Tagalicious Tags & Tuts: January 2015

Saturday, January 31, 2015

Roses for Me PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Stella Felice7.

You need a license to use this art work. Please do not use without a license.

You can find this art at the PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Love U by Amy Marie
and you can purchase it at her Store HERE

WSL_ Mask 84 HERE

Font of Choice, I used Dragon is Coming

Let's get started

*Remember to add your drop shadow as you go along*
Drop shadow is usually V-2 H-2 Black, 50, 7

Open a new image 800 x 800

Paste paper 5, apply your mask, delete and merge group.
Paste element 38, free rotate to the left, duplicate, mirror and move over slightly, merge the frames together. Click inside with your magic wand, expand by 5, new layer and fill with #9e0407, select none.
Make sure you get the little corners filled also, move below the frame.

Being back on top, resize your tube to 22%, paste on the right side.

Resize element 45 to 50%, place below the tube layer and over to the left.

Paste element 10 below the flower layer and up just a bit.

Resize element 83 to 60%, place on the left by the feet of your tube.

Paste element 37 on the left and move up, duplicate, resize to 85%, and move down some.

Paste element 26 on the paper layer inside the frame, place how you like and erase any part outside the frame.

Paste element 66, place on the mask layer, duplicate a few times and place in different areas that you like the looks of.

Resize element 13 to 50%, place on the left just above the ribbon layer and over to the center a bit more.

Resize element 2 to 50%, place on the left side below the gift box.

Paste element 28, resize to 50%, free rotate to the right, place by the leg, erase the part of the stem over her foot.

Paste element 80 under your tube and just have the little hearts showing, there will be a little of the black showing but that is ok.
If you do not like it erase that part.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Friday, January 30, 2015

Diane Love PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Dixie Black.
This tube comes in many color layers and close ups for you to enjoy.

You need a license to use this art work. Please do not use without a license.

You can find this art at the PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Kit Love U By Amy Marie and you can get it HERE
Xero Filter-Porcelain and Soft Vignette

WSL_Mask 84 HERE

Font of Choice, I used Dragon is Coming

Drop shadow is usually V-2 H-2 Black, 50, 7

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Add a new raster layer, fill with a gradient that you make using two colors from your tube.
Angle 45, repeat at 3 and apply your mask.
Or if you prefer use one of the papers from the kit.

Paste element 39, free rotate to the right, then mirror.
Click inside with your magic wand, expand by 5, paste your tube, invert, delete, select none. Apply the xero filter Porcelain, then apply Soft Vignette,
Ellipitcal, Foreground colors leave as is,
changing the pattern type to Diagonal dots
0, 0, 0, 255
Paste your tube again, resize to 50% and place on the right side.
Paste element 25 on the left upper side of the frame, resize to 85%, duplicate and move down some., free rotate to the left at 15 degrees.

Paste element 11 on the tube layer to cover the edge of her legs.
Paste element 33, free rotate to the left at 90, place below the tube layer in the frame on the right side.
Paste element 66 on top of the ribbon layer at the bottom.
Paste element 2, resize to 50%, place off center to the left.
Paste element 81, resize to 50%, place on top of the heart.
Paste element 9, resize to 50%, place on the right side above the sparkle layer.
Paste element 16, resize to 75%, place on the left side above the ribbon layer.
Paste element 8, resize to 50%, free rotate to the right at 45 degrees, place below the shoe layer.
Paste element 41 just above the mask layer and over to the left a bit.

Paste element 59 above the netted heart layer, place how you like and duplicate and move over to the other side, erasing parts you do not want to show.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Forever Love PTU

This tut was written for those with a basic knowledge of psp.

I am using an Awesome Scrap kit by Scrapz n Pleasure

You can find her kits at Mystical Scraps HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Valentina, you can purchase HERE
You can check out her blog HERE
RR Set Mask_2-1 HERE
EyeCandy 4000 Gardient Glow

Xero Filter-Mistifier

Font of Choice, I used Shipped Goods 1

Drop shadow is usually V-2 H-2 Black, 50, 7

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 6, apply your mask, delete and merge group.

Paste element 08 resize to 95%, duplicate, mirror, adjust, then merge down and resize again to 95%.

Paste your tube and resize.
If using the same tube I am, I resized mine to 35%.

Paste element 47, resize to 20% and place on the right side of your tube.

Resize element 24 to 55%, place under your tube layer, duplicate, mirror.

