Hot Steampunk Babe PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alex Prihodko.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 Steampunk Lisa by AmyMarie and
you can purchase it at her store HERE
WSL Mask #84 HERE
Mask Moonbeam and Spiderwebs #55 HERE
Xero Filter-Soft Mood
Font for name Andes 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper #22 and apply WSL Mask 84 first, then
paste paper #5 and apply your mask, delete and merge group.
Paste paper #4 and apply the mask again, delete and merge.
Merge these two mask together.

Resize and paste your tube, if using the same one I am, I resized it to 75% and placed it on the right side.

Paste element #47 on the right behind your tube and move up some. Duplicate this layer and resize to 50% and move toward the bottom to your liking.

Paste element #31 on the left at the bottom part, take your freehand selection tool and draw around the outer portion, paste your second closeup tube, invert and delete, also paste paper #22, delete and select none, move the paper layer below the tube layer. Change the blend mode to hard light.
Apply the Xero Filter- Soft Mood. Merge these 3 layers together, duplicate and resize to 50% and move over to the right side behind your tube.

Paste element #138 on the left side. Resize element #19 to 50%, duplicate a few times, and flip a couple of them and  place around element #139.

Paste element #136 on the left on the top layer.

Paste element #102 and place it at the bottom just above the mask layer.
Paste element #48 on the upper left side just above the mask layer.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and
add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Diva Loves Pink Forum Set PTU



 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Keith Garvey.

You need a license to use this art work. Please do not use without a license.

You can find his art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Pretty In Pink by Sassi Designs HERE
Xero Filter-Porcelain
Mura Meister Copies
AAA Foto Frame 
Font for name Simply Glamorous 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 600 x 250

Paste paper #21 and crop your tag.
Resize frame #3 to 35% and paste in the center, click inside with your magic wand, expand by 2 and paste paper #18, invert and delete.
Do not deselect yet, mirror your tube, and paste the close up tube you are going to use, delete, select none.

Duplicate your closeup, gaussian blur at 4, change the blend mode to overlay or one you prefer, merge down.
Apply Xero Filter-Porcelain. Lower the opacity to 70%.

Paste sparkle #1 and move to one side, duplicate and mirror.

Paste your tube and place to the right.

 

Resize element #144 to 50% and free rotate to the right at 90 degrees.

Apply Mura Meister-Copies-Line, then move down and have the tops of the flower showing, duplicate and flip, adjust to your liking.

Paste element #144 again and place one on the right and mirror, having rotated like before first, merge these two together.

Paste element #132, free rotate to the right, place how you like, duplicate, mirror and erase the part over the frame area.

 

Resize element #129 to 40% and place on the left side, below the line of flowers.

Resize element #128 to 30% and place on the left side up on the frame, bring it to the top layer.

Resize element #134 to 30% and place behind the tube on the right side.

Resize element #126 to 30%, free rotate to the right by 20% and place on the right below the cat layer.

 

Resize element #10 to 30% and place behind the bottle on the left.

 

Resize element #138 to 20%, place on the bottle and erase part of it to make it look like it is hanging over the bottle.

 

(Merge visible without the main tube, so you can use this for your Avator)

Then merge visible with the tube showing and crop, then apply the AAA Foto Frame with these settings

5, 0, 0, 2, 0, 0, 0, 50

 

For the Avator I used 200 x 200

You may wish to do smaller or some other size.

Copy and paste your tag without the tube and resize to 85%.

Adjust how you like it, then crop and merge visible and apply the AAA Foto Frame with the same settings as before. 

Add all copyrights to both your tags and your name

and that is it.

Hope you enjoyed doing this tut.

Time for Love PTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alex Prihodko.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 Anita by AmyMarie and
you can purchase it at her store HERE
Mask Moonbeam and Spiderwebs #45  HERE
Font for name Tagettes 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #21 and apply your mask, delete and merge group.
Paste frame 49, with your magic wand select inside the frame and expand by 2, paste paper #24, invert and delete, move below your frame layer.

Paste element #74 on top of the frame and erase the part on top.

Back on the top layer, paste element #44 and resize to 85% and place on the right side.
Resize your tube if needed and paste on the left side of the frame.

Resize element #45 to 75% and place at the top right of the frame.

Resize element #61 to 50% and place on the right under element #45. 

Resize element #74 to 70%, paste in the frame, and change the blend mode to Luminance(L)

Paste element #46 and free rotate to the left at 90 degrees and place on the left behind your tube layer.

