Thursday, August 29, 2013

My Reflection PTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Zlata_M.
You need a license to use this art work. Please do not use without a license.


You can find this art at PFD Store HERE

Supplies Needed
I used PSPX...but any of them should work.
Awesome Scrap kit AMI Red by SassiDesigns PTU HERE
WSL_Mask 194 HERE
Xero Filter-Soft Mood
Font for name Before the Rain 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper 2, apply your mask and delete, merge group.
You may want to enlarge your mask later to fit the tag better.

Paste and resize element 19 to 90%, take your selection tool and draw a rectangle around the mirror part of the frame, just inside the bevel part, mirror and resize your tube if needed, paste, invert and delete.
Change the opacity to about 32% or one you prefer.
Apply the Xero Filter-Soft Mood.

Duplicate the mirror, being on the bottom one, go to Adjust, blur, gaussian blur set radius at 15.

Resize your tube if needed and place on the right side of the frame.

Resize element 16 to 50% and place behind your tube layer.

Resize element 11 to 60%, mirror and place on the left side.

Mirror element 59 and place on the right below the pillow layer.

Resize element 44 to 35% and place on the left side.

Resize element 15 to 20% and place by the dog.

Resize element 33 to 75%, place on one side, duplicate and mirror, with both being below the pillow layer.

Resize element 49 to 65% and place on the left side below the rose layer.

Resize element 8 to 25% and place at the top on the left side above the green vine layer, duplicate and mirror.

Resize the Zlata Ami Bling 5 to 75% and place on the mirror above the tube in the mirror.

Paste Zlata Ami bling 2 and move above the rose layer on the left, erase any over the mirror part, duplicate and mirror.
You might want to add a dark background long enough to see any other parts that need to be erased lower.

Resize the Zlata Ami Bling 7 to 75%, move down to just above the mask layer and move toward the top and sharpen, duplicate and flip.

Resize element 60 to 75% and move below the mirror frames.

Resize element 1 to 25% and place on the left by the handle of the bike, erase the string a little bit to make it look like it is hanging over it.

Resize element 31 to 40%, and place on the left side below the bicycle layer.

Resize element 35 to 50% and place on the right side behind the tube layer.

Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.

Monday, August 26, 2013

Very Natural FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey.
You need a license to use this art work. Please do not use without a license.


You can find his art at his Store HERE

Supplies Needed
I used PSPX...but any of them should work.
I am using Verde Y Limon by Angie PsP HERE
Vivaldi Mask, Primavera Spring HERE
20-20 Mask HERE
Font for name Before the Rain 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Resize to 39% and paste the Primavera Spring Mask, select all, float, defloat, add a new raster layer and fill with #fae63f, delete the mask then.
If you prefer you can just leave it black also, looks good either way.
Paste sparkle element 12 on this layer.

Resize element 13 to 75% and paste.
Paste your closeup tube, apply the 20-20 Mask, delete and merge group.
Being on element 13, go to Selections, select all, float, defloat, invert, before deleting, be on your closeup tube layer and delete.
This will delete the shadow of the 20-20 mask.

Resize element 36 to 45% and place on the right side.

Paste your second closeup tube on the left side below the wordart layer.

Resize element 40 to 20% and place on the right side.

Resize element 41 to 25% and place on the right side.

Resize element 32 to 40%, then Image, free rotate to the right at 90 degrees, move to the bottom part of your tag.

Resize element 4 to 40%, free rotate to the right and place on the bottom part of your tag, duplicate and mirror.

Resize element 18 and 19 to 25% and place how you like them, duplicate a couple of times and move around.

Resize element 10 to 65% and place on the bottom part of the tag, just above the tube layer, duplicate and mirror.

Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.
 

Girls Rock Too PTU

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  PinUpToons.
You need a license to use this art work. Please do not use without a license.
 
You can find this art at CDO HERE

Supplies Needed
I used PSPX...but any of them should work.
Awesome Scrap kit Rock Diva
by Bits N Bobs HERE
WSL_Mask 84 HERE
Font Volutes for name 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later.
Paste paper 10 and apply your mask, delete and merge group.

Paste frame 1, click inside with your magic wand, expand by 3, paste paper 7, invert and delete, move below the frame layer.
Paste BNB-RD-46 first, move below the frame, then paste element BNB-RD-15 in the frame.

Paste BNB-RD-38 and move it on the left side above the frame layer.

Paste your tube on the left side.

Paste BNB-RD-10 and place at the bottom part of the frame.

Resize BNB-RD-4 to 75% and place on the right side, duplicate and mirror and move back to the right side.

Resize BNB-RD-3 to 75% and place on the right side by the shoes.
Paste BNB-RD-35 above the tube layer on the left side and adjust.

Paste BNB-RD-26, behind the tube at the top left side.

Paste BNB-RD-64 on the right side of the frame.

Add any other elements that you would like.
Once happy, resize first then

add all your copyrights and name and you are done.

Hope you enjoyed doing this tut.




Sunday, August 25, 2013

Temptation PTU



 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at his Store  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Awesome Scrap kit Rock Diva 
by Bits N Bobs HERE
Moonbeam and Spiderweb forum Mask #37 HERE
Xero Filter-Radiance
Font Scriptina Pro for name 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 600 x 250, make a black and white gradient, foreground black, background white,
angle set to 45 and repeat to 5, fill your image.
Paste paper #7, crop and then apply your mask, delete and merge group.

Paste your tube on the right side, resize some if needed.

Paste the wordart tempation and resize to 85%.

Paste BNB-RD 46 and move below the tube layer.

Paste BNB-RD 24, duplicate and move down.