Resize the wordart forever to 60%, paste above the flower layers, then move the flowers how you like them.

Resize element 39 to 40%, place on the right side below the wordart.

Paste element 31, resize to 30%, paste on the left side above the wordart.

Resize element 10 to 85%, place on the mask layer, duplicate, mirror, adjust so they are showing behind your tube.

Resize element 30 to 20%, place above the cup layer and over the cup to look like it is bubbles coming from the cup. Drop shadow with white first
H2 V2 then H-2 V-2 color white.
Then change it to black and repeat.
Then sharpen twice.

Paste element 49 below the flower layers on the left, duplicate, mirror.

Resize element 25 to 25% and paste on the curtain layer where you like, duplicate, mirror and place up a bit higher.

Resize element 09 to 45%, place on the right side below the flower layers.

Resize element 40 to 45%, free rotate to the right at 90, place at the top on the curtain on one side, duplicate and mirror.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Amy Girl PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Dixie Black aka Swan Scraps
This tube comes in many color layers and close up for you to enjoy.
Can be used in so many different ways, comes with a knitted hat also.

You need a license to use this art work. Please do not use without a license.

You can find this art at the PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Kit Quinn By Amy Marie and you can get it HERE

RR Set Mask_2-1 HERE

Font of Choice, MfQueen Leela

Drop shadow is usually V-2 H-2 Black, 50, 7

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste paper 11, resize to 90%, apply your mask, invert, delete.
Paste frame 7, click inside with your magic wand, expand by 5, paste paper 14, invert, delete, select none and move below the frame.
Resize frame 91 to 93% and paste on top of the first frame.

Paste element 8 at the bottom part of the frame, move over some, duplicate and mirror.
Resize your tube as needed, paste on the right side.
If using the same tube I am, I resized mine to 70%.

Resize element 80 to 70%, place on the left side below the leaves layer.

Paste element 30, mirror and move below your tube layer on the right.
Paste element 65 on the right side below the rose layer, duplicate, free rotate to the left at 90.

Paste element 39, free rotate to the left at 90, place below the rose layer on the right, erase any of the stem showing below the tube.

Paste element 9, resize to 70%, place on the left below the gift box, duplicate, mirror and adjust on the right side.

Resize element 15 to 80%, free rotate to the left at 40%, place on the upper right side below the leave layer, duplicate and move down some, erasing some of the stem at the bottom.

Resize element 97 to 50%, place on the left below your tube layer, and move the gift box over a bit more to the left.

Resize element 95 to 50%, place below the gift box layer on the left.
Resize element 93 to 75%, paste below the bear layer on the left and adjust to your liking.

Paste element 25 below the tube layer, free rotate to the right at 90 and place by the feet at the bottom of the tube, erase any string showing on the right side.

Paste element 68 sparkle on the upper left side of the frames below your tube layer.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Maggie Love PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Dixie Black aka Swan Scraps
This tube comes in 7 color layers and close up for you to enjoy, along with a bear and bunny.

You need a license to use this art work. Please do not use without a license.

You can find this art at the PFD Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Kit By Honored Scraps and you can get it HERE

RR Set Mask_2-1 HERE

Font of Choice, MfQueen Leela

Drop shadow is usually V-2 H-2 Black, 50, 7

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste paper 06, resize to 85%, apply your mask, invert, delete.

Paste element 29, click inside with your magic wand, expand by 15, paste paper 08, invert, delete.
Paste element 44 below the paper layer and adjust to your liking.
Paste element 13, below this layer, move to one side, duplicate and mirror.

Resize and paste your tube on the top layer. If using the same tube as I am, I resized mine to 55%.
I used the bunny also.

Paste element 21 under your tube, move to one side more, duplicate and move to the other side a bit more.

Resize element 02 to 50%, place on the right side below your tube layer.

Resize element 10 to 40% and place on the right by your tube.

Resize element 35 to 30% and place below the bunny layer on the left, duplicate, mirror and place below the candy box on the right.

Resize element 49 to 75%, place below the heart layer.
Paste element 17 below this layer and erase any part outside the heart.

Paste element 60, paste above the swirls, duplicate, mirror, moving one up a bit higher than the other one.

Paste element 28 above the mask layer, move up and how you like and erase any part you do not want.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Thursday, January 29, 2015

Just Be Goth PTU

This tut was written for those with a basic knowledge of psp.