Being on the top layer, paste element #71 move down some, duplicate and flip.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and
add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Fun Fun in The Sun FTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Bits N Bobs.

You need a license to use this art work. Please do not use without a license.

You can find her art at PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Summer Days by Manipulated by Magik  HERE
Monti Blinds Mask HERE
Template #48 by Flaminsal HERE
Xero Filter-Soft Mood, Porcelain and Clarity
Font Great Vibes for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*


Paste paper #3 and apply your mask, delete and merge group.

Open your template, hold the shift key down and hit the letter D to duplicate and close the orginial.
Delete the credits.

Paste frame #3 just above the orange circle and circle frame, click inside with your magic wand, expand by 2 and paste your closeup, invert and delete. Do not deselect, paste your paper of choice, I used paper #14, delete and move below the tube layer.
Apply Xero Filter-Soft Mood, Porcelain and then Clarity.
Delect the orange circle and circle frame from the template.

Resize your tube and place on the left side.

Move the wordart more to the right side now.

Paste the sand and move to the bottom and below your closeup tube layer.

Paste the bench and place it behind your tube layer on the left.

Resize the sun to 65% and delete the one from the template and place this one in its place, duplicate, gaussian blur at 15.  Paste the sunray on the sun and adjust to your liking.

Merge the 2 red squares together, paste paper #3, invert and delete.
Select the pink stripes and paste paper#16, invert and delete.

Resize the beach ball to 50% and place behind your tube on the left.
resize the beach ball to 50% and place by the ball.

Resize the weeds to 75% and place on the right below the wordart. Duplicate and mirror and move below the beach ball layer.

Resize the puppy to 30% and place by your tube.

Resize the flipflop to 30%, change the color to your liking, duplicate and place how you like.

Resize the starfish to 25% and place how you like.

Resize the drink to 25% and place by your tube.

Add any other elements that you would like.

Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.

Summertime Fun FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Bits N Bobs.

You need a license to use this art work. Please do not use without a license.

You can find her art at PFD  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Fun in Da Sun by Black Widow Creationz  HERE
Monti Blinds Mask HERE 
Template #47 by Flaminsal HERE
Xero Filter-Soft Mood, Porcelain and Clarity
EyeCandy4000-Glass
Font Great Vibes for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*


Paste paper #1 and apply your mask, delete and merge group.
Open your template, hold the shift key down and hit the letter D to duplicate and close the orginial.
Delete the credits.

Paste frame element #24, over the rectangle frame layer, take your pick tool and size the frame you just pasted to fit how you like, then delete the Rectangel frame and Red rectangle square.
Click inside the frame with your magic wand, expand by 15, add a new raster layer, fill with #ffc088 and move below your frame layer, keep selected and paste your tube, invert and delete, select none.
Apply Xero Filter-Soft Mood, then Porcelain and then Clarity.
Back on the paper layer, apply VM Extravaganza-Transmission with these settings
40, 0, 12
Being on the frame layer, paste the palm tree to the right side.
Resize your tube and place on the left side and apply Xero Filter-Porcelain and Clarity.

Paste element #11 and place below all layers of the template.

Resize element #19 to 20%, duplicate a couple of times and place how you like them.

Resize element #20 to 20% and duplicate and place how you like them.
Resize element #1 to 30% and rotate to the left 30%.

Select the Orange circle on the temp and paste paper #1, invert and delete.

Merge the two Green Rect together and apply paper #5, invert and delete.

Merge the Top and Bottom Stripes together, add a new raster layer and fill with #f67a10.

Resize element #15 to 45% and paste in the small orange square below the wordart.
On the small square frame, new raster layer and fill with #57a5ac, apply EyeCandy 4000, glass, with the first color being white.
Settings are 4.65, 75, 30, 35, 50, 0, 100
Apply the glass to the wordart also.

Add any other elements that you would like.

Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.

 

Lost in Thought PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alex Prihodko.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 Imagine by AmyMarie and
you can purchase it at her store HERE
Mask Moonbeam and Spiderwebs #37  HERE
Xero Filter-Ultra Violet and Radiance
Font for name Before the Rain 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #21 and apply your mask, delete and merge group.
Apply Sparkle #102 to the mask, duplicate and move up some.
Paste frame element #50, resize to 90%, click inside with your magic wand, expand by 2, paste paper of choice, I used #21.
Do not deselect yet, mirror your tube and resize if needed, paste, delete.
Change the blend mode to screen, select none.
Apply the Xero Filter-Unltra Violet with these settings
150, 150, Highlights and 2
Then apply Xero Filter-Radiance.

