Showing posts with label CDO. Show all posts
Showing posts with label CDO. Show all posts

Wednesday, January 25, 2017

Sheena Pike Love


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Sheena Pike
You need a license to use this art work. Please do not use without a license.
 You can find this art at the CDO store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Romantic Blush by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is Gorgeous, soft beautiful colors for Valentine tagging and more 
 Vix Mask 362  HERE
Check out the rest of the blog HERE
Filters
EyeCandy4000-Gradient Glow

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 5, apply your mask, delete, merge group, then resize larger to 130.

Paste element 13, then element 24,  click inside with your magic wand, expand by 5,
paste paper 6, invert, delete, move below the frame.

Paste your tube in the center.

Resize element 5 to 45%, paste on the left below the frame duplicate, move above the frame,duplicate again, mirror. Go back to the second one, the one you moved above the frame,
erase the part that is covering the chain hanging down on the tube.

Resize element 19 to 40%, paste below the flowers on one side, duplicate, mirror.
Duplicate the left one, free rotate to the right at 90 degrees, move below the first one, duplicate, mirror.
Resize element 20 to 85%, flip, paste at the bottom on the frame layer to the left, erase any of the stem showing above the tube, duplicate, mirror.

Resize element 15 to 40%, apply a fat gradient glow with the color white, using
EyeCandy4000-Gradient Glow and place on the left side.

Paste element 6 below the tube on the right, duplicate, mirror.
Resize element 48 to 30%, place on the right below the tube layer.

Resize element 27 to 30%, paste on the left below the glitter layer, duplicate, mirror, duplicate, move up some.
Resize element 59 to 75%, place below the tube layer with the heart part being on the left.

Paste element 74 on the mask layer on the upper left, duplicate, flip, mirror, adjust on the lower right.

Being on the top layer, paste element 62 on the left, duplicate, mirror, flip.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Sunday, January 15, 2017

Love Forever 3 Piece Set




This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Jamie Kidd.
You need a license to use this art work. Please do not use without a license.
The tube I am using is called Misty 65-3.
 You can find this art at the CDO store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Radiant Orchid by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
Monti Blind Mask HERE 
Check out the rest of the blog HERE
Filters
AAAFrames-Foto Frame
Xero -Soft Vignette and Fritillary

Font of Choice, I used Billion Stars

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste element 37, resize to 90%.

Paste element 5, resize to 50%, move to the left and up some, duplicate, move to the right and down some.
I didn't merge the frame because you might want to readjust them later, so take your magic wand, click inside each frame expand by 5, paste paper 17, invert, delete, move below the tubes,
mirror your tube for one of the frames, paste the tube in each frame, then delete each tube, select none.
Duplicate each tube, go to Adjust, Blur, Gaussian Blur, number on 4, change the blend mode to
hard light, merge each tube down with the other. Then apply Xero filter-Soft Vignette with these settings
Elliptical, Foreground color
Diagonal dots
1, 0, 0, 255
Paste your tube on top of the frames, adjust.

Resize element 85 to 90%, go to Adjust, Hue and Saturation to change the color, use
these numbers
H 208, S 175
Paste element 43 on the glitter layer, resize to 95, duplicate, mirror.

Resize element 77 to 50%, paste on one side at the bottom of the tube, duplicate, mirror, erase the flower on the lower tube face.
Resize element 30 to 30%, paste below the flower on the left, duplicate, resize to 85%, move down a bit.
Resize element 67 to 55%, free rotate to the right at 90 degrees, paste below the flower on the right, duplicate, mirror.
Resize element 100 to 35%, paste at the bottom being on the top layer, duplicate twice, moving these below the flower layers on each end.

Paste element 78 on the bottom layer, resize a bit larger to 105%.
Paste element 34 below that layer on the right, adjust to how you like it, duplicate, mirror, again adjust to your liking.
Resize element 79 to 20%, free rotate to the left at 10 degrees, paste below the top flower layer at the bottom.
Resize element 80 to 20%, paste by the love sign.
Resize element 51 to 15%, mirror, paste at the bottom left side.