I am using an Awesome Scrap kit by Bella Carbeña

You can find her kits at Mystical Scraps HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Gothic Lover, you can purchase HERE
You can check out her blog HERE
RR Set Mask_2-1 HERE
EyeCandy 4000 Gardient Glow

Xero Filter-Mistifier

Font of Choice, I used Shipped Goods 1

Drop shadow is usually V-2 H-2 Black, 50, 7

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste frame 73, click inside with your magic wand, expand by 5, paste paper 4, invert, delete, mirror first, then paste the poser, delete and select none.
Change the blend mode to soft light.
Apply the Xero Filter-Mistifier to the poser with these settings
200, 200, 255, 255, 255

Paste paper 2, apply your mask, delete and merge group.

Resize element 77 to 85%, place on one side, duplicate, mirror.
Resize element 30 to 65%, place on one side below element 77, duplicate, mirror.
Being back on the top layer, paste one of the Posers you prefer and place on the left side.
Paste element 69 on top of your Poser and add a thin gradient glow with the color white.

Paste element 02 just above the mask layer on the right, adjust, then erase any of the lawn part you do not want showing, duplicate, mirror and move down a bit.

Resize element 91 to 80%, place on the right side below the wordart layer.

Resize element 43 to 35%, place on the left by the poser.

Resize element 16 to 45%, place above the frame layer, place how you like on one side, then duplicate and mirror and move to your liking again. Duplicate both again and move to the outer part on each side.

Paste element 58 just above the mask layer and move to the top of the frame and off center a bit.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

All My Heart PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Tony Tzanoukakis.

You need a license to use this art work. Please do not use without a license.

You can find this art at the his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap All My Heart by Amy Marie
and you can purchase it at her Store HERE

RR Set Mask_2-1 HERE

Xero Filter-Mistifier and Soft Vignette

Font of Choice, I used One Starry Night

(Drop shadow for this tag was V-2 H-3 Black, 30, 7)

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 21, apply your mask, delete and merge group.

Select your mask, float, defloat, paste your tube, invert, delete, select none.
Change the blend mode to Screen, apply the Xero Filter-Mistifier, change the haziness to 145, then apply
Soft Vignette, change the pattern type to Diagonal dots and repeats 1.
then merge down with your mask.

Paste your tube and resize to 45% and place more to the right.

Paste element 41 on the left side, overlapping your tube.
Paste element 32 below your tube layer and move over to the left some.

Paste element 53, mirror, resize to 75%, having it below your tube layer.
Paste element 45 under your tube layer and move toward the right a bit.

Resize element 49 to 70%, place on the left side below the wordart, duplicate, move down and over to the right behind your tube.

Paste element 36 below the heart layer on the left at the top.

Resize element 42 to 75%, place behind your tube and up some, duplicate, mirror, move below the wordart layer and place by the heart, duplicate again and move down more.

Resize element 30 to 20%, free rotate to the right at 30, place at the top, duplicate mirror and move back over to the left.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

I Love You 2 PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Tony Tzanoukakis.

You need a license to use this art work. Please do not use without a license.

You can find this art at the his Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Antoinne by Amy Marie
and you can purchase it at her Store HERE

RR Set Mask_2-1 HERE

Xero Filter-Soft Mood

Font of Choice, I used Fiolex Girls

Drop shadow is usually V-2 H-2 Black, 50, 7

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 16, apply your mask, delete and merge group.

Paste frame 42, resize to 85%, duplicate, change the blend mode to hard light, merge down.
Click inside with your magic wand, expand by 5, paste paper of choice, I used paper 19, invert, delete, select none.

Resize element 29 to 50%, place on the place layer and change the blend mode to Luminance (L) and move to the right a bit.

Paste element 16 on the frame at the bottom.

Paste your tube on top of the frame layer, resize to 85% and place how you prefer.

Paste your original tube below the heart layer, adjust how you like, lower the opacity to 30, then apply the Xero Filter-Soft Mood

Paste element 60 on the left side of the tube on top, resize it to 55%, mirror and move back by the shoes.
Paste element 27 below the sparkle layer.
Resize element 9 to 50%, place off to the right of the candy box.

Paste element 50 on your mask layer on the right, duplicate, mirror, flip and adjust both to your liking.
Paste element 39 on the mask layer in the upper left side, duplicate, flip and move over to the right side bottom.

Resize element 26 to 80%, place on the right side just above the frame layer, duplicate and mirror and move this one up just a bit more.