Paste element #49 and move to the bottom of the frame, duplicate and adjust to your liking.

Resize and paste your tube on the right side.

Paste element #5 and place behind the tube, erase the gray part of the flower.

Paste element #7 on the left side, move below the tube layer.
Duplicate and mirror and move back to the left side and below the first flower layer. Erase any stem showing below your tube.
Paste element #76 and place on the left below the flower layers, duplicate and move up. Adjust to your liking, erase any stem below your tube.

Paste element #58 and resize to 75%, free rotate to the right at 90 degrees, place between the flowers on the left.

Resize element #39 to 25%, free rotate to the left 25 degrees and place at the top right of your tag, be sure to sharpen.
Duplicate a couple of times and place how you like. Play around and resize them to different sizes and place.

Resize element #4 to 75% and place on the left side below the tube layer.

Place element #47 below your tube layer on the right side.
Being on the top layer, add sparkle #98, place toward the bottom, duplicate and move toward the top area.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and
add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Diva Loves Pink PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

You need a license to use this art work. Please do not use without a license.

You can find his art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Pretty In Pink by Sassi Designs HERE
WSL Mask 222 HERE
Xero Filter-Porcelain
Font for name Simply Glamorous 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper #19 and apply your mask, invert and delete.
Resize the mask to fit your tag.

Paste Frame 3 and resize to 75%, click inside with your magic wand and expand by 3, paste paper #18, invert and delete, add your closeup and delete, select none.
Duplicate your closeup, gaussian blur at 4, change the blend mode to overlay or one you prefer, merge down.
Apply Xero Filter-Porcelain. Lower the opacity to 70%.

Paste your tube on the top layer and over to the right, move below the frame layer, duplicate and move this one to the top layer and erase any extra over the frame. Also erase the little bit showing under the frame.

Paste element 144 and resize to 65%, free rotate to the left, take your pick tool and rotate it just a bit to the right, duplicate and mirror.
Paste element #132 and free rotate to the left, duplicate and mirror, erase any in the middle area you do not want.


Paste element 131, the bow and resize to 75% and place at the bottom of the frame in the middle.

Resize element #129 to 50% and place on the left side below the bow layer.
 
Resize element #138 to 30% and place on top of the bottle and erase part of it to look like it is hanging over the bottle.

Resize element #39 to 30% and place on the left, by the bottle.

Resize element #128 to 50% and place on the frame on the left side. Resize element #127 to 50% and place on the right side.
Resize element #134 to 35%, mirror and place on the right side.
Resize element #126 to 45% and place on the right and with your pick tool, rotate it a bit to the right.

Paste Sparkle #3 on top of all layers.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and

add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Biker Night N the City PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Zlata_M.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 City At Night by AmyMarie and
you can purchase it in the Clearance section
at her store HERE
WSL Mask 208  HERE
Font for name Sick Capital Vice 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #16 and apply your mask, delete and merge group.

Paste cityscape 2 and change the blend mode to Luminance (L)

Resize frame 1 to 80% and paste on top of the cityscrape scene.

Paste element #2 and place at the top of the frame and erase the sides hanging down.

Paste wire #3 and move to the bottom of the frame.

Paste Drum #3 on the left side of the frame.

Paste branch #1 on the left side behind the drum layer, duplicate and mirror.

If using the same tube, resize the tube and the bike to 85% and place how you like them.

Resize collar #1 to 50% and place by the drum and erase the back part to make it look like it is over the drum.

Resize the cat to 40% and place sitting on the drum.

Resize bomb #2 to 40% and place on the right side.
Resize the bracelet #2 to 40% and place on the right side behind the bomb layer.

Resize element #13 to 50% and place by the bomb and bracelet layer.

Place the moon on the right side, just above the mask layer.

Paste the fence just below the frame layer.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and
add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Just a Country Girl PTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Elias Chatzoudis.

You need a license to use this art work. Please do not use without a license.

You can find this art at Elias's Store   HERE

Supplies Needed

I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 Down Home Girl by AmyMarie and
you can purchase it at her store HERE
Gems Mask 37  HERE
Font for name Coolock Black 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #10, resize your mask to 120% and then apply to your paper and delete, merge group.

