Wednesday, September 12, 2012

Autumn Wishes PTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Jennifer Janesko.
This was a Sept Bonus tube
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO HERE
Supplies Needed
I used PSPX...but any of them should work.
Mura Meister Filter-Copies
PhotoEffex-Scanlines
Scrap Seasons Change by
Sarah at Wicked Little Cupcake Designs HERE
WSL_Mask 36 HERE
Font KG Fall for you
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*
Open an image to a size you like, I usually do mine 800 x 800 and resize it later.
Copy and paste paper #3 and apply your mask, delete and merge group.
Paste frame 4, click inside with your magic wand, expand by 5 and paste paper #6,  invert and delete, move below the frame.
Resize leaf 2 to 25%, duplicate mirror and flip, will adjust after you add your flower layer.
Erase the stem and the top 2 flower parts, resize to 45%, paste on top of the leaves, now adjust to your liking, merge these 3 layers together.
Apply Mura Meister Copies-Encircle, change the top number to 18, all else at default setting, place on top of your frame. Click inside with your magic wand, expand by 7 and paste paper #8, invert delete, move below your flower frame.
Apply PhotoEffex filter-Scanlines  with these settings
2, 2, 20, 10
100, 0
Resize the wooden ladder to 65%, paste, mirror and free rotate to the left at 35, place on the right side of your frame
Copy and paste the Leaf Vine, place on one side, duplicate and mirror and place on the other side.
Resize the wheel barrel to 65% and place on the right side.
Resize bow #3 to 25% and place on one side, duplicate and place on the other side, where you would like them.
To do the wording Autumn Wishes on a curve, click on your preset tool,  and select the Ellipse circle, close off your background color and select width about 2 or 3, draw a circle around your frame, not touching the frame. Add a new raster layer and click your text tool, hold it over the circle until you see a curve under your A, then type out what you would like yours to say.
You will need to move it around until it is where you want it, then convert to a raster layer, and delete the circle layer.
Add your name to your tag now.
If using a white background, delete that now and merge visible.
Resize your tag first and then add all your copyrights.
Hope you enjoyed doing this tut.





Thanksgiving Blessing PTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  PinUp Toons.
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Seasons Change by
Sarah at Wicked Little Cupcake Designs HERE
WSL_Mask 84 HERE
Xero Filter-Porcelain and Clarity
Font Jayne Print YOFF
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*
 
Open a image to a size you like, I usually do mine 800 x 800 and resize it later.
Copy and paste paper #2 and apply your mask, delete and merge group, duplicate and mirror and move both out a little bit to each side.
Paste paper #3 and apply the same mask, delete and merge group.
Copy and paste frame #3 and resize to 85%.
Take your magic wand, click inside, expand by 5 and paste paper #4, invert and delete, move below the frame layer.
Copy and paste the stone path, mirror and move below the frame and erase anything sticking outside the frame.
Paste the wood latter, resize to 50%, mirror and free rotate to the left at 45% and place on the right side.
Resize ribbon #1 to 50% and place at the bottom of the frame.
Copy and paste the leaf vine, mirror and place on the latter.
Resize flower 2 to 40% and place behind the leaf vine where you like, duplicate once or twice more and mirror one and move where you like the looks of them.
Resize leaf 1 and resize to 50%, mirror and place on the right.
Resize the cupcake to 25% and place on the right side.
Copy and paste your tube and move below the frame, duplicate and move above the frame and erase any part over the frame.
Add the xero filter-porcelain to both tubes.
Once happy with it all, merge visible and resize your tag.
Add the xero filter-Clarity to your tag, and
add all copyrights and name and thats it.
Hope you enjoyed doing this tut.
 
 
 
 

Tuesday, September 11, 2012

Soon to be Fall FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Alex Prihodko.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD HERE
Supplies Needed
I used PSPX...but any of them should work.
Mura Meister-Copies
Scrap kit Blessful Fall by Jennys Design HERE
Font Satisfaction  
WSL_Mask 84 HERE
Drop Shadow usually V2 H2 50 black

Let's get started
Remember to add your drop shadow as you go along.
Open a new image size of choice, I usually do 800 x 800,
more room to work on.
Open paper #2, go to your patterns and select this paper and fill your image with this and apply your mask, delete and merge group.
Open flower, flower 3 and leaf 2
Resize the 2 flowers to 50%, place the orange one first, then the leaf, mirror the leaf and erase the stem part.
Then paste the flower and position everything into place, then merge visible.
*Apply Mura Meister Filter- Copies, Encircle*
Being on the frame layer, take your magic wand and click anywhere outside of it, the frame should be selected now, paste paper #4 and delete, move below the frame layer.
Resize the grass bow to 50% and place at the top of the frame.
Resize leafs to 15%  and place to one side, duplicate and mirror, merge down and add your drop shadow.
Resize leaves to 10% and duplicate 3 or 4 times and place where you like them. May want to move some under the other leaf.
Resize the bush to 50% and place on one side and duplicate and mirror to the other side.
Resize the mushrooms to 25% and place on one side, duplicate and mirror to the other side.
Resize the water can to 20% and place where you like.
Resize the flower splash to 85% and move to the bottom, duplicate and flip and mirror and position.
Resize the time heart to 10%, free rotate to the right, 35% and place by the mushrooms.
Type any wordart that you would like to use and your name now.
I added EyeCandy4000-Gradient glow medium setting for the wordart and my name.
Merge visible and resize your tag now and add your copyright.
 