If you would like to do a Signature and Avator, do not merge your tag yet.
Add any other elements you would like at this time.

Close off the tubes, frames and the background stuff, you want from the clock and above to copy merged.
Open a new layer 600 x 300, paste your merged layer, resize to 75%.
Go back to your main tag, open all the layers again, then select the purple flower on the bottom layer, paste, resize to 75%, free rotate to the left, duplicate, mirror, move both below the merged layer, adjust, erase the part you don't want showing, duplicate, free rotate to the right at 90, adjust, erase, duplicate, mirror, adjust and erase any other parts.
Add a new layer, fill with #f2e5f5, add a mask of choice, I used Monti Blind mask.
Resize element 51 to 15%, mirror, paste at the bottom left side.

Avator
A size that is allowed for your group or forum,
mine is 200 x 200, fill with  #f2e5f5, apply Xero filter, fritillary with these settings
5, 30, 68, 46
Copy your Signature tag merged and paste, resize to 85%, move how you like the looks, then add a frame of choice.
I used AAA Frames-Foto Frame width on 3 and all other numbers left as is.
Be sure to add your copyright to all tags and name.

Crop your main tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Sunday, January 8, 2017

Cupcake Cutie


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Anna Marine.
You need a license to use this art work. Please do not use without a license.
The tube I am using is 47-3.
 You can find this art at the CDO store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Cherry Cuppie by Irish Princess Designs  HERE
You can also find this kit at one of these stores  here, here, here
Allison's Addictions Template_5 HERE
Check out the rest of the blog HERE 
 DD VMask_7  HERE
Check out the rest of the blog HERE
Filters
Screen Works-Light Gauze

Font of Choice, I used Blacksword

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open your template, hold the shift key and hit the letter d to duplicate, close the original,
delete the credits.
Paste paper 11, apply your mask, delete, merge group, resize mask to 95%.
Paste frame 2 on the top layer, take your pick tool and pull in the sides of the frame to fit the pink circle better.
Click inside with your magic wand, expand by 5, paste paper 12, invert, delete, move below the frame, paste your close up tube, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussina blur number on 4, change the blend mode to screen, then apply the Screen Works filter-Light Gauze, merge down.
Mirror your other tube, paste on top of the frame on the left.
Select the bottom middle circle, float, defloat, paste paper 3, invert, delete, also delete the template layers as you go along.
Do the same with the upper middle circle with the same paper.
You can leave the dash circles as is or add noise if you like.
The upper left, rect, right upper rect, lower left and right, paste the same paper in each,
or if you like you could use a different one on each, I used paper 11.
The left upper and right lower circle rect paste paper 2, invert, delete, select none on both.
Resize cupcakes to 30%, place both in the center how you like.
Resize the bling to 70%, paste on the mask layer at the upper right, duplicate, mirror, flip.
Resize the candy to 35%, place on the right below the cupcakes, duplicate, move one out more.
Resize the cherries to 35%, paste at the bottom of the tube legs to cover the straight edge.
Resize the stars to 40%, paste on the right below the candy.
Paste the sparkles on the top layer, erase any part on the face you don't like.
Paste the scatter at the lower left on the mask layer, duplicate, flip, duplicate, mirror, duplicate, flip.
Resize the cake pops to 50%, place on the right below the stars layer, duplicate, mirror,
move below the tube layer and down a bit.
Resize the lipstick to 40%, place on the right above the candy.
Resize the cocktail to 45%, place in front of the cherries on the left.
Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Wednesday, March 4, 2015

CT Tag using PTU Silence


CT Tag using the Awesome kit "Silence "
by Honored Scraps.
This kit is Beautiful, filled with 20 elements, 6 papers, 2 frames and 1 wordart. You will love tagging with this kit.

  The kit is available at CDO Store

Artists I used were Enys Guerrero  and Akkasshaa is also available at CDO

http://www.cdoestore.com/
 
 

CT Tags using PTU Lucky Shimmer

CT Tag using the Beautiful kit "Lucky Shimmer"
by Honored Scraps.
This kit is just right for your St Patty tagging needs.

