing.

Resize element 67 to 45%, paste at the top of the frame, duplicate twice and place where you like.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

A Night to Remember

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alex Prihodko.

You need a license to use this art work. Please do not use without a license.
The tube I am using is called Blossom Fairy.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.
PTU Scrap Champagne & Glitter by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

 DD Mask NWM 2  HERE

Check out the rest of the blog HERE

Font of Choice, I used Amarillo

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 15, apply your mask, delete, merge group.

Paste element 43, free rotate to the right at 90 degrees, click inside with your magic wand, expand by 5, paste paper 12, adjust a bit down some, invert, delete, move below the frame.
Mirror your tube, paste, delete, select none, duplicate your tube, go to Adjust, Blur, Gaussian blur on 4, change the blend mode to screen, merge down.

Resize your tube to 45%, paste off to the right more.

Resize element 17 to 35%, paste above the tube layer on the right duplicate, mirror, move back to the right.

Resize element 61 to 40%, paste by the boots on the right.
Paste element 29 on the right just above the mask layer, duplicate, move to the left and down.

Paste element 92 at the upper left above the mask layer, duplicate, mirror, flip, adjust.
Paste element 16 below the glitter ball layer at the bottom.
Paste element 57 below the tube layer at the upper right on the frame, duplicate, flip, mirror.

Paste element 39 on the right just above the glitter ball.
Resize element 67 to 50%, paste on the left at the bottom.
Resize element 10 to 65%, paste below the telephone on the left.
Resize element 70 to 35%, place below the phone.
Resize element 94 to 45%, paste below the champagne bottle on the left.
Resize element 99 to 65%, paste below the watch on the left.
Resize element 42 to 40%, paste on the left below the champagne bottle.
Paste element 27 at the upper left below the glitter ball.

Paste element 82 on the circle layer at the upper left, duplicate, merge down, duplicate, mirror, flip and adjust.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.