 

Monday, September 10, 2012

Sexy Vamp FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac.
You need a license to use this art work. Please do not use without a license.
 
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Template by Samantha at Creative Misfits HERE
Scroll down some
Mask by Tonya-Halloween Bats at CM also HERE

Xero Filter-Porcelain
PhotoEffex-Scanlines
EyeCandy4000-Gradient Glow
Scrap Made by Justine called The Lady is a Vamp HERE
Font Rufa 
Drop Shadow usually V2 H2 50 5
 
Let's get started
Open the template, duplicate and close the original.
Then I go to canvas size and make mine 800 x 800.
Delete the credits and the fangs.
Paste paper #1 and apply your mask, and delete and move to the bottom of the template.
Copy and paste Fence01, add your drop shadow as you go along.
Select rectangle back, select all, float, defloat, paste paste paper #8, invert and delete, also delete that layer of the template.
You will be doing this for each layer of the template.
Rectange frame add noise at 50%.
Click on the Oval back layer, select and paste paper #2. Oval layer add the same noise again.
Click the back layer, select all, float, defloat, add a new raster layer, fill with black, add the PhotoEffex filter-scanlines
at that settings
2, 2, 20, 10
100, 0
Vertical toggle unchecked
Border layer add the same noise again.
Sexy Vampire club wordart add, EyeCandy4000, gradient glow with medium setting and a red color of choice.
Left bottom back, select and resize to 80% and paste vamp glitter #3.
Left bottom square, apply EyeCandy4000 Chrome and color with your Change to target brush with black.
Left top back, select, paste paper #1, invert and delete.
Do not deselect yet, now paste your tube of choice and delete and select none. Apply xero filter-soft mood to your tube.
Left top square, apply  EyeCandy4000 Chrome and
go to Adjust, Hue and Saturation, colorize and change both numbers to 255.
Circle back, select, float, defloat, new raster layer and fill with
#840000 or color of choice. Apply PhotoEffex-scanlines with same settings as before but check the Vertical Toggle.
Resize Vamp Lips01 and resize to 60% and place in the circle you just filled.
Add a drop shadow to the wordart.
Copy and paste your full tube and place where you like, I move mind to where the one leg was behind the circle.
Resize boot01 to 50% and duplicate, color the same as before, Hue and Saturation, colorize, both numbers on 255.
Resize the bat01 to 50% duplicate and place.
Copy and paste the screw, place on the black rectangle, duplicate and mirror.
Resize the batty cupcake to 40% and place by the boots.
Resize the blood drop to 25% and place on the lips in the circle.
Add the sparkles, resize if needed and place on the top layer of your tag.
Paste the barb wire and move it down until you have it under the top back layer.
Resize Vamp Lips01 to 25% and place on the left by the frames.
Happy with everything, then merge visible and resize.
Add your copyright and name and you are done.
Hope you enjoyed doing this tut.
 
 
 

Sunday, September 9, 2012

Autumn Feeling FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Alex Prihodko.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap kit Autumn Fall by Eileens Design HERE
Font Dear Joe Four 
WSL_Mask 238 HERE
Drop Shadow usually V2 H2 50 black

Let's get started
Remember to add your drop shadow as you go along.
 
Open a new image size of choice, I usually do 800 x 800,
more room to work on.
Paste paper #2, duplicate and change the blend mode to burn and merge down. Apply your mask, and delete.
Resize element #26 to 90% and paste, duplicate, apply gaussian blur at 5, change the blend mode to burn, merge down.
Take your magic wand, click inside and expand by 5, paste paper #2, invert and delete, move below frame. Duplicate and change blend mode to burn, merge down.
 No not deselect yet, resize your tube if needed and copy and paste, hit the delete key on your keyboard.
Duplicate, gaussian blur at 5, change the blend mode to overlay or what you prefer, merge down.
Resize element #19 to 50% and place on the right side.
Resize element #24 to 50% and place on the right.
Resize again to 50% and move to the left side of your tag and duplicate and place where you like.
Resize element #29 to 90%, place at the bottom of the frame.
Resize element #25 to 50% and duplicate a couple of time and place in random areas.
Also resize element #30 to 90% and place at the bottom.
Resize some of the leaves to a smaller size and place where you like the look.
Resize element #1 to 50% and place on the left side.
Resize your tube if needed and copy and paste, add your drop shadow.
Copy and paste element #35 on the left side above your tube layer.
Merge visible and resize your tag now, and
add your copyright and name.
Hope you have enjoyed doing this tut.
 