Paste element #33, free rotate to the right or left 90 degrees, duplicate and mirror, erase the center parts of both, then merge these 2 together.
Click inside with your magic wand, expand by 5 and paste your closeup, invert and delete, change the blend mode to soft light.

Paste element #18, move below the mask layer, duplicate, mirror, duplicate, flip, duplicate mirror, merge these 4 layers together.

Paste element #35 below the frame layer and adjust how you like it.

Paste your tube layer and resize to 90%, if using the same tube, and place on the left side of the frame.

Place element #108 on one side, duplicate and mirror and merge these two layers together.

Paste and resize element #87 to 65% and place on one side, duplicate a couple more times and place how you like them
Paste and resize #65 to 50%, duplicate a few times and arrange how you like them.

Paste layer 42 on the right side.

Resize element #90 to 70% and place below the railroad track layer and on the right side.

Resize element #60 to 50% and place by the tree, duplicate a couple of times and move them around to your liking.

Resize element #30 to 50% and place on the right side below the car layer and take your pick tool and rotate it a bit.

Paste element #59 and place on the left behind your tube layer, dupilcate and move up a bit.

resize the tires to 50% and move to the right below the tree layer.

Resize the cat to 45% and place in between the rocks on the bottom.


Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and
add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Pirate Jack FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Zlata_M.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD in the Exclusive  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Pirates Caribbean by Suzi HERE
WSL Mask 84 HERE
Xero Filter-Soft Mood
Font for name Meddon 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #7 or one of choice and apply your mask, delete and merge group.

Paste frame #6 and resize to 85%, click inside with your magic wand, expand by 2, paste element #13
and move below the frame layer to the right.
Paste the closeup tube and move to the left side, invert and being on each layer delete and select none.
Duplicate your tube layer, apply Xero Filter-Soft Mood, change the blend mode to soft light and merge down.
Duplicate the frame layer, change the blend mode to Burn and lower the opacity to 50% or to what you like the looks of.

Paste element #44 on the right side.

Paste and resize element #27 to 75% and place on the right side.
Paste element #29 and resize to 75% and place how you like.

Resize element #70 to 50%, mirror and place on the left side.

Resize element #32 to 75% and place on the left side.

Resize element #15 and #16 to 50% and place on the left below the coin layer.
resize element #25 to 75% and place how you like it.

Mirror and place element #56 on the left side between the bottle layers.

Resize element #8 to 50% and place below the coin layer toward the left side.

Resize element #78 to 40% and place at the top of the frame, duplicate twice and place one on each side of the frame.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and

add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Pirate of the Sea FTU



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Diana Gali.

You need a license to use this art work. Please do not use without a license.

You can find this art at SATC Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Pirates Caribbean by Suzi HERE
WSL Mask 84 HERE
Xero Filter-Porcelain (Optional)
Font for name Meddon 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper #7 and apply your mask, invert and delete.
Resize the mask larger to 112%

Resize frame #1 to 75% and paste on your new image and sharpen once.

Click inside with your magic wand and expand by 5, paste paper #4, invert and delete, move below the frame layer, select none.

Resize element #79 to 60%, place on the paper layer and move a little to the right, change the blend mode to hard light.

Resize element #6 to 50% and place on the right and toward the middle.
Resize element #29 to 50% and place in front of the crates.

Resize element #7 to 50% and place on the right.

Resize element #66 to 40% and place on the right side behind the chest.
Apply Xero Filter-Porcelain

Resize element #16 to 40% and place below the coin layer in the center.

Resize element #65 to 25% and place by the bottle.
Apply Xero Filter-Porcelain

If using the same tube I am resize to 75% and place on the left side.

Resize element #13 to 40% and place on the left side behind your tube layer.

Paste element #80 over the bottom part of your tube layer.

Resize element #76 to 30%, free rotate to the left at 30 degrees and place on the left side.

Paste elment #51 on the right side behind the chest layer.

Go back to your element #66 the first monkey, duplicate, resize to 80% and place behind the tree, duplicate and move above the tree and erase part of the body showing over the truck of the tree.
Apply Xero Filter-Porcelain.

Resize element #43 to 70% and place on the left side behind your tube layer.

Resize element #70 to 35% and place on the right behind the chest and adjust how you like it.

Resize element #72 to 50% and place on the left side below your tube layer, duplicate, mirror and take your pick tool and rotate it a bit.

