Steampunk Girl PTU

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Steampunk Girl by SassiDesigns HERE
Xero Filter- Radiance
Mura Meister-Copies-Encircle
Unplugged Tools-Interlace
WSL_208 Mask HERE
Font Time to get a Watch 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later, I like room to work.

Paste paper #12 and apply your mask, delete and merge group.

Resize frame 9 and 11 to 75%, paste frame 11 first then frame 9, take your magic wand, click inside, expand by 2, paste paper 12, invert and delete.
Do not deselect yet, copy your closeup tube, hit the delete key on your keyboard, select none.
Apply the Xero Filter-Radiance to your closeup. Then apply Unplugged Tools-Interlace with these settings, twice
10, 25, 1, 0

Resize element 34 to 40%, apply Mura Meister-Copies-Encircle and paste below the paper layer of the frame.

Resize element 4 to 55% and apply Mura Meister-Copies-Encircle, move just above the mask layer.

Being on the top layer, resize your tube to 85%, if using the same one I am, paste on the left side.

Resize element 7 to 55% and place at the bottom part of the tag, behind your tube layer.

Resize element 47 to 50% and place at the bottom of the frame.

Resize element 71 to 40% and place at the bottom below the glasses and over to the left, duplicate and move it up and over to the left more.

Paste element 38 just above the mask layer, on the upper right side, duplicate and mirror.

Resize element 86 to 50% and place on the lower right side.

Resize element 60 to 40% and place on the upper right side of the frame.

Resize element 2 to 20%, place on the upper left side by the tube, sharpen once.

Resize element 59 to 40%, place at the bottom below the glasses on the right side.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Be sure to add all copyrights and your name.

Hope you enjoyed doing this tut.

Autumn Indulgence PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  VeryMany.

You need a license to use this art work. Please do not use without a license.

You can find this art at SATC HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Autumn Indulgence  HERE
By HorsePlay's Pasture Designs
Template 18 by Dee  HERE
Mask 0172 by Simone  HERE
Font Coneria Script 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d on your keyboard to duplicate and close the original.
Delete the credits.

Paste paper #8 on the bottom layer, apply your mask, delete and merge group. Take your pick tool to stretch it out to how you like it.

Select the brownish rectangle, paste paper AI-p2, invert and delete, also delete the temp layer.

Select the yellow left rectangle, paste paper AI-p12, place where you like it, invert and delete, do not deselect yet.
Resize your tube to 85%, if using the same one I am, mirror, duplicate and paste, hit delete on the bottom tube, and select none. Now on the top tube, move above the left white frame, green circle and dotted frame and erase any part you do not want showing.

Select the Green Circle, paste paper AI-p8, invert and delete, then paste paper AI-p4, place how you like it, delete, select none.
Change the blend mode to burn and lower the opacity to 85.

Resize AI-E13 to 75% and place on the circle and take your Pick took and pull it until it fits the circle.
Take your Change to target Brush and color it with this color #5a1b10.

Resize AI-E32 to 55% and place on the left side above your tube layer, duplicate and mirror. Rotate the one on the left to 20 degree left.

Paste AI-E59 below the second tube layer and move over and up to your liking, duplicate, mirror, move down and out to your liking.

Paste AI-E33 and resize to 50%, place below the leaves of the template and down some, duplicate and mirror.

Resize AI-E46 to 80%, paste below your tube layer at the top, duplicate and flip.

Resize AI-E4 to 40% and place on the upper right side of your tag.

Resize AI-E58 to 35%, being on the top layer, paste on the right side, duplicate, free rotate to the left at 45 degrees and move to the left side, below the leaves layer.

Paste AI-E36 behind your tube layer on the left and move up just a bit, if the stem is showing at the bottom, just erase that part.

Resize AI-E52 to 75% and place on the left behind your tube, duplicate and mirror and adjust to your liking.

Be sure to go back and adjust your mask to show more, using your Pick tool.

Add any other elements that you would like, once happy close off any background used and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Add all copyrights and your name.

Hope you enjoyed doing this tut.

