This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Bits N Bobs.
You need a license to use this art work. Please do not use without a license.
You can find her art HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Autumn Sunset by Bits N Bobs HERE
Fall Template by Melissaz Creationz HERE
Monti's Blind Mask HERE
EyeCandy 5 Impact-Chrome
or
EyeCandy4000-Chrome
Font akaDora for name
Scrap Autumn Sunset by Bits N Bobs HERE
Fall Template by Melissaz Creationz HERE
Monti's Blind Mask HERE
EyeCandy 5 Impact-Chrome
or
EyeCandy4000-Chrome
Font akaDora for name
Drop Shadow usually V2 H2 50 black
Let's get started
*Remember to add your drop shadow as you go along*
Open your template, hold the shift key and hit the d key to duplicate and close the original, delete the credits.
I deleted the top wordart part also.
Go to Image, canvas size and make it 800 x 800 or one you are use to using, I like a big work area.
Paste paper BNB-ASP3, resize to 75% and apply your mask, delete and merge group, move this layer below the template layer.
Resize each paper layer to 75% before pasting.
Merge copy of raster 5 with raster 5 of the template, select all, float, defloat, paste paper BNB-ASP12, invert and delete, also delete the template layer.
Merge copy of raster 4 down with raster 4, select, resize and paste paper BNB-ASP2, invert and delete.
Resize and paste paper BNB-ASP15, you just want the orange part showing, invert and delete.
Raster 2, apply either EyeCandy 5 Impact-Chrome
with these settings
Reflective Map-Indoor Office Space
7.66, 64, 22.33, 0
inside selections marked.
or EyeCandy4000-Chrome, play around to get what you like.
On all the raster 7s and copies of raster 7, the leaves, go to Adjust, Hue and Saturation, colorize with these settings
Hue 14, Saturation 255
Paste BNB-AS79, erase the top and right side frames, resize to 90%, go to Image, Rotate, free rotate to the right at 12 and place on the bottom frame, duplicate and mirror and place on the upper frame.
Take your magic wand, click inside, expand by 2, paste paper BNB-ASP3, adjust to get the leaves showing from the paper, invert and delete.
Delete raste 6 of the template.
The top layer wordart, i Live for Fall, go to Adjust, Hue and Saturation, colorize and use these settings
Hue 14, Saturation 255.
Paste BNB-AS76 on the upper left top, just above your mask layer and adjust. Paste BNB-AS7 on the orange circle at the top left. Paste BNB-AS9, resize to 75% and rotate to the right about 20 degrees and place on the chrome frame part.
Paste BNB-AS40 and place on the right side just above the mask layer.
Paste BNB-AS72 below the wordart layer and adjust.
Resize BNB-AS31 to 45%, place below the string layer on the right.
Resize and paste your tube on the left side of the tag.
Resize BNB-AS56 to 25%, duplicate and place one on the upper left side and the other on the lower part of the frame on the right side.
Resize BNB-AS21 to 25%, angle it a bit more, duplicate as many times as you like and place where you prefer.
Paste BNB-AS39 just above the mask layer and move where you like.
Add any other elements that you would like.
Do not merge the tag yet, you will be using it for the signature tag and avator.
Once you have made the signature tag and avator,
merge visible, resize your tag and add all copyrights
Add your name and that is it.
Now for the Signature tag
Open a new layer, 600 by 250, resize paper BNB-ASP3 to 75% and paste.
Back on your tag, close your tube layer and the wordart layer and copy and paste. Back to the tag again and open your tube layer and paste to the left. Back to tag, get the wordart and paste and resize to your liking and move to the right more.
Paste the butterfly a couple of time and place where you like.
Merge visible and add AAAFrames-Foto Frame with these settings,
Width 5, Matte 2, Opacity at 50.
For the Avator, do a size that is allowed for your forums, I opened a new layer of 200 x 200, paste paper BNB-ASP3 first, then paste your tag without the tube layer, resize to 85% and move to the left until the wordart is centered.
Apply the same AAAFrames-Foto Frame setting as before.
Be sure to add all copyrights to all your tag pieces.
Hope you enjoyed doing this tut.
Open your template, hold the shift key and hit the d key to duplicate and close the original, delete the credits.
I deleted the top wordart part also.
Go to Image, canvas size and make it 800 x 800 or one you are use to using, I like a big work area.
Paste paper BNB-ASP3, resize to 75% and apply your mask, delete and merge group, move this layer below the template layer.
Resize each paper layer to 75% before pasting.
Merge copy of raster 5 with raster 5 of the template, select all, float, defloat, paste paper BNB-ASP12, invert and delete, also delete the template layer.
Merge copy of raster 4 down with raster 4, select, resize and paste paper BNB-ASP2, invert and delete.
Resize and paste paper BNB-ASP15, you just want the orange part showing, invert and delete.
Raster 2, apply either EyeCandy 5 Impact-Chrome
with these settings
Reflective Map-Indoor Office Space
7.66, 64, 22.33, 0
inside selections marked.
or EyeCandy4000-Chrome, play around to get what you like.
On all the raster 7s and copies of raster 7, the leaves, go to Adjust, Hue and Saturation, colorize with these settings
Hue 14, Saturation 255
Paste BNB-AS79, erase the top and right side frames, resize to 90%, go to Image, Rotate, free rotate to the right at 12 and place on the bottom frame, duplicate and mirror and place on the upper frame.
Take your magic wand, click inside, expand by 2, paste paper BNB-ASP3, adjust to get the leaves showing from the paper, invert and delete.
Delete raste 6 of the template.
The top layer wordart, i Live for Fall, go to Adjust, Hue and Saturation, colorize and use these settings
Hue 14, Saturation 255.
Paste BNB-AS76 on the upper left top, just above your mask layer and adjust. Paste BNB-AS7 on the orange circle at the top left. Paste BNB-AS9, resize to 75% and rotate to the right about 20 degrees and place on the chrome frame part.
Paste BNB-AS40 and place on the right side just above the mask layer.
Paste BNB-AS72 below the wordart layer and adjust.
Resize BNB-AS31 to 45%, place below the string layer on the right.
Resize and paste your tube on the left side of the tag.
Resize BNB-AS56 to 25%, duplicate and place one on the upper left side and the other on the lower part of the frame on the right side.
Resize BNB-AS21 to 25%, angle it a bit more, duplicate as many times as you like and place where you prefer.
Paste BNB-AS39 just above the mask layer and move where you like.
Add any other elements that you would like.
Do not merge the tag yet, you will be using it for the signature tag and avator.
Once you have made the signature tag and avator,
merge visible, resize your tag and add all copyrights
Add your name and that is it.
Now for the Signature tag
Open a new layer, 600 by 250, resize paper BNB-ASP3 to 75% and paste.
Back on your tag, close your tube layer and the wordart layer and copy and paste. Back to the tag again and open your tube layer and paste to the left. Back to tag, get the wordart and paste and resize to your liking and move to the right more.
Paste the butterfly a couple of time and place where you like.
Merge visible and add AAAFrames-Foto Frame with these settings,
Width 5, Matte 2, Opacity at 50.
For the Avator, do a size that is allowed for your forums, I opened a new layer of 200 x 200, paste paper BNB-ASP3 first, then paste your tag without the tube layer, resize to 85% and move to the left until the wordart is centered.
Apply the same AAAFrames-Foto Frame setting as before.
Be sure to add all copyrights to all your tag pieces.
Hope you enjoyed doing this tut.
No comments:
Post a Comment