Place sparkle element 72 on the heart in the frame, place how you like and then erase the part outside the heart area.
Resize element 52 to 40%, place on the right side below the sparkle layer.
Paste element 62 below the paper layer of the frame and move up and how you like, then erase any part you don't want, duplicate a couple of times, flip, position, erase some, duplicate again, flip and adjust.

Then I pasted element 66, free rotate to the right at 90, placed above the heart trellis on the right and adjusted how I liked, erased some, duplicate, mirror, adjusted and erase a little more.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

She's Beautiful PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Spazz.

You need a license to use this art work. Please do not use without a license.

You can find this art at the Spazzd Art Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Shabby Perfection by Mellie Beans
and you can purchase it at the Spazz Store HERE
Check out Mellie's blog HERE

RR Set Mask_2-1 HERE

Xero Filter-Porcelain and Soft Vignette
Mura Meister Copies-Encircle

Font of Choice, I used Mf Queen Leela

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 3, apply your mask, delete and merge group, duplicate and merge down.
Paste frame e44 and resize to 70%, click inside with your magic wand, expand by 5, paste paper 9, resize your tube to what you want, then paste your tube, delete and select none.
Move both the paper and the tube below the frame layer.

Apply the Xero Filter-Porcelain to your tube, then Soft Vignette, set on
Ellipitcal, Foreground color
Diagonal Dots

Paste your tube, resize to 20% and place on the left side.

Paste e52 just above the mask layers, change the blend mode to overlay.
Resize e14 to 85%, place on one side below the mask layer, duplicate and mirror.

Resize e04 to 70%, erase the stem area, then apply Mura Meister Copies-Encircle,
move below the paper layer of the frame. Then take your Pick tool and pull out to as large as you like behind the frame, then sharpen once.

Resize e50 to 55%, place under your tube layer, duplicate, mirror and adjust.

Resize e38 to 40%, place below the flower layer on one side, duplicate, mirror, duplicate again and move back to the center more.
Resize e34 to 50%, place on the right side, below the leaf layers.
Resize e10 to 50%, place on the left side below the leaf layer.
Resize e05 to 40%, place on the right side below the leaf layers also.

Resize e04 to 60%, flip, move to the bottom layer and bottom of tag showing past the leaf layers, duplicate and mirror.

Resize e25 to 90%, place at the bottom of your tag, refer to my tag for placement.

Resize e29 to 50%, placing on the right side below the flower ring you made.

Resize e22 to 40%, place on the bicycle wheel on the right, duplicate a couple of times and place where you like, mirror one of them.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

I LOVE You PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Jennifer Janesko.

You need a license to use this art work. Please do not use without a license.

You can find this art at the CDO Store HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Kit IB Jennifer Janesko 24-3 at CDO
By Honored Scraps and you can get it HERE

Biene Template 3 on Creative Misfits Creations HERE
RR Set Mask_2-1 HERE

EyeCandy4000-Gradient Glow

Font of Choice, I used Before the Rain

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the d to duplicate and close the original, then go to
Image, canvas size and make it 800 x 800, can resize later.
Delete the credits and wordart.

Delete the close off layer toward the bottom and then merge the bottom sm rectangle bottom with the sm rectangle top.
Select, float, defloat, paste paper 3, invert, delete, select none.
Delete your template layers as you go along also.

Merge the diamond layers together.
Merge the Rec right circle down with the left one, select all, float, defloat, paste paper 6, invert and delete. Do not deselect yet, go up to Selections, Modify,
Select selection borders and change the number to 3, add a new raster layer, fill with #7d5f2b or a color of your choice, select none now.

Select the black rectangle, paste paper 5, invert, then do the border like before,
only paste paper 6, invert, delete, select none.
Apply a fat gradient glow with these colors
Width at 3, Soft Corners at 25 and Opacity at 100
first color on white the second color on #7d5f2b

Merge the sm red right circle down with the left one, select, float, defloat, paste paper 3, invert, delete, select none.

Paste element 11, free rotate to the left at 45%, place at the bottom and just above the white background layer, duplicate, flip, mirror.

Being on heart #6 on the template layer, merge down each heart until they are all on one layer, apply an inner bevel with these settings
Bevel shape 2
Width 4
8, 3, 4, 0
48, 36, 42
color white
Add noise at 25%

Paste element 12, free rotate to the left at 90 and paste in the center.

Paste your tube and place touching the dotted line.
Paste element 4 behind your tube layer.