Feel Your Boobies FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap BCA by Topcats Tagz HERE
Template bc-4 by Tamie HERE
PhotoEffex-Scanlines
Xero Filter- Mistifier
EyeCandy4000-Gradient Glow
WSL_84 Mask  HERE
Font Simply Glamorous 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d on your keyboard to duplicate and close the original.
Delete the credits.

Paste paper #22 and apply your mask, delete and merge group.

Select raster 5 of the template, select, float, defloat, paste paper of choice, I used paper #5, invert and delete.
Delete the template layer also.

Select raster 6, paste paper #18, invert and delete, paste element #28 and adjust to the circle.

Select raster 4, apply PhotoEffex-Scanlines
Width at 1 and noise at 25.

Select raster 3 and paste paper #4, invert and delete.

Select raster #2, paste paper #2, invert and delete.

Click on raster 1 of the template the white square, select all, float, defloat, paste your middle closeup tube and adjust so the boobs are the center of attention, invert and delete.
Apply Xero Filter-Mistifier, twice to the tube layer.

Select raster 7 and add noise at 50%. Add a medium white glow to the frame, using EyeCandy4000-Gradient Glow.

On both of the white backgrounds to the wordart, apply noise at 50%.

On the wordart Feel Your, go to Effects, Texture effects, Weave and apply with these settings
1, 5, 1, color white on both and fill gaps checked.
Merge your wordart down to the white background on each one and then move over to the right more.

Resize and paste your tube and place on the left side.

Paste element #13 below your tube layer.

Paste element #48 and place on the upper right side of your tag.

Paste element #57, move to the bottom layer and over to the left, duplicate and move down to the right side.

Resize element #18 to 75%, then free rotate to the left at 20 degrees and place on your tube at the bottom part.

Resize element #19 to 75% and place by the compact.

Paste element #40, place on the right side how you like it, then erase the extra parts you do not want showing, duplicate a couple of times and place where you like.

Resize element #31 to 40% and place by the wordart on the right side, duplicate, mirror and place where you like.

Add any other elements that you would like, once happy, close off any background and merge visible.

Resize your tag before you add your copyrights to make sure they can be read easily.

Be sure to add all copyrights and your name.

Hope you enjoyed doing this tut.

Autumn Cutie 3 Piece Set FTU

 

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Zindy Nielsen.

You need a license to use this art work. Please do not use without a license.

You can find her art at her Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Fall Ball by Topcats Tagz  HERE
This is part of a blog train
Xero Filter- Mistifier
Mask 0172 by Sophisticat Simone HERE
Font Great Vibes 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper #7 first, apply your mask, delete and merge group.
Paste paper #6 next, apply your mask again and delete and merge group, mirror and move over to the right just a bit and merge down.

Paste element #14, resize to 85% and move to the top, duplicate, flip and mirror. Duplicate, free rotate to the right, duplicate and mirror, close off your mask layer and merge visible.

Paste your closeup and adjust to your liking, erase any showing outside the frame area. Apply the Xero filter-Mistifier.

Paste your tube and place on the left side.

Paste element #28 on the right side and move toward the top,  duplicate and move down more.
Duplicate and mirror, duplicate and free rotate to the left at 90 degrees and place under your tube.

Paste element #54, free rotate to the left at 45 degrees and place between the flowers on the right.

Paste element #16 on the right side from your tube.

Resize element #29 to 50% and place on the right side.

Resize element #15 to 40% and place under your tube by the knees. Duplicate a couple more times and place how you like them, moving below some of the flowers etc.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add your name and all copyrights to your tags.


SIGNATURE TAG

Open a new image 600 x 250, paste paper #6 and crop your image.

Paste your closeup and move slightly to the right.

Resize to 80% and paste element #28 and move to the right side and up, duplicate and move down more.

Duplicate and mirror, duplicate again and free rotate to the left at 90 degrees.

Paste your tube and adjust to your liking.

Resize element #14 to 85% and place below your tube layer and place toward the bottom, duplicate and flip, making any adjustments needed.

Paste element #54, free rotate to the left 45 degrees and place between the flowers on the right.

Resize element #16 to 60% and being on the top layer, place on the right side.

Resize element #29 to 35%, mirror and place on the right side.