Resize element #50 to 75% and place below the mask layer on the left side, duplicate, mirror and move lower on the right side.
Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and

add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

The Leather Look FTU

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap BQ Blog Train Inspired by PINUPTOONS by Niqui's Designs  HERE
WSL Mask 84 by HERE

Xero Filter-Radiance
Font akaDora for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you are use to using, can alway resize later.
Paste paper #2 or one of choice and apply your mask and delete.

Paste element #11, click inside with your magic wand and expand by 15, paste paper #8, invert and delete. Move below the frame layer. Do not deselect yet, mirror your tube first before you paste it, then paste your second bigger tube, and delete. Apply Xero Filter-Radiance

Paste element #26

Paste element #16 and resize to 95% and place below the mask layer on one side of the frame, duplicate and mirror.

Paste element #2 and move to just above the mask layer.
If using the same tube as I am, resize to 75% and place on the right side and adjust element #2 now under your tube.

Resize element #17 to 50% and place on the left side, just below the tube layer. Sharpen a couple of times, then duplicate and resize to 75% and move up some on the left side.
Resize element #3 to 50% and place on the left side and sharpen.

Resize element #23 to 50% and place on top of element #17 on the left side.

Resize element #29 to 50% and move below your tube layer on the right and move to how you like it and erase the parts you do not want.
Duplicate and mirror and move to the upper left and erase the parts you do not want showing again.

Resize element #13 to 75% and place behind your tube, free rotate to the right 90 degrees and adjust behind your tube.
Duplicate, mirror and resize to 75% and place where you like on the left side.

Resize element #27 to 75% and place at the bottom and erase any part you do not want showing.

Resize the butterfly to 35%, mirror and place at the upper left corner of the frame. Duplicate and resize again and place where you like.
Add any other elements you would like.

Resize your tag and add all copyrights
Add your name and that is it.

On the name I added EyeCandy4000-Chrome and recolored, then selected, expanded by 2, added a new layer and fill with black and moved below.

Hope you enjoyed doing this tut.

Faerie Land FTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Elias Chatzoudis.

You need a license to use this art work. Please do not use without a license.

You can find this art at his store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap El Bosque Animado by Bel Scraps HERE
Moonbeams and Spiderwbs Mask 45  HERE
Xero Filter-Soft Mood, Mistifier and Clarity
Font ScriptinaPro for name 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later.
Paste paper #5 and apply your mask and delete.
Paste paper #4 and apply the mask again, delete and flip, merge down.

Resize frame Marco to 35% and paste on your mask layer.
Duplicate, resize to 80% and move to the left and below the first frame layer and erase the part showing inside, duplicate and mirror, making any adjustments at this time.
Close off your mask layer and
merge these 3 frame layers together.

Paster your close up tube and move below the frame layer, take your magic wand and click inside, expand by 2, invert and delete.
Apply the xero filter-Soft Mood and then Mistifier and change the haziness to 200. Duplicate, gaussian blur at 4 and change the blend mode to screen, merge down.
Then apply xero filter-Clarity

Resize herbia2 to 25% and place at the bottom of the frame.

Resize herbia  to 25% place on one side, duplicate and mirror.
Resize herbia 4 to 35% and duplicate a couple of time and place how you like them.

Resize and paste your tube and move to the right a bit.

Resize flores 2 to 15% and place below the herbia layers and duplicate a couple of times and place how you like.

Resize Flors3 to 15% and place where you like, duplicate a couple of times.

Resize the caracol to 10% and place on one side duplicate, mirror and place by the first one.
Resize the Flores to 40% and place at the bottom.

Resize Brillos 2 paste and move to the left below the tube layer, erase the one flower over the face, then duplicate, mirror and move above the tube layer and adjust to your liking.
Resize the Charco to 25% and place below the tube layer on the herbias, duplicate and merge down.

Resize the Banco to 25% and place on the left side and moving below some of the herbia layers, duplicate and mirror.

Resize the Piedra to 10% and place below the tube layer on the right side.

Resize Seta2 to 5% and dulicate a couple of times and place them where you like.
Then go back to the orginial and unsize it and then resize to 10% and place in other areas, below the bench layer this time.

Resize the bottle to 10%, free rotate to the right and place on the left side below the snails...

Resize Hoja 2 to 10% and being on the top layer, duplicate a few times and place in different areas.
Resize the Rama to 30% and being above the mask layer, place how you like, duplicate and mirror and again place how you like it.

Add any other elements that you would like, once happy, close off any background you used and merge visible.

Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.