Autumn Dreams

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of PinUp Toons.

 You need a license to use this art work. Please do not use without a license.

You can find this art at CDO HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap by Amy Marie HERE

Xero Filter-Soft Mood

Wordart at CM HERE

Font Before the Rain 

WSL_Mask 84 HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image size of choice, I usually do 800 x 800

Copy and paste paper#18 and apply your mask, delete and merge group.

 Copy and paste paper#22 and apply the mask again, delete and merge group. Resize this mask to 95%.

Copy and paste tree #4 and move to either left or right side,

add xero filter-Soft Mood, duplicate and mirror.

Copy and paste tree #4 again, resize to 85% and place off side of the bigger tree, duplicate and mirror.

Copy and paste tree #2 and place on the right, then copy tree #3 and place on the left, adjust to your liking.

Copy and paste the leaf pile, duplicate and mirror.

Resize the bench to 70% and paste in the center of your tag, go to

Adjust

Hue and Saturation, colorize

and use these settings

Hue 14  Saturation 163

Resize element #27 to 65% and place below the leaf pile layer on the right and move out almost to the edge of the pile or where you like the looks, duplicate and mirror.

Duplicate a couple more times and resize to 75% and place in different areas. 

Resize element #17 to 40 and place in front of the mushrooms you just placed on the right.

Resize your tube to 75% if using the same one I am and place on the bench.

Resize the mug to 15% and place on the bench next to your tube.

Resize element #14 to 25% and place on the log, duplicate and mirror.

Resize element #21 to 45% and duplicate several times and place how you like the looks. Maybe move some down a layer or so and place.

Resize element #16 to 30# and place on the left side, below the acorn layer and make any adjustments.

Duplicate a couple of times and resize smaller and place where you like the looks.

Resize element #26 to 20% and place in the trees where you like, duplicate and mirror.

This next step is optional if you would like to do it.

I took tree #3, change the blend mode to hard light and moved below the other tree layers and duplicated and mirror and placed into position. This just gave it a bit more of the darker orange to show thru and then sharpen once.

Resize element #28 to 50% and place on the trees to make it look like the leaves are starting to fall, duplicate a couple of times and move around.

Resize the wordart to 75% and place at the bottom part of your tag.

I resized the basket to 30% and place on the left side.

Add any other elements that you would like.

Once happy with everything, close off your background if using one and merge visible.

Resize your tag and add your copyrights and name and you are done.

Hope you enjoyed doing this tut.

 

The Beauty of Autumn

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ellie Milk.

This was a prepaid project and is an Exclusive. 

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD HERE

 Supplies Needed

I used PSPX...but any of them should work.

Scrap by Sky's The Limit Blog  HERE
Scrap kit Majestic Autumn HERE

Wordart at CM HERE

Font Scriptina Pro

WSL_Mask 84 HERE

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image size of choice, I usually do 800 x 800

Resize paper #15 to 23%, paste on a new layer, apply your mask, delete and merge.
Resize paper #20 to 20% and paste and apply the mask again, delete and merge.

Resize the tree to 20% and place on the left side.
Resize the lamp to 25% and place on the left side.
Duplicate the tree and resize to 85% and move in front of the lamp and adjust to where you like the looks of it.
Resize Scribble tree 1 to 25%, change the blend mode to hard light and add your drop shadow.
Duplicate and mirror and move below the trees and light on the left.
Reopen the tree again, not the scribble one, the one you used before, resize to 15%, rotate 90 degrees one way or the other, flip and place at the bottom, duplicate and mirror
Resize the cluster to 15% and place on one side, duplicate and mirror.
Open the mushrooms and resize to 15% and place on the left side.
Duplicate, mirror, and move below the cluster layer.
Duplicate again, resize to 65% and move below one of the cluster layers and position where you like.
Take leaf #8, resize to 50% and move to the bottom layer and place on one side, then duplicate and mirror and adjust into place.
Resize the acorns to 10%, duplicate 2 or 3 times and being on the top layer, place them in different areas.
You might want to move some down a few layers, just use your imagination and get what you like the looks of.
Resize the butterfly to 5% and rotate to the left at 30 degrees and duplicate a couple of time and move them around.
Copy and paste your tube and resize as needed and place on the left side.
Copy and paste the wordart and move to the bottom and add your drop shadow.
Once happy with everything, close off your background if using one and merge visible.
Resize your tag and add your copyright and name and you are done.
Hope you have enjoyed doing this tut.
 

