Tagalicious Tags & Tuts: March 2015

Thursday, March 19, 2015

CT Tag using PTU Affection

CT Tag using the AWESOME kit "Affection" by
Honored Scraps and you can purchase it at
You can find the tube & scrap available at Digital Chaos.

http://digitalchaos.net/

The scrap is also available at Treasured Scraps....

http://treasuredscraps.com/store/

Tuesday, March 17, 2015

Coming Soon - Arthur Crowe Super Sexy Skull

**Coming Soon - Arthur Crowe**
Check out this AWESOME new tube
SUPER SEXY SKULL by ARTHUR CROWE!!
She will also be available with an
EXCLUSIVE matching kit by Creation by Sanie...
You will find them in the store soon!!!

www.arthurcrowesfactory.com/store/

Snags

Monday, March 16, 2015

Amazon Babe COMING Soon

**COMING Soon**

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.
The tube is called Amazon Babe and I am using a matching kit by the same name
by Kizzed by Kelz

You need a license to use this art work. Please do not use without a license.

You can find this art and kit at his store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Amazon Babe by Kizzed by Kelz HERE

RR Mask 2_1 HERE

Font of Choice, I used Mad Beef

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 7, apply your mask, delete, merge group.

Paste element 29, move up to the left some, duplicate and move
down to the right.

Paste your tube so the face is showing in the upper frame, either erase or use your free hand tool to draw around the frame, invert and delete, change the
blend mode to Luminance(L)

Resize the tube to 55%, if using the same one I am and paste, erasing
some of the tree at the top and some of the edges on each side at the bottom.

Resize element 23 to 80%, place on the right side, paste element 21 behind the tube layer and adjust to your liking.

Paste element 26 just above the mask layer on the right side.

Resize element 27 to 55%, place above the tube layer toward the right,
duplicate, mirror, resize to 75%. Duplicate again, move below the tube
layer on the left and up some.

Paste element 14 under your tube layer, duplicate and move over some.

Resize element 34 to 75%, paste behind the tube layer and place how you like,
duplicate, resize to 75%, move below the fern layer and over to the left more.
Resize element 32 to 65%, place on the right side more below the water layers
and erase any of the stem showing below. Duplicate and resize to 65%, mirror
and adjust on the left.

Resize element 6 to 50%, place on the left below the flowers, duplicate and move up a bit.

Resize element 31 to 20%, mirror and place at the upper right.
Paste the sparkle layer above the frame layers.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Saturday, March 14, 2015

CT Tag using CDO 2015 Collab by Honored Scraps

CT Tag using the Collab Portion CDO 2015 by Honored Scraps

and I am using the Artist Steve Baier that you can get at CDO also
You can get this collab for FREE

if you buy any 2 CDO scrap kits between now & 10pm PST 31st March 2015.

http://www.cdoestore.com/

RAC Special Buy 03-14-15-03-15-15

RAC's Goodbye Sale - All items in store 55% off
**RAC Special Buy 03-14-15-03-15-15**
Get The 2012-2015 Clown Me HD SL. FREE with a $2.00 Purchase . Just pop it in your cart at check out. No GC's accepted as a form of payment.

http://store.xeracx.net/

Friday, March 13, 2015

A Rose

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Dixie Black aka Swan'Scraps.
This tube called Rose, she comes with lots of layers
and close ups for you to enjoy.

You need a license to use this art work. Please do not use without a license.

You can find this art at the PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Silence by Honored Scraps at CDO HERE

Click on Extras on the left Monti Blinds HERE
Mura Meister Copies-Encircle

Font of Choice, I used Candlescript Demo

Drop shadow is usually V-2 H-2 Black, 50, 7

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Resize paper 2 to 80%, apply your mask, delete and merge group,
Go to Effects, edge effects and enhance once.

Paste frame 1, resize to 45%, duplicate and move down and to the
right more, once happy with them, merge visible.
Click inside with your magic wand, expand by 5, resize paper 4 to 80%
paste, delete, now paste your original tube in the upper frame,
delete and select none, duplicate, mirror and move to the lower
right frame, erasing an strays showing from the tube.

Resize your tube to 50%, if using the same one I am and paste in
the center of the frames.

Paste element 7, apply Mura Meister Copies-Encircle, move to
just above the mask layer.

Paste element 20 and place on the left side.
Paste element 6 on the left in front of the umbrella, duplicate,
resize to 75%, mirror.

Resize element 9 to 60%, apply Mura Meister Copies-Encircle and move
below the paper layer of the frames.

Resize element 4 to 50%, place on the lower right, duplicate,
move up to the top below the tube layer.

Paste element 13 below the mask layer, move how you like, erase the
ones you do not want showing, duplicate, flip, mirror and adjust, and
erase again parts you do not want showing.

Resize element 16 to 75%, paste below the bow that is on top of your tube at the bottom. Erase the leg part showing below the ribbon.

Paste element 1 below the paper layer of the frame on the right side.

Paste element 2 below the rose circle layer, recolor the beads to match
your tag and move them to the bottom part of your tag.

Resize element 14 to 50%, place on the lower right side how you like, below the tube layer.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Tags using JiJi by Spazz

CT Tags using "JIJI" by Spazz
Comes on its own layers for customizing:

Antlers, Santa Hat, Present, Light Bulb Necklace, Light Bulb Waist lights.

Then plenty of color combo...
and I am using a matching kit by Scrappin Krazy Designs,
both at Spazz Store

http://spazzdart.com/store/...

Check out Scrappin Krazy Designs Blog Here

Thursday, March 12, 2015

Rac Special Buy 03-12-15-03-13-15

**Rac Special Buy 03-12-15-03-13-15**
Get The 2009-2014 Tropical HD SL.
Another beauty to add to your tube collection
You can pick it up at his store with just a $2.00 purchase.
Just pop it in your cart at check out. No GC's accepted as form of payment....

http://store.xeracx.net/

Snags below

Tony T Coming Soon Easter Egg

CT Tags COMING Soon By Tony Tzanoukakis

These tags were made with the awesome tube
Easter Egg and matching kit by Dance In The Rain.
You can find both at his store soon.

http://tonytz.com/store/

Extras Below

Extras

Tuesday, March 10, 2015

CT Tag using PTU Dayz of Summer

CT Tag using the Beautiful kit "Dayz of Summer "
by Honored Scraps.
This kit is filled with 60 elements, 12 papers, 6 frames and 3 wordart.

You will love this kit to tag with. Love the Yellows and Greens.
Artist I used is Anna Liwanag at CDO also
The kit is available at CDO Store...

http://www.cdoestore.com/

RacSpecial Buy 03-09-15-03-10-15

**Special Buy 03-09-15-03-10-15**
Get The 2013-2015 Spring Break Hottie HD SL .
FREE with a $2.00 Purchase . Just pop it in your cart at check out. No GC's accepted as a form of payment.
You can find all his tube at his store

http://store.xeracx.net/...
Extras below