Fluffy Winter

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Very Many.

You need a license to use this art work. Please do not use without a license.
The tube I am using is called Fluffy.

 You can find this art at their store  HERE

Supplies Needed

I used PSPX...but any of them should work.
PTU Scrap kit PINE by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

 RD Mask Set 142_Mask 4  HERE

Check out the rest of the blog HERE

Font of Choice, I used Amarillo

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 6, apply your mask, delete, merge group, then paste paper 7, apply the same mask again, merge down.

Paste element 58, resize to 90%.

Resize your tube to 45%, paste off to the right more.

Resize element 48 to 45%, paste below the window layer on the left, erase any of the hoofs showing below the window.

Resize element 96 to 50%, paste at the bottom of the window on one side, duplicate, mirror, adjust.

Resize element 17 to 50%, paste below the greenery, move to one side and up a bit, duplicate, mirror.

Resize element 79 to 35%, paste above the tube layer on the left.

Resize element 51 to 40%, paste on one side under the greenery, duplicate, mirror.

Resize element 100 to 40%, paste at the bottom below the greenery, duplicate, mirror.

Resize element 39 to 65%, paste above the mask layer on the right, duplicate, mirror, adjust both how you like, erase some behind the moose.

Resize element 73 to 25%, paste below the tube layer.

Resize element 52 to 25%, paste on the right above the tube layer.

Resize element 37 to 50%, paste below the greenery on one side, duplicate, mirror.

Resize element 74 to 30%, paste on the left below the greenery.

Resize element 36 to 35%, paste on the right below the greenery.

Resize element 26 to 90%, paste just below the window layer.

Resize element 14 to 60%, paste on the window layer.

Resize element 22 to 40%, paste on the window layer on one side, duplicate, mirror.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Solstice Winter

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.
The tube I am using was December 2014 Calendar tube.

 You can find this art at his store  HERE

Supplies Needed

I used PSPX...but any of them should work.
PTU Scrap kit SOLSTICE by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

  Moonbeam and Spiderweb Mask 62  HERE

Check out the rest of the blog HERE

Filters

Xero-Soft Mood, Clarity

Font of Choice, I used La Pointe's Road

Drop shadow is usually V-2 H-2 Black, 50, 5
On this I used a lighter Drop Shadow, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 14, apply your mask, delete, merge group.

Paste element frame 55 more on the left, resize to 90%, free rotate to the left at 15 degrees, click inside with your magic wand, expand by 5, paste paper 7, invert, delete, mirror your tube, paste, delete select none. 
Apply the xero filter-Soft Mood first then Clarity

Resize your tube to 90%, paste on the right side of the frame, duplicate, Adjust, Blur, Gaussian blur at 4, change the blend mode to hard light, merge down.

Paste element 33 on the left above the frame layer.
Paste element 36 at the top just above the mask layer, duplicate, mirror, adjust.
Resize element 71 to 55%, paste on the upper right below the tube, duplicate, free rotate to the right at 90 degrees, move below the paper layer and down more on the right, duplicate again, mirror.

Resize element 110 to 50%, paste above the tree layer on the left.
Resize element 83 to 80%, paste above the log candle layer on the right.
Resize element 21 to 20%, place at the bottom below the log candle layer, duplicate a couple of times and place where you like.

Paste element 98 above the tube layer at the bottom, duplicate twice, move below the tube layer and down, mirror the other one.

Resize element 26 to 20%, place on the top layer at the bottom where you like.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Believe in the Magic of Winter

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Fiodorova_Maria.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.
THIS KIT WILL BE RELEASED ON SUNDAY
PTU Scrap kit Winter Magic by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

  Moonbeam and Spiderweb Mask 62  HERE

Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5
On this I used a lighter Drop Shadow, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 5, apply your mask, delete, merge group.

Resize your tube to 25%, paste a little off center.

Resize element 21 to 85%, place under the tube at the bottom.

Resize element 45 to 85%, paste below the snow layer on one side, duplicate mirror.

Paste element 52 on the right below the tube, resize to 70%.

Paste element 24 on top of the tree layer.

Resize element 62 to 70%, place on the right side above the tube layer..

Resize element 2 to 95%, paste below the tube layer toward the top, duplicate, move to the top layer and down toward the bottom.