Witch Look

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of VeryMany. You need a license to use this art work. Please do not use without a license. You can find this art at SATC HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap called Witch's Lair by
Digital Designs by Carolina HERE
DBV-WBHTemplate HERE
Vm Extravaganza-Transmission
EyeCandy4000-Chrome
xero filter-Soft Mood
Mask by Tonya, Halloween Bats HERE
Font of choice, I used Flower in the Window
 

Drop Shadow usually V2 H2 50 5

Let's get started
Open the template, hold the shift key and hit the d button to duplicate and close the orginial.
Delete the copyright

*Remember to add your drop shadow as you go along*
Resize and paste paper #6, apply your mask.
Select circle one of the template, select all, float, defloat, resize paper #6 first, then paste and invert and delete.
Select none and also delete the template layer, do this with each one.
Circle 2 of the template, do all the other steps as before and paste paper #4 invert and delete.
Select the rays layer, select all, float, defloat, add a new raster layer and fill with #1b0321, then sharpen 3 times and add your drop shadow.
Delete the leaves layer on the template.
 Mirror, copy and paste element #55 on the layer where the leaves were, place to where you like the looks of it, then duplicate,  mirror, move on the left side to your liking.
Select rectangle 2, new raster layer, fill with #63295d.
Apply the VM Extravaganza filter-Transmission with these settings 6, 0, 20
Select circle #3 and paste paper #6 invert and delete.
Select circle 5 layer, add a new raster layer, fill with #1b0321
go to Adjust add/remove noise, noise at 40%.
Select the eclipse layer, resize and paste paper #5, adjust so the moon is not showing, invert and delete.
Do not deselect yet, now add your close up tube, and hit the delete on your keyboard, select none now.
Add xero filter, soft mood to the paper.
On your tube layer, duplicate, blur at 5, change the blend mode to hard light, then merge down.
Select the eclipse frame, apply EyeCandy4000-Chrome
To color it, I went to Adjust, Hue and Saturation, colorize with these numbers 201, 108.
Resize and paste your tube, I mirrored mine.
Resize element 35 to 50% and place on the right below the tube layer.
Resize element #5 to 25% and place on the frame, and then duplicate, mirror and move below the tube layer.
Resize element #18 to 30% and place on the left side.
Resize element #54 to 50% and place by the candle.
Resize element #50 to 35% and place on the left, where you like the looks.
Add any other elements that you like to use.
Resize the broom and mirror, move below the tube layer and position to your liking.
Paste element #47 below the broom layer and move to where you like the looks. I duplicated and mirrored it also.
Resize the bat to 30%, duplicate and place at the top of your tag.
Resize the sparkles, element #43 to 75%, duplicate and place how you like.
Happy with everything, close off the white background and merge visible and resize your tag.
Add your copyright and name and you are done.
Hope you have enjoyed doing this tut. 

 

Steampunk Memories FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Mitzi Sato-Wiuff.

You need a license to use this art work. Please do not use without a license.

You can find this art at PSP Tube Stop HERE

You can find the tube HERE

 

Supplies Needed

I used PSPX...but any of them should work.

Scrap by Digicats (& Dogs) blog HERE 
Scrap kit Harvest of Memories HERE

Xero Filter-Porcelain, Clarity and Mistifier

DBV_Mask 09 HERE

Font WhisperWrite  

Drop Shadow usually V2 H2 50 black

Open a new image to a size you are use to working with
I do mine 800 x 800 and resize later.
Flood fill with color #bb6833 and apply your mask and delete.

*Remember to add your drop shadow as you go along*

Copy and paste Frame #5
Take your magic wand and click inside, expand by 30,
paste paper #13, invert and delete and move below the frame.
Copy and paste your tube,
duplicate and bring to the top and erase any excess over the frame.
Apply the Xero Filter Porcelain first to both tubes, then Clarity and then Mistifier
Paste leaf #3 and move to the bottom layer and to the left side, then duplicate and mirror.
Copy and paste leaf #4 and move to the bottom just above leaf #3 layer and move to the center more.

Being on the top layer again, resize the dready bear to 50% and place on the right. 
Resize the gourd basket to 70% and place on the right side in front of the bear.
Resize the camera to 50% and move below the bear layer  and place where you like the looks of it.
Resize the heart dangle to 50%, mirror and place on the left side on the frame.
Resize the lock to 30%, free rotate to the left, 25%
Resize the key to 40% and place by the lock.
Resize bow #1 to 75%, mirror and place below the basket layer.
Resize mushroom #1 to 50% and place below the bow layer on the left.
Copy and paste the sparkle swirl on the top layer, change the blend mode to Luminance(L) and lower the opacity to 70.
Resize the wordart Steampunk to 70%, then select all, float, defloat, expand by 2, add a new raster layer and fill with
color #bb6833, add noise at 50%, then move below the wordart, add a medium gradient and then a drop shadow.
I then typed out Memories and place to the right a bit on the Steampunk wordart.
Resize bow #4 to 80% and place behind the tube at the top.
This tube also came with 2 cute steampunk kittens that I added to the tag also.
Once happy with everything, if you used a background color, close that off and merge visible.
Resize your tag now and add your Copyrights and name and you are done.
Hope you enjoyed doing this tut.

