Sweet Summer FTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ismael Rac.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap by DigiCats and (Dogs)  HERE
The Fruit of our Labor Blog Train

Mura Meister-Copies

WSL Mask 84 HERE

Font Great Vibes 

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image, size you like working with
I use 800 by 800 and resize later.
Paste paper #4 and apply your mask, resize mask later if needed to fit the tag better.

Paste the DCD-FooL Strawberry element, resize to 50% and apply Mura Meister-Copies,  set on Encircle, leave everything else at the settings it is set at.
Take your magic wand, click inside, expand by 5 and paste paper #4, invert and delete, move below the frame.

Copy and paste ribbon #2

Copy and paste DCD-FooLFrame #1, click inside with your magic wand, expand by 2 and paste paper #2, invert and delete, but do not deselect.

Resize your tube if needed and paste one on one side, and then mirror your tube and paste on the other side, delete each one, erase any parts you do not want showing in each frame area.

Merge your tube layers together, duplicate, gaussian blur at 4, change the blend mode to hard light and merge down.
Resize the flower branch 2 to 90% and place just above the mask layer, duplicate and mirror, adjust to your liking.

Being on the top layer, resize the brown jug to 50% and place on the left side and then resize the strawberry cupcake to 35% and place on the left side by the jug.

Resize bugsie 1 to 15% and rotate to the right by 15 degrees and place where you like, duplicate once or twice and place.

Copy and paste the glitter and resize to 90% and place on top of all layers.
Resize bird 1 to 40%, mirror and place on the right side, erase some of the legs that is showing over the frame layer.

Resize the tag to 50% and free rotate to the left by 25 degrees and move up to the left side of your tag.

Add any other elements that you would like and once happy with your tag, close off your background and merge visible.

Resize first and then add your copyrights and name and you are done.

Hope you enjoyed doing this tut.

Happy Spring FTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of PinUp Toons.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Template Happy Spring by TwyztedT's Playroom HERE  
WSL Mask 302 HERE
Scrap Quiet Bunnies by Killer Kitty  HERE
Part of Creative Crazy Silent Spring Blog Train
Xero Filter-Porcelain and Ultraviolet
penta.com filter-jeans

Font Satisfaction 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*


Open your template, duplicate and close the original, delete the credits.

Go to image, canvas size and change to what you prefer,
I usually do 800 x 800 and resize later.

Paste paper #12, apply your mask and delete.

Select Raster layer #3 on the template, resize paper #9 to 80%, paste, invert and delete.
Raster layer #4 add more noise to it at 50%
Raster layer #2, resize paper #7 to 90%, paste, invert and delete.
Raster layer #10, paste paper #17, invert and delete.
Raster layer #5, paste paper #12, invert and delete, keep it selected and paste your close up tube and delete.
Copy Raster layer #5, paste paper #11 invert and delete, keep selected, having mirrored your tube, paste and delete.
Add the penta.com filter-jeans at default settings to the papers.
On your tube layers, duplicate, gaussian blur at 4, change the blend mode to hard light, merge down and apply Xero filter-Porcelain first and then ultraviolet with these settings
127, 127, Highlights, 5
On all the white frames I added noise at 50%.
Raster layer #7 the flowers, select and resize paper #1 to 75% and paste, invert and delete.
Move the wordart down a bit, select and paste paper #12, invert and delete.
Go to effects, apply inner bevel shape #2, width 4,
0, 2, 0, 0
48, 50, 30 color white.
Then select all, float, defloat, new raster layer, fill with white and move below the wordart layer.
Paste the Doodle swirl under the wordart layer and mirror.
Paste the Pink embellishment in the center of the two frames.
Resize Sparkle #2 to 75% and being on the tube layer, paste there.
Resize the kitty to 40% and being on the top layer place on the left side.
Resize the mushrooms to 25% and place below the wordart.
Paste your full length tube and mirror an move to the right side.

Once happy with it all close off any background used and merge visible and resize.
Add your copyrights and name and thats it.

Hope you enjoyed doing this tut.

She's a Bookworm FTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  PinUp Toons.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Cluster Frame by Julie's Jazz Designz HERE
Made from a PTU kit called Bookworm by Lexi Creations HERE
WSL Mask 302 HERE
Mura Meister Filter-Copies

Font Satisfaction 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

This is an easy peasy one to do

Open the Cluster Frame, duplicate and close the orginial.
Go to image, canvas size and change to what you prefer,
I usually do 800 x 800 and resize later.

Flood fill with a color of choice, then type out book worm, apply Mura Meister-Copies-Tiling (angle) and only change the gap setting to 3, merge down with your color layer and apply your mask, delete.

Take your free hand selection tool and draw around your frame, new layer and fill with #e0d0bc or color of choice and move below the frame layer.

Do not deselect yet

Paste your tube, duplicate and mirror, adjust how you would like them, then invert and delete. Merge the 2 tubes together and be sure they are below the frame layer. Apply Mura Meister-Copies-*Line, with the 1/n fade out box checked.
Select none now.

Duplicate the tube layer, Adjust, gaussian blur at 4 and change the blend mode to mutiply and merge down.

Paste your tube on top of the frame layer, duplicate, gaussian blur at 4, change the blend mode to overlay or whatever you prefer.
Once happy, merge and resize your tag.

Add your copyrights and name and thats it.

Hope you enjoyed doing this tut.

Elegant Spring FTU

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Misticheskaya.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Elegant Spring by Irish Princess Designs HERE
Thanks for sharing
WSL Mask 222 HERE

Font Great Vibes 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*



Open a new layer with whatever size you are use to working with.
I always use 800 x 800 and resize later
Paste paper #10 and apply your mask and delete.

Resize the log to 85% and paste.

Paste Frame 2, resize to 75% and move to the right a bit.
Using your magic wand, click inside the frame, expand by 5, new raster layer, fill with a color of choice, I used #fceec4.
Select none and move below the frame layer. Add a light texture to the paper.

Paste the grass and resize larger to 105%.

Resize and paste your tube and place on the grass part.

Climbing vine, resize to 70% and free rotate to the right 20% and place on the right side of the frame, duplicate and mirror.

Resize the grass n rock to 50%, place on the left side below the grass layer, duplicate and mirror and place where you like.
Paste the tree on the left below the grass n rock layer.
Resize the spring sign to 50%, free rotate to the right by 10% and paste behind your tube on the right side.
Resize the dandelion to 15%, duplicate twice and place where you like them, just below the grass layer.
Resize the floaties to 20% and paste above each dandelion.
Resize the spray to 50% and place on the grass, duplicate and mirror.
Resize the plant to 25% and place behind the grass layer on the left and duplicate and move it to the right.

Resize the lantern to 75% and place behind your tube on the right, below the spring sign layer.

Resize the bottle to 30% and place on the right just below the grass layer, duplicate and mirror and move down a few layers.
Resize the tree to 50% and place inside the frame.
Resize the bubbles to 50% place inside the frame behind the tree, duplicate and place how you like.

Resize the twig to 50%, free rotate to the left 90%, place just above the bottle layer on the right.

Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.