Merge visible and apply AAA Frames-Foto Frame
Width at, Opacity at 55, click on the little arrow at the bottom where it says default, and select the Transparent Orange color and then click ok.

AVATOR

Open a new image 200 x 200 or whatever your group or forum allows in size.

Paste your finish signature as a new layer, resize to 85%, mirror and adjust to your liking, merge visible and apply the same frame setting as before.

Be sure to add all copyrights and your name.

Hope you enjoyed doing this tut.

Witch Is In Forum Set FTU



This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Alfadesire.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Halloween #4 by Topcats Tagz HERE
AAAFrames-Foto Frame
EyeCandy4000-Gradient Glow and Glass
WSL_Mask 84 HERE
Font Witched 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 600 x 250, paste paper #3, crop your image.
Apply AAA Frames-Foto Frame, width at 10.

Resize element #49 to 50% and place on the right side of the background.

Resize element #11 to 50%, free rotate to the right at 15 degrees, click inside with your magic wand, expand by 4, resize paper #11 to 50% and paste, invert and delete, move below the frame layer, change the blend mode to Luminance (L).

(Do not deselect yet)

Resize your tube to 40%, if using the same one I am, mirror and paste into the frame on the right side more, delete, select none.
Change the blend mode to screen, duplicate and change that one to hard light.
Close the background off and merge all the other layers together, then reopen the background.

Paste your tube on the left side, resize to 80%.

Resize element #35 to 50% and place on the right side below the frame layer.
Paste elment #37 and lower it down to where you like the looks of it.

Resize element #47 to 25%, place behind the tube layer toward the top more, change the blend mode to Luminance (L).

Paste element #41, then take your target brush and change the color of the hat to this #6a2975, resize to 50% and place on the left side with the hat sitting on the fence pickets.

Resize element #34 to 25% and place on the tree on the right side, sharpen twice.

Resize element #20 to 45% and place below the tree layer and to the right a bit so you can see it, duplicate and move over and down a little bit. Change the blend mode on both to hard light.

Resize element #32 to 25% and sharpen a couple of times and place how you like it.

Merge visible, select all, add a new raster layer, fill with black or color of choice, contract by 2, delete, select none.

Add any other elements that you would like.

Add your name and copyright to your tag.

Do not merge yet, you will be closing off your name layer.

Avator
Open a new image the size that is allowed for your group or forum.
Mine is 200 x 200, copy your signature tag you just did, except close off your name part on it, paste and resize to 85%, mirror and adjust how you like, then merge visible.
Select all, new raster layer, fill with black, contract by 2, delete and merge.

On the name, I did select, add a new raster layer, expand by 2, filled with a lighter color and moved below.
Then apply EyeCandy4000-Glass to the top layer of the name.

Add your name and copyrights to both your tags.

Hope you enjoyed doing this tut.

Creatures of the Forest PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alfadesire.

You need a license to use this art work. Please do not use without a license.

You can find this art PFD HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap Enchanted Forest 
by SassiDesigns HERE
WSL_Mask 83 HERE
Font One Starry Night 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Resize your mask bigger to 125% and paste on paper #13, delete and merge group.

Resize element #65 to 65% and then free rotate to the right at 10 degrees. Click inside with your magic wand, expand by 5, paste paper #13, invert and delete, move below the frame layer.

Resize and paste your tube and move off center to the left.
Paste element #34 behind your tube layer.

Resize element #9 to 85%, mirror and place behind the tube on the left side.

Paste element #168, move below the frame layer on the left side, duplicate, move to the center and lower under your tube, duplicate again and move above the frame layer to the right.

Paste element #78 and place on the right side, just below the grass layer you just added. Duplicate, mirror and move just above the house on the left.

Resize element #40 to 70% and place on the right side, duplicate and mirror.

Resize element #92 to 50% and place on the right side below the pole figure and move it out just a bit.

Resize element #47 to 60% and place at the upper right on top of the frame.

Paste element #95 below the tube layer on the left side and adjust it on the house and tree.

Paste element #76 under your tube layer and move toward the bottom.

Add any other elements that you would like, once happy close off any background and merge visible.
Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

Witch is In FTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alfadesire.

You need a license to use this art work. Please do not use without a license.