 

She's a Demon FTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Danny Lee.
The tube is called Dark Demon. 

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap by Digicats (& Dogs)
Because of Night HERE
Xero Filter-Radiance, Soft Mood, Sparkles
Toadies Filter-Weaver
AAA Frames-Foto Frame
Font Galathea

Drop Shadow usually V2 H2 50 5

Let's get started
 

 Open a new image, 600 x 250
*Remember to add your drop shadow of choice as you go along.*

Copy and paste paper #7 and apply Toadies Filter-Weaver
with all the numbers set at 255, or play around with the numbers and get what you like.

Copy and paste Mesh 01, change the blend mode to screen and sharpen twice.

Apply Mesh 04, sharpen and add your drop shadow.

Resize the brothers to 50% and change blend mode to overlay.

Resize the gravestone to 70%, place on the right, blend mode, hard light, duplicate and mirror.

Resize the moon to 50% and place on the left and up and change the blend mode to Luminance(L)

Apply the mist, change the blend mode to screen and move down a little.

Paste gate 01 and move down and change the blend mode to hard light.
Resize coffin 01 to 50%, free rotate to the right 90 and move to the right behind the gate.

Apply the dead bush twice and place how you like them, change blend mode to Luminance (L), sharpen twice.

Add your tube and resize if needed and place on the left side.
Duplicate, guassian blur at 4, blend mode hard light.

Resize the crow to 25%, blend mode to Luminance(L),
apply Xero Filter- Radiance, place where you like.

Duplicate your tube, mirror, change the blend mode to overlay, move down below the brothers layer, to the right and apply Xero Filter-Soft Mood.  Lower the opacity if needed.
Close off your top tube and merge visible.
Add Xero Filter-Sparkles
Highlight and Anti-alias checked
Sparkle Style-Cross 1
Uniform
255, 1000, 125, 10
Reopen your tube now.
Merge visible and apply AAA Frames-Foto Frame, width 7.
Add your Copyrights and name and that's it.

If you want an Avator
Open a new image 150 x 150
Copy and paste your finish tag, resize to 75%, all layers
unchecked. Place where you would like and then merge visible and add the AAA Frames-Foto Frame as before.
Add your copyright and initial or name and all done.
Hope you enjoyed doing this tut.

 

Devilishly Sexy FTU

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Amberly Berendson.

You need a license to use this art work. Please do not use without a license.

You can find her art at MTA HERE

Supplies Needed

I used PSPX...but any of them should work.
Template #62 by Millie HERE

Scrap by kittzkreationz, Gothic Halloween HERE
Mask 3 by Stef  HERE
PhotoEffex-Scanlines
Nirvana Filter-Sinfinity
Greg Factory Output Vol II, Pool Shadow
Xero Filter-Radiance
EyeCandy4000-Gradient Glow
Font, Simply Glamorous

Drop Shadow usually V2 H2 50 5

Let's get started

Open the template and duplicate, close the original.
Delete the credits and the star layer #10.
Image, canvas size and make a size you are use to working with.
I made mine 800 x 800, will resize later.
Add your drop shadow as you go along.

Being on the bottom layer, fill with a color of choice or paste a paper of choice and apply your mask, delete and merge.

I merged the 2 wordart into one layer, and moved it down some.

Select layer 1 of the template, select, float, defloat and paste paper #8, invert and delete.

Select layer 2 of template and apply Greg Factory Output Vol II, Pool Shadow with these settings
40, 88, 142, 83, 75, 141, 169, 128
or play around and find the settings you like.
Apply a texture also.
Apply a gradient glow, medium setting.
Paste the gothic swirl on this layer also.
Paste the lights  to layer 2 and erase the bit at the top left.

Select layer 3 of the template, paste paper #8, invert and delete.
Select layer 5, apply PhotoEffex-Scanlines twice with the width set on 2 and the noise at 100.
Mirror your tube and paste, invert and delete.
Change the blend mode to Luminance(L) and apply the xero filter-Radiance.
Take your magic wand and click on the white area and add noise at 100%.

Select layer 6 of the template and apply the filter Nirvana-Sinfinity with these settings
52, 34, 205, 12, 65, 170, 0, 0
Add the same gradient glow.

Apply your tube, duplicate, gaussian blur 4, change blend mode to soft light and merge down.
Resize the horned pumpkin to 35% and place on the right side.
Resize the lil devil to 35%, free rotate to the left at 25%
The stars on the template, add noise at 100%.
Add the star ribbon and move below your tube layer.

