Beer Celebration

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called Celebrations of Beer

You need a license to use this art work. Please do not use without a license.

 You can find this art at Scraps N Company  HERE
and also the scrap kit HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Celebrations of Beer Lil Mz's Brainstorm  HERE

RD Mask Set 147_2  HERE

Check out the rest of the blog HERE

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 5, apply your mask, delete, merge group.

Past element 22, click inside with your magic wand, expand by 5, paste paper 9,
invert, delete, paste your close up, delete, select none.

Resize element 56 to 70%, paste off center to the left.

Resize your tube to 45%, paste behind the table to the right being on
the frame layer.

Resize element 29 to 25%, place on the table.
Resize element 27 to 40%, mirror, paste on the table on the right, duplicate,
mirror, place on the left at the bottom and once coins are pasted, move
on top of them.

Resize element 4 to 25%, paste  by the tube legs.
Resize element 28 to 35%, paste at the bottom on the left above the table leg,
duplicate, move over by the hat.

Paste element 37 above the mask layer at the top, duplicate, move down to the bottom more.

Paste element 8 on the frame layer, free rotate to the left at 90 degrees.
Resize element 7 to 25%, paste at the bottom by the hat.

Resize element 19 to 45%, paste on the table below the leprechaun.
Resize element 23 to 45%, paste on the table below the other beers.
Resize element 10 to 25%, free rotate to the left at 20 degrees.
Paste element 93 on the mask layer and up a bit, click inside with your magic wand,
expand by 5, paste paper 5, invert, delete.
Resize element 50 to 25%, paste at the bottom below the coins, move up a bit while applying
the filter, Mura Meister Copies-Glob, change the first number to 20, move below
the paper frame on the left, duplicate, mirror.
Resize element 14 to 35%, paste at the bottom by the horseshoe.
Resize element 11 to 70%, paste about center on the right below all the paper layers of frames,
duplicate, mirror, move down to the lower left.
Resize element 100 to 60%, paste one behind the tube layer on the right, duplicate,
mirror, move above the string on the left.
Resize element 30 to 25%, place on the lower left.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Spring Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.
Tube is called Spring

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Celtic Spring by Irish Princess Designs  HERE
This kit is BEAUTIFUL, the colors are awesome, you will love tagging with
this kit for your Spring and St Patrick tags.

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, ready for all your Spring and St Patrick tagging fun.

RD Mask Set 147_1  HERE

Check out the rest of the blog HERE

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 11, apply your mask, delete, merge group.

Resize element 72 to 75%, free rotate to the left at 10 degree, click inside with your magic wand, expand by 5, resize  your tube to 75%, paste below the frame, invert, delete,
select none.

Resize your tube to 32%,  mirror, paste on the right side of the frame.

Resize element 97 to 55%, mirror, paste on the left above the frame.
Resize element 81 to 50%, paste on the left on the flower layer.
Resize element 78 to 75%, paste on the right below the tube layer.
Resize element 25 to 65%, paste above the tube layer at the bottom to cover
the straight edge.
Resize element 80 to 45%, paste on the right being on the top layer.

Resize element 14 to 35%, paste on the right below the harp.

Resize element 89 to 25%, paste on the left below the flower layers.
Resize element 39 to 75%, mirror, paste just above the mask layer at the lower left.

Resize element 34 to 50%, paste on the left below the flowers.

Resize element 29 to 35%, paste on the left above the branch you just pasted, duplicate, mirror, free rotate to the right at 90 degrees, move above the harp layer..

Resize element 96 to 15%, duplicate, place them by the basket at the bottom.
Resize element 91 to 20%, paste at the bottom under the flower layer.
Resize element 56 to 50%, mirror, free rotate to the left at 50 degrees, paste at the upper left, duplicate, mirror.

Resize element 95 to 25%, mirror, paste at the lower left, being on the top layer,
duplicate, resize to 75%, move to the top where you like.
Paste element 50 just above the mask layer on the upper right.
Paste element 22 on the top layer, erase the part on the face in the frame.
Resize element 81 to 60%, paste the small part on the harp and erase the rest.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT PTU Irish Lassie 3 Piece Set

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica
Tube is called St Patrick's Special Pack 2017 tube 1

You need a license to use this art work. Please do not use without a license.

 You can find this art at her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Royally Irish by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, ready for all your St Patrick tagging fun.

DD SPD Mask 3  HERE

Check out the rest of the blog HERE

Font of Choice, I used Crispy

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 29, apply your mask, delete, merge group,
and I mirrored my mask.

Resize element 22 to 90%, click inside with the magic wand, expand by 5, paste paper 27,
invert, delete, select none.

Resize your tube to 35%, paste on the left side of the frame.

Paste element 52, mirror, paste on the left behind your tube.

Mirror element Ail 3, paste on the frame layer and move to the right just a bit.
Paste element 3 on the right at the bottom, resize to 40%.

Resize IAH element 96 to 40%, paste on the left above the tube layer by the foot.

Paste Lucky Collab CUE18  at the bottom below the tube layer, duplicate, mirror.
Paste element IAH 77 above the gold fleck layers you just pasted.