You can find this art at PFD  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap  Halloween #4  by Topcats Tagz HERE
EyeCandy4000-Gradient Glow and Glass
WSL_Mask 84 HERE
Font Witched 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, can alway resize later.

Paste paper #3, apply your mask, delete and merge group.

Paste element #11, then go to Image, free rotate, rotate to the right by 15 degrees. Click inside with your magic wand, expand by 5, resize paper #15 to 75% and paste, invert and delete, move the paper below your frame layer, change the blend mode to soft light.

Paste element #6 and resize to 50%, place at the bottom left of the frame, duplicate, mirror and adjust, duplicate twice again and move to the center. You can readjust later after your tube and other elements are added.

Resize your tube to 65%, if using the same one I am, paste on the left side of the frame, duplicate, mirror, move below the paper layer in the frame and move to the right to your liking and erase the excess outside of the frame.

Paste element #20 behind your tube on the left, change the blend mode to Luminance (L) and free rotate to the left by 10 degrees.

Resize element #14 to 75%, place on the right side, then take your change to target brush and change the color of the hat to this color #a58cbc.

Paste element #13 and resize larger to 130% and place off center. Apply EyeCandy4000-Gradient Glow on the medium setting and color white, width at 3

Resize element #43 to 80%, duplicate and mirror and move both to the left side above the tube layer and place how you like them.

Paste element #26 below the hat layer and place how you like it.  Duplicate, resize to 70% and place above the word boo to the left.

Resize element #32 to 50% and place below the word boo in the center and move up a bit, sharpen and add your drop shadow twice.

Resize element #30 to 80% and place below the word boo.
Duplicate it, bring to the top and move to the right by the hat.

Resize element #47 to 40%, move below your tube layer and move toward the top left, change the blend mode to Luminance (L).

Paste element #49 on your mask layer and duplicate once.

Resize element #34 to 40% and place on the hat on the right side.

On the name, I did select, select all, float, defloat, add a new raster layer, expand by 2, fill with black and move below.
Then apply EyeCandy4000-Glass to the top layer of the name and move it over some so the black shows more.

Add any other elements that you would like, once happy close off any background and merge visible.

Resize your tag first and then add all copyrights to your tags.

Hope you enjoyed doing this tut.

Double Troubling PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ismael Rac.

You need a license to use this art work. Please do not use without a license.My license is for when he was with PTE which has now closed

You can find this art at his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Awesome Scrap kit Troubling Bubbling Brew PTU
by HorsePlay's Pasture Designs HERE
WSL-Mask 84 HERE
Font Witched 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper #8, apply your mask, delete and merge group.

Paste El43 and resize to 70%, click inside with your magic wand, expand by 3, paste paper #8, invert and delete, move below your frame layer, now mirror and paste your close up and move to the right side more, delete and now select none.
Change the blend mode to screen.

Paste El47 and resize to 75% and move to the right a bit on top of the frame layer.

Paste El68 on the left side of the frame.
Paste El74 behind the house layer and adjust to your liking.
Paste El38, resize to 50%, place behind the house on the left side and move up a bit, duplicate and mirror, adjust behind the house on the right side of it, then duplicate again and move over more to the right.

Paste El20, resize to 20%, duplicate and place on the right side at the bottom of the house.
Resize El5 to 40% and place on the right side also.
Duplicate El20 again and move to the right side of the pumpkin.

Resize El3 to 30% and place on the left side behind the tree layer and move up so it shows above the house.

Paste El87 and resize to 25%, move below the pumpkin layer on the right, duplicate, free rotate to the left at 90 degree and move over to the left more and move up a layer or so.
Resize El23 to 25% and place in front of the pumpkin.

Paste El19 and resize to 90% and place at the top on the top layer.

Paste El11 on the right side, being on the top layer.

Paste El12 just above the mask layer on the left side, duplicate and mirror.

Paste El36, duplicate a few time and place just above the fence layer how you like them.

Being on the top layer, paste your tube and move it to the left side.
Duplicate your tube, mirror and move down to just above your frame layer and adjust any elements that need adjusting and lower the opacity to 90%.

Paste El34 on the top layer and move toward the top more.

Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.