I applied the curled ribbon and move below layer 6 and place one to the right, then duplicated and mirror and place on the left.
Once happy with everything, merge visible and resize.
Add your copyright and name and that's it.
Hope you enjoyed doing this tut.


 

Sea Life 1 PTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Ismael Rac.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store Xeracx  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap *Day on the Ocean* by

Sarah at Wicked Little Cupcake Designs HERE
WSL_Mask 84 HERE
Horseplay Pasture Template 150 HERE
Mura Meister Filter-Clouds
Oliver's Filter-Toile d' Araignee
(can do a search for this)

Font Simply Glamorous 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open the template and duplicate and close the original.
Delete the copyright
I went to Image, canvas size and changed mine to
800 x 800
I like alot of room to work, can alway resize later.

Type out the wordart of choice, I typed sea life using Impact that comes with psp and size was 175, color #65afbe  then use your pick tool to adjust if needed.
Select the wordart, expand by 3, new raster layer, fill with white, move below the color wordart and add noise at 50% and your drop shadow.
Apply Oliver's Filter-Toile d' Araignee with the intensity at 40.
Copy and paste the sand below the wordart.
Merge the 2 bottom squares into one layer, then select, float, defloat, new raster layer, fill with #65afbe,
or color of choice. Apply Oliver's Filter-Toile d' Araignee with the intensity at 40.
Select the lines, float, defloat, new raster layer and fill with #65afbe, add noise at 50% 
Select the rectangle and paste paper #4, invert and delete.
Take paper #6, apply Mura Meister clouds with a color from your tube for the bottom color and the other 2 top ones on white.
Select the circle layer, paste the paper, invert and delete.
Copy and paste paper #6 again, invert and delete and change the blend mode to soft light.
Resize sea plant to 50%, place on the right, duplicate and mirror and move up some.
Resize the sea grass to 45% and place at the bottom of the circle, with the thickest part in the center at bottom.
Then select the circle, float, defloat, invert and delete the grass that is showing below the circle part, select none.
Duplicate the sea grass and mirror and place to your liking.
Resize starfish to 30% and place on the wordart, duplicate and place again.
Resize seagull , one at 40% and one at 35%, place toward the top right side of the tag.
Resize the fish to 15% and duplicate 2 more times and place where you like the looks of them.
Change the opacity to 85%.
Resize the dolphin to 25% and lower the opacity to around 60%.
Resize button #2 to 25% and place on the right side.
Resize the anchor to 25%, mirror and change the color to #65afbe,
and move until it is below the circle layer.
Now paste your tube and place on the wordart where you want. Add your drop shadow.
Happy with everything, then merge visible and resize.
Add your copyright and name and you are done.
Hope you enjoyed doing this tut.

 

BCA Forum Set FTU

 

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Michi Art.

You need a license to use this art work. Please do not use without a license.

You can find this art at Michi Store HERE

Supplies Needed

I used PSPX...but any of them should work.
 

Scrap Cancer kit by Dreamland Designs HERE
Xero Filter-Clarity and Porcelain
EyeCandy4000-Gradient Glow
dsb flux- bright noise,
Font Whispers1 

Drop Shadow usually V2 H2 50 5

Let's get started

Open a new image 600 x 250
Remember to add your drop shadow as you go along.

Resize paper #8 to 90 and paste and adjust.
Copy and paste the triple frame, resize to 65%,
click anywhere on your image outside the frame area with your magic wand, paste paper #12 and invert and delete.
Do not deselect yet, resize your tube if needed and paste on one side, hit the delete key on your keyboard, select none and duplicate your tube and mirror to the other side in frame.
Merge these 2 tubes together, duplicate, gaussian blur at 4, change blend mode to soft light. Erase any part that is showing in the center frame.
Add xero filter, Porcelain.
Give the frame a medium gradient glow at
3, 25, 100
Copy and paste your tube and place in the center, resize if needed.
Resize the BC dreamland ribbon to 50% and place on the upper left of your tag.
Resize tag 4 to 15%, mirror and place under the ribbon layer and erase some of the string.
Resize the pink diamonds 2 to 50% and free rotate either direction at 90, place on the black frame at the top and erase the part that you don't want, then sharpen.
Now duplicate, mirror, duplicate flip, duplicate mirror and move below your tube layer.
The bottom ones you will need to erase a bit off the buttons on bottom.
Once happy, merge visible
Now select all, new raster layer, fill with black, contract by 2, delete and merge again.
Apply the xero filter-Clarity
Add your copyright and name and you are done with this part.

Now for the Avator

Open a 150 x 150
Copy and paste your finish tag and resize to 70% and move to where you can see some of the wordart at the top.
Apply the xero filter-Clarity to this also.
Merge visible, select all, new raster layer, fill with black, select none and merge visible.
Add your initial and copyright and that's it.

Hope you enjoyed doing this tut.