Paste BNB-RD 30, below the tube layer, duplicate and mirror.
Have more showing behind the tube on the right and just a small section on the left showing.
Paste BNB-RD 32 behind the tube layer and adjust to your liking, duplicate and move to the left with just a little bit of it showing. 

Paste your close up, mirror and move to just above the paper layer, change the blend mode to soft light.
Apply the Xero Filter, Radiance.
Being on the top layer, resize BNB_RD 64 to 60% and paste on the left side.

Add any other elements that you would like, do not merge yet. Will be using this for the avator also.

Now for the Avator, I opened a new layer 200 x 200.
Paste your tag you just made but close off the tube layer and the wordart, resize to 82% and adjust, paste your tube and resize to 82% also and adjust to your liking.

Once happy merge visible and apply the AAA-Foto Frame, with the width set to 5 to both your signature tag and avator.

Add all your copyrights and name and you are done.

Hope you enjoyed doing this tut.




Thursday, August 22, 2013

Today is Your Day PTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Barbara Jensen.
You need a license to use this art work. Please do not use without a license.
I am using the Bonus tube, if you spend $10.00 you got this awesome Bonus tube.

You can find her art at her Store HERE

Supplies Needed
I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 Your Day by AmyMarie and
you can purchase it at her store HERE
Monti's Blinds Mask  HERE
Xero Filter-Radiance and Porcelain
Font for name Tagettes 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper #19, apply your mask, delete and merge group.

Paste element 51, click inside with your magic wand, paste paper #29, invert and delete, now paste your tube, delete and select none, I mirrored my tube.
Apply Xero Filter-Radiance first then Porcelain.

Paste and resize element 71 to 85% and place on the right side.
Paste and resize your tube if needed and place on the left side.

Paste element 46 on the left under your tube layer, duplicate, move up some, then duplicate again and mirror and move down to just above your mask layer.

Resize element 82 to 55% and paste on the left side below the first flower layer.

Resize element 93 to 55% and place on the right side, duplicate, mirror and move below the first shoe and adjust.

Paste element 80 just below your tube layer. Paste element 70 and move to the bottom part of the tube.

Paste element 36 on the left side just above the mask layer.

Being on the top layer paste the wordart....Today is your day and add a medium gradient glow to it.

Being above the mask layer now, paste element 22, duplicate and mirror.

Add any other elements that you would like.

Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.

Wednesday, August 21, 2013

She's Witching PTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey.
You need a license to use this art work. Please do not use without a license.


You can find his art at his Store HERE

Supplies Needed
I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 Spellbound by AmyMarie and
you can purchase it at her store HERE
WSL_Mask 84 HERE
Font for name Dei Gratia 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper 1, apply your mask, delete and merge group.

Paste element 111, click inside with your magic wand, expand by 2, add a new raster layer and paste paper#1  into selections, select none and move below the frame layer.

Resize element 79 to 75% and place on the right side.
Paste and resize your tube if needed and paste on the left side.

Paste element 8 at the top of the frame.

Paste and resize element 63 to 75% and place on the upper right on the ribbon, duplicate, resize to 75% and place where you like.

Paste element 96, move behind your tube layer, free rotate to the right at 35 degrees.

Resize element 77 to 50% and place on the right by the pumpkin.

Paste element 73 and place at the bottom part of the frame, move below the pumpkin layer, duplicate and mirror.

Paste element 108 on one side, duplicate and mirror, moving them below the tube layer.

Resize element 65 to 75% and place on the right side, free rotate to the right by 15 degrees.

Resize element 58 to 50%, duplicate and place on the eyes of the larger pumpkin.

Add any other elements that you would like.

 Resize your tag first then,
add all copyrights to your tag and your name and merge

Hope you enjoyed doing this tut.

Tuesday, August 20, 2013

Glimmer of Fall PTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Jose Cano.
You need a license to use this art work. Please do not use without a license.
I bought mine when he was with MPT but they are closed now.
You can find his art at SATC  HERE

Supplies Needed
I used PSPX...but any of them should work.
Awesome Scrap kit Autumn Sunset
by Bits N Bobs HERE
WSL_ Mask 84  HERE
Mura Meister Copies-Encircle 
Font Scriptina Pro for name 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Add a new raster layer, fill with #f4cfad, lower the opacity to 55, resize as needed when your tag is done.

Paste BNB-AS77, duplicate, change the blend mode to hard light, mirror and flip.
Paste BNB-AS69, apply Mura Meister Copies-Encircle, change the first Number to 20, be sure to sharpen once.
Take BNB-AS69 and resize to 60% and apply the Mura Meister again with the same settings, sharpen, merge down.
Click inside with your magic wand, expand by 10, paste paper BNB_ASP3, invert and delete.

Paste your tube, move below the frame layer, duplicate, move above the frame and erase the excess part.

Paste BNB-AS37 and move just above the mask layer and move it to the left, then duplicate and mirror.

Paste and resize BNB-AS35 to 30% and place in one corner, duplicate, mirror, duplicate flip, duplicate mirror.

Paste and resize BNB-AS3 to 50%, place on the lower right, below the ornament layer, duplicate and move to the upper left, under that ornament also.

Resize BNB-AS9 to 85%, place on the left side below the ornament layer, free rotate to the right at 25 degrees. Erase some of the ribbon so it will not be so long.

Resize BNB-AS20 to 25%, flip and place by the tag, duplicate more if you like and place elsewhere on your tag.

 Add any other elements that you would like.

Once happy, close off any background, merge visible and resize your tag.

Add all your copyrights and name and that is it.

Hope you enjoyed doing this tut.