 
 

Thursday, September 6, 2012

So Sweet



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Spazz.

You need a license to use this art work. Please do not use without a license.
You can find this art at AIL  HERE


Supplies Needed
I used PSPX...but any of them should work.
EyeCandy5 Impact-Chrome
 or
 EyeCandy4000 Chrome(You will have to play around with this one to get something you like)
Limited time freebie add-on scrap by Raspberry Road Design
called Cherry Hill add-on HERE
WSL_Mask84 HERE
Font Worstveld Sling
Drop Shadow usually V2 H2 50 5


Let's get started
Open an image of your choice, I use an 800 x 800, I like room to work.
Resize paper #6 to 22% and paste on your new image and apply WSL_Mask 84, delete and merge group.
Remember to add your drop shadow as you go along.
Resize frame #11 to 25%, copy and paste and free rotate either left or right at 90%, duplicate twice and apply the EyeCandy5-Impact Chrome filter to the 2 duplicated ones, with these settings
20.11, 20, 22.74, 0
Indoor-office space
On the top chrome frame, apply gaussian blur at 4, change the blend mode to burn, merge down.
Then go to Effects, 3D effects and apply a slight bevel to the red frame on top,
 with these settings
Bevel Shape2, width 3
15, 8, 5, 0
0, 36, 42
Click inside the chrome frame with your magic wand, expand by 3 and paste paper #6, invert and delete, moving the paper below all your frame layers.
Now duplicate your chrome layer frame, resize larger to 110% and flip and adjust into place behind the other chrome frame.
Add your tube and move under the red frame, duplicate and move to top and erase any part of the legs over the frame.
Resize the wordart sweet to 20% and place at the bottom of the frame, and resize the wordart delicious to 15% and place on the sweet wordart 
Resize elements #34 to 10% and #35 to 15% 
Place #35 on the wordart , with the cherry just below the delicious wordart.
Place #34 at lower left behind the sweet  wordart, duplicate, move up to the right and mirror and move the stem part behind your tube layer.
Resize element #8 to 15%, mirror and move to the top by the cherries on the right side.
Resize element #15 to 15% and place behind the delicious and then duplicate, mirror and place behind the sweet wordart to your liking.
Resize element #37 to 20% and place on the right a little below the middle and move below the tube layer.
Add any other elements you would like and once done, merge visible and resize your tag.
Once resized then add your copyright and name.
Hope you enjoyed doing this tut.


Wednesday, September 5, 2012

To Cool for School




This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zlata_M. You need a license to use this art work. Please do not use without a license.
You can find her art at SATC HERE

Supplies Needed
Scrap kit is a collab from SATC, HERE 
If you purchase $10.00 you will get this awesome collab free.
I am using the one made by Inzpired Creationz
ICZ-Back to School Collab
Lithium Flower Creations Masks HERE 
I used the 3rd one down 
PSP...I used PSPX...but any of them should work.

Filters used
Xero Filter-Clarity
EyeCandy4000-Gradient Glow (optional)
Font used Lucas Eleven 

Let's get started
Add your drop shadow as you go along, I usually use V2, H2, 50, 5
Open a new image 600 x 250 
Fill with a dark color from your tube,  add a new layer and fill with white and change the blend mode to soft light. Then go to Effects, texture effects and weave at theses settings 1, 5, 1 both colors black and fill gaps checked.
Copy and paste paper #1 and apply your mask and delete.
Resize the banner to 30% and duplicate 2 more times and place across the top of the tag, merge these layers together. Take your magic wand and click on each flag and then add noise at 35% or what you prefer.
Apply EyeCandy4000 gradient glow, color black, medium setting.
Resize the buildings to 50% and place on the right side of your tag.
Resize the school bus to 40% and mirror and place on the left side.
Resize the wordart 2 Cool for School to 40% and place above the bus. Apply EyeCandy4000 gradient glow with medium setting and color black.
Resize the backpack to 25% and place on the right side, and resize the headphone to 20%, then free rotate, rotate 25%  to the right and place by the backback.
Add your tube and resize if needed, then duplicate, gaussian blur 5, change blend mode to overlay and merge down. 
Apply the xero filter-clarity
Copy sparkles #1 and place just behind your tube layer.
Merge visible, select all, new raster layer, fill with black, selection, modify, contract by 2, hit the delete key on your keyboard, select none and merge visible again.
Add your copyright and name and you are done with this part.
*Avator*
Open a new image 150 x 150
Copy and paste your tag you just finished and resize to 75%, all layers unchecked.
Move to where you like the looks, then merge visible. Then select all, new raster layer, fill with black, selections, modify, contract by 2, delete, merge visible again.
Now add your copyright and name or initial and that's it.
Hope you have enjoyed this tut.