Paste element 20 below the sm red circles and erase any part showing on the edges.
Resize element 16 to 50%, place on the right side to hide the edge of the tube, duplicate the glass and move down a bit.
Paste the wordart, resize to 50%, place by the glasses and add a white fat gradient.

Paste element 13 in the upper left circle.

Take element 8, place in different places and erase all you do not want showing.

Paste element 7, resize to 40%, apply Mura Meister Copies-Encircle, change the first number to 14, move to the upper left circle just above the white background layer.
Take your Pick tool and pull in a little until you like the way it looks, duplicate, move down to the lower right circle.
Resize element 14 to 40%, mirror and place between the glasses.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT Tag for Queen Uriel

CT Tag for Queen Uriel.
I am using her Adorable Clarinha tube.
She is just as adorable as can be and you will
love tagging with this beauty.
I made a forum set with her....

You can purchase her at the following link:

http://www.queenuriel.com/loja/index.asp

Wednesday, January 28, 2015

CT Tag using Robin McQuay

CT tags using the awesome art of Robin McQuay

You can use this tube in so many different ways for many of your tagging needs.
Dreaming, wishing, stars, moon and more.

You can find this art at

Digital Chaos HERE

Tube Dreams Away

CT Tag using PTU Moon Dreams

CT Tag using the Beautiful kit "Moon Dreams "
by Honored Scraps.
This kit is Beautiful, filled with 20 elements, 6 papers, 2 frames and 1 wordart. The Blues and Whites are wonderful to tag with. You will love it.

The kit is available at CDO Store

http://www.cdoestore.com/...

PTU Sweetheart Cluster Pack

CT PTU Cluster Pack using "Sweetheart"
This is a PTU Scrap Kit By Amy Marie Kits
This kit is just right for your Valentine tagging needs and then some.

You will love the Blues, Greens and Pinks in this kit.

Hurry on over to her store and pick up these Clusters and Kit.
The Kit and Cluster's are available at Amy Marie's Store

http://amymarieskits.com/store/

Tuesday, January 27, 2015

PTU Cluster Pack Love U

CT PTU Cluster Pack using "Love U"
This is a PTU Scrap Kit By Amy Marie Kits
This kit is just right for your Valentine tagging needs and then some.

You will love the Reds and Pinks in this kit.

Hurry on over to her store and pick up these Clusters and Kit.
The Kit and Cluster's are available at Amy Marie's Store

http://amymarieskits.com/store/

Saturday, January 24, 2015

CT Tag for Queen Uriel

CT Tag for Queen Uriel.
I am using her Rose Fairy Tube.
She is just as cute as can be and you
can use her on many different styles for your
tagging needs.
You can purchase her at the following link:

http://www.queenuriel.com/loja/index.asp

PTU Cluster Pack using Sweetness

CT PTU Cluster Pack using "Sweetness"
This is a PTU Scrap Kit By Amy Marie Kits
This kit is Sweet just like it's name, you will love the colors and tagging with this kit.

Hurry on over to her store and pick up these Clusters and Kit.
The Kit and Cluster's are available at Amy Marie's Store

http://amymarieskits.com/store/

Friday, January 23, 2015

CT Tag using PTU Sweet Melissa

CT Tag using "Sweet Melissa" by Honored Scraps
This kit is Beautiful, with the different shades of purples. You can use it for your fantasy tags and more.
You can find this kit at
Treasured Scraps
http://treasuredscraps.com/store/index.php...

CT Tags using PTU Love Me

CT Tag using "Love Me" by Honored Scraps
This kit is Awesome, you will love tagging with this kit for Valentine and more.
You can find this kit at
Treasured Scraps

http://treasuredscraps.com/store/index.php...

CT Tags using Robin McQuay

CT tags using the awesome art of Robin McQuay

You can use this tube in so many different ways for many of your tagging needs.

You can find this art at

Digital Chaos HERE

Tube Embrace Her Crimson Kiss

Wednesday, January 21, 2015

CT PTU Quinn Cluster Pack

CT PTU Cluster Pack using "Quinn"
This is a PTU Scrap Kit By Amy Marie Kits
This kit is Beautiful with the Purples and Greens, you will love tagging with this kit.
Goes with the tube I am using Designs by Norella and you can find her tubes at www.designsbynorella.weebly.com...
The Kit and Cluster's are available at Amy Marie's Storehttp://amymarieskits.com/store/