You will love tagging with this kit.

  The kit is available at CDO Store

Artist I used were Marika and PinUp Toons
both available at CDO also

http://www.cdoestore.com/
 

Friday, February 6, 2015

CT Tags using PTU Love Ever After

CT Tag using the Beautiful kit "Love Ever After "
by Honored Scraps.
This kit is Beautiful, filled with 35 elements, 6 papers, 3 frames and 3 wordart. You will love tagging with this kit.

  The kit is available at CDO Store


http://www.cdoestore.com/
 

Thursday, February 5, 2015

CT Tag using IB Amy Matthews 40-2

CT Tag using the Beautiful kit "IB Amy Matthews 40-2 "
by Honored Scraps.
This kit is Beautiful, filled with 20 elements, 6 papers, 2 frames and 1 wordart. I love the brown colors in this kit.

 You will love it.

  The kit is available at CDO Store

http://www.cdoestore.com/...
 

Thursday, January 29, 2015

I LOVE You PTU

 
 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Jennifer Janesko.
You need a license to use this art work. Please do not use without a license.
 You can find this art at the CDO Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Kit IB Jennifer Janesko 24-3 at CDO
By Honored Scraps and you can get it  HERE
Biene Template 3 on Creative Misfits Creations HERE 
RR Set Mask_2-1  HERE
EyeCandy4000-Gradient Glow
Font of Choice,  I used Before the Rain

Drop Shadow usually V2 H2 50 black
 
Let's get started
*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the d to duplicate and close the original, then go to
Image, canvas size and make it 800 x 800, can resize later.
Delete the credits and wordart.

Delete the close off layer toward the bottom and then merge the bottom sm rectangle bottom with the sm rectangle top.
Select, float, defloat, paste paper 3, invert, delete, select none.
Delete your template layers as you go along also.

Merge the diamond layers together.
Merge the Rec right circle down with the left one, select all, float, defloat, paste paper  6, invert and delete. Do not deselect yet, go up to Selections, Modify,
Select selection borders and change the number to 3, add a new raster layer,  fill with #7d5f2b or a color of your choice, select none now.

Select the black rectangle, paste paper 5, invert, then do the border like before,
only paste paper 6,  invert, delete, select none.
Apply a fat gradient glow with these colors
Width at 3, Soft Corners at 25 and Opacity at 100
first color on white the second color on #7d5f2b

Merge the sm red right circle down with the left one, select, float, defloat, paste paper 3, invert, delete, select none.

Paste element 11, free rotate to the left at 45%, place at the bottom and just above the white background layer, duplicate, flip, mirror.

Being on heart #6 on the template layer, merge down each heart until they are all on one layer, apply an inner bevel with these settings
Bevel shape 2
Width 4
8, 3, 4, 0
48, 36, 42
color white
Add noise at 25%

Paste element 12, free rotate to the left at 90 and paste in the center.

Paste your tube and place touching the dotted line.
Paste element 4 behind your tube layer.

Paste element 20 below the sm red circles and erase any part showing on the edges.
Resize element 16 to 50%, place on the right side to hide the edge of the tube, duplicate the glass and move down a bit.
Paste the wordart, resize to 50%, place by the glasses and add a white fat gradient.

Paste element 13 in the upper left circle.

Take element 8, place in different places and erase all you do not want showing.

Paste element 7, resize to 40%, apply Mura Meister Copies-Encircle,  change the first number to 14, move to the upper left circle just above the white background layer.
Take your Pick tool and pull in a little until you like the way it looks, duplicate, move down to the lower right circle.
Resize element 14 to 40%, mirror and place between the glasses.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Wednesday, January 28, 2015

CT Tag using PTU Moon Dreams


CT Tag using the Beautiful kit "Moon Dreams "
by Honored Scraps.
This kit is Beautiful, filled with 20 elements, 6 papers, 2 frames and 1 wordart. The Blues and Whites are wonderful to tag with. You will love it.

  The kit is available at CDO Store


http://www.cdoestore.com/...