Resize CUD Designer Mix 409 to 40%, paste on the left below the shoe, duplicate, mirror,
move below the horseshoe layer.

Resize AIL element 24 to 25%, paste at the bottom on the right of the tube.
Paste element 16 below the tube layer and adjust how you like.
Resize element 27 to 50%, paste on the right below the vine, mushroom layer and down some,
duplicate, move up just a bit,
duplicate again, mirror, move down some behind the violin.

If you are going to do the Signature and Avator, don't merge your tag just yet.

Signature
Oen a new image, 600x250, paste paper 27.
Paste the mushroom vine frame on the right more.
Paste your tube on the left.
Paste the violin, mirror, resize to 70% and move to the left below the tube.
Paste the gold fleck layer at the bottom, duplicate, move over.
Paste the clover and coin layer at the bottom, above the fleck layer.
Resize the horseshoe to 60%, paste on the right.
Paste the white flower on one side, duplicate, mirror, adjust to your liking.
Add any other elements if you like, then merge visible, add your frame.
I used AAA Frames-Foto Frame with the width set at 3 and everything else at default.
Add your copyright and name.

Avator
A size that is allowed for your group or forum
Mine is 200x200
I took the tag from the Signature, resized it to 90%, pasted so the mushroom
part was showing, if you prefer the tube part showing, that is up to you.
Make it your own.
Once happy, merge visible, add your frame with the same settings as before.
Add your copyright and name.

Now back to your tag, add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT PTU Patrickcia Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called Patrickcia

You need a license to use this art work. Please do not use without a license.

 You can find this art at Scrap N Company  HERE
and also the scrap kit HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Patrickcia Lil Mz's Brainstorm  HERE

DD SPD Mask_3  HERE

Check out the rest of the blog HERE

Filters
Mura Meister Copies-Glob

Font of Choice, I used Spring Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 6, apply your mask, delete, merge group.

Paste element 38, flip, click inside with your magic wand, expand by 5, paste paper 6, invert, delete, keep selected, paste your tube on one side, mirror the tube and then paste in the other frame, delete, both, select none.

Paste element 40 below the frame paper, place how you like, erase any part you
don't want showing.

Resize your tube to 50%, paste in the center.

Resize element 74 to 70%, paste on the right below the tube.
Resize element 8 to 25%, paste on the chair.
Resize element 23 to 25%, paste by the chair leg.

Resize element 68 to 50%, paste about center to apply the Mura Meister Copies filter-Glob then move down and below the paper layer of the frame, you may want a different look
with the rocks, so play around with the numbers, I used the first number 27 on mine,
duplicate, mirror, duplicate again and use this one to fill in and erase parts you
don't want.
Resize element 58 to 40%, paste on the left on the rocks, duplicate, mirror, place behind
the chair where you like, duplicate again, move more to the center behind the tube.

Resize element 66 to 65%, paste on the rocks, above the chair on the right, duplicate,
mirror, move over and up on the lower frame a bit.

Resize element 69 to 30%, paste below the tube layer on the left.
Resize element 71 to 25%, paste by the feet of your tube and below.
Paste element 2 below the tube layer at the top on the ribbons of the frame.
Resize element 85 to 50%, paste at the upper right below the gold element, duplicate,
mirror, adjust on the left upper side.
Resize element 31 to 25%, paste on the hat at the bottom.
Resize element 62 to 30%, place on the left above the flower layer.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

St Patty Girl PTU

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Dixie Black aka Swan'Scraps. 
This tube called Valentine,  she comes with lots of different layer colors
and close ups for you to enjoy.
 

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD Store  HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap also at PFD,
Kit My Lucky Charm by Dance In The Rain HERE

RR Mask Set 2_1  HERE

Font of Choice, I used Mf Qeen Leela

Drop shadow is usually V-2 H-2 Black, 50, 7

 

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste frame 5, resize to 85%, click inside with your magic wand, expand by 5,
paste paper 8, invert, delete.

Resize the Badge to 75%, place inside your frame, select all, float, defloat, paste
one of the sparkles on the badge, invert and delete, select none.

Resize the Hanging clover to 55%, apply Mura Meister Copies-Encircle, move below the paper layer.
Resize the Doodle to 85%, paste below the paper frame layer.

Resize your tube to 65%, paste on the right side.

Resize banner 2 to 75%, place at the bottom of your tube.
Paste bead 2 on the top of the banner, duplicate and move to the bottom edge
of the banner.
Resize bear 4 to 45%, place on the right side.

Copy and paste beer glass behind the teddy bear on the right.
Resize beer 3 to 45%, place by the first glass on the right.

Resize the bag of goodies to 40%, place on the left side.
Resize the barrel to 50%, place on the left in front of the goodies bag.

Resize flowers and flowers 2 to 50%, place flowers first and then flowers 2.

Resize the cupcake to 40%, place below the barrel on the left.
Resize the girl of gold to 50%, place behind the cupcake layer.

Paste scatter 4 on the bottom layer.

Resize coins 1 to 25%, place below the tube layer and move over to the left,
duplicate and slide over to the right side.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.