Resize element 40 to 75%, paste at the bottom, being on the top layer.

Resize element 20 to 10%, duplicate as many times as you like and place on the snow where you like.

Resize element 38 to 60%, paste on the left below the cloud layer, duplicate, mirror, move down some.

Resize element 4 to 15%, place at the bottom by the dress on the left,  under the cloud layer.

Resize element 41 to 20%, place by the flowers.

Resize element 43 to 20%, paste below the tube on the left, duplicate, move up a bit.

Resize element 94 to 20%, duplicate, place at the bottom where you like.

Resize element 58 to 50%, paste below the deer on the right, duplicate, mirror, adjust.

Resize element 67 to 50%, place below the deer on the right, duplicate, mirror.

Resize element 66 to 40%, paste below the mushroom layer on one side, duplicate, mirror.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Mistletoe Cowgirl-PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Nocturne.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE 

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Holly by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here 

  WSL_Mask 84 HERE

Filters

Xero-Soft Vignette

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 10, apply your mask, delete, merge group.

Paste element 35, resize to 85%, click inside with your magic wand, expand by 5, paste paper 10, invert, delete, paste your close up tube, delete, select none.

Take your free hand tool and draw around the bow that is hanging inside the frame and delete.

Duplicate your tube, go to Adjust, Blur, Gaussian Blur, number on 4, change the blend mode to overlay, merge down.

 Apply the xero filter-Soft Vignette with these settings

Elliptical, foreground color,

Diagonal Dots, 0, 0, 0, 255

Paste element 68 at the upper left below the paper layer of the frame, duplicate, mirror, duplicate, flip, duplicate, mirror.

Paste your tube on the top layer on the left, resize to 45%.

Resize element 64 to 25%, paste below the tube layer at the upper left.

Resize element 63 to 30%, paste at the upper right corner, free rotate to the right at 40.

Resize element 10 to 50%, free rotate to the right at 90, paste just above the frame layer on the left, duplicate, mirror.

 Resize element 49 to 40%, duplicate your tube on the tag, mirror, slide down below the globe ball, erase the parts of the tube outside of the globe, duplicate, adjust, gaussian blur, number on 4, change the blend mode to screen, apply the xero filter, Soft Vignette but change the amount to 4 this time, then being on the globe, merge down.

Resize element 38 to 55%, paste above the tube layer to cover the straight cut of the tube at the bottom.

Resize element 12 to 25%, paste below the globe on the left, duplicate, mirror.

Resize element 67 to 45%, paste by the log on the left, being on the top layer.

Resize element 66 to 30%, flip, paste below the greenery on the right, duplicate, move down some.

Resize element 85 to 50%, paste on the log on the left.

Resize element 62 to 30%, paste on the right below the globe, duplicate, mirror, move below the log on the left.

Resize element 54 to 80%, paste on the top layer and adjust.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU_Christmas Kiss

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Nocturne, this is an Exclusive.

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE 

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Christmas by Irish Princess Designs  HERE

You can also find this kit  here, here, here 

  DD Winter Masks 3  HERE

Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 10, apply your mask, delete, merge group, resize larger to 110%.

Paste element 48, resize to 70%, click inside with your magic wand, expand by 5, paste paper 10.

Resize element 47 to 90%, paste at the bottom of the frame.

Resize element 3 to 35%, paste at the bottom on top of the garland you just pasted, duplicate, resize to 85%, move to one side, duplicate, mirror.

Resize element 89 to 25%, paste on the left below the flower.

Resize element 94 to 25%, paste above the first ginger bread and move down some, free rotate to the left at 15 degrees.

Resize your tube to 45%, place off center.

Resize element 41 to 75%, paste on the right below the tube layer.

Resize element 53 to 25%, paste at the bottom in front of your tube.

Resize element 92 to 15%, place by the cup.

Resize element 12 to 35%, paste behind your tube.

Resize element 91 to 35%, paste on the left below the tube.

Resize element 59 to 70%, place at the top of the frame, mirror, adjust.

Resize element 4 to 30%, place on the left side by the shoes of your tube.

Resize element 90 to 25%, paste below the gingerbread cookies on the left.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.