Showing posts with label Garv. Show all posts
Showing posts with label Garv. Show all posts

Wednesday, September 23, 2015

The Hunt

 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey,
the tube is called The Hunt 

You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Thankful Harvest by BLT DeZignz  HERE 
DD Fall Mask 1 HERE
Check out the rest of her blog HERE
Filters
Mura Meister Copies-Encircle
Xero-Soft Mood and Clarity
Unplugged Tools-Interlace

Font of Choice, I used KG Fall for You

Drop shadow is usually V-2 H-2 Black, 50, 7
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 11, apply your mask, delete and merge group.
 
Resize the Swirl to 75%, apply Mura Meister Copies-Encircle with the first number on 12.
 
Paste frame 1, duplicate, change the blend mode to burn. 
Then click inside with your magic wand, expand by 5, paste paper 14, invert, delete, do not deselect yet. Take your close up tube, mirror, paste, delete, select none.
Apply to your tube, the Xero Filter-Soft Mood first, then Clarity.
Then apply the Unplugged Tools-Interlace to the paper  and your tube with these settings
1, 16, 1, 0
 
Paste the foliage, take your Pick tool, holding down the shift key, move your arrow onto the square on the top one, pull down until it is as low as you like.
Do this on the other side also, keep pulling each corner down until it is as flat as you like, do not pull to the center, pull straight down, then move to the bottom and below the paper layer of the frame.
Duplicate a couple of times and move each one over more.
 
Paste your tube on the right side.
 
Paste branch 1 above the mask layer at the top, free rotate to the right at 90, resize to 75%, duplicate, mirror, duplicate again and move down on both sides.
 
Resize the barrel to 40%, place on the right below the tube layer.
Resize the pumpkin to 70%, mirror place below the barrel layer.
Resize the wheel barrel to 70%, paste toward the left more.
Paste the crow, mirror, resize to 35%, place on the left side in front of the wheel barrel.
 
Resize the pitcher to 40%, place on the left, below the wheel barrel.
 
Resize the leaves scatter 2 to 25%, place on the foliage at the bottom, duplicate a couple of times and move over some. Use your Pick tools like before if you want to make them lay flatter.
 
Resize the hat to 35%, place on the right side below the leaves layer.
Resize the ribbon to 60%, free rotate to the right, place at the top, move below the circle ring of flowers, duplicate, free rotate to the right, move on the side how you like, duplicate, mirror, erase the one end of each ribbon sticking out.
 
 Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 
That's it
Hope you enjoyed doing my tut.
 

 

Sunday, November 27, 2011

Pink Jolly Christmas FTU

Pink Jolly Christmas

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey. You need a license to use this art work. Please do not use without a license. My license was when he was at MPT but they have closed now.
You can find his art at PTE HERE



Scrap kit used is by Fantasy Dreams Designzs 
called Snow Time a mini freebie she offers, and you can get it at her blog HERE and her home page is HERE

Template used from Candydelicious Designz and you can get it HERE
WSL Mask84 and you can get it HERE
Font I used was DomBold BT comes with psp 

Supplies Needed

I used PSPX...but any of them should work.
Drop Shadow V2 H2 50 5
Filters used
PhotoEffex-Scanlines
xero filters- Porcelain and Mistifier
EyeCandy 4000-Gradient Glow
EyeCandy 5 Impact-Chrome

Drop shadow is usually 2V 2H 50 5 Depending on where you want your shadow sometimes you might have to do the minus on them.

Ok Let's get started
Open the template and shift D to duplicate and close the orginial one.  Copy and paste paper #9 and apply WSL mask 84, delete and merge group, move below template.   On the Black circle and white circle we will be using paper #7, or paper of your choice. On each do the select all, float, defloat, copy and paste, then invert and delete. Delete both parts of the template now also. The red rectangle, select, float, defloat, add a new raster layer and select a dark and light color from your tube and make a gradient, with angle 45, repeat 7, flood fill and now apply Photo Effex-scanlines, delete that layer of the temp.  On each one of theses I added a medium gradient glow with the color then the white and then added a drop shadow.
Now on both green squares, select, float, defloat, copy and paste paper #4 or one of your choice, invert and delete. Do Not deselect yet, copy and paste your close up on one and delete the excess. Mirror your close up and copy into the other green square and delete excess. Apply xero porcelain twice, then mistifier to both, both filters on default settings.  Copy and paste your tube and mirror and position into place behind the wordart, refer to my tag.  Copy and paste the pink tree and place to the left just behind the feet of the tube, add your drop shadow.  Element E-15 resize 50% and place to the right on the template behind your tube and erase the cord on it, add your drop shadow. On the grey frames I used EyeCandy 5 Impact-Chrome and recolored it with the change to target brush with my gradient from before. On the red Christmas wordart, select all, float, defloat, add a new raster layer, flood fill with a color from your tube, select none and delete the red wordart.  Add your drop shadow to the white wordart background.  On the 2 black wordart, I added the medium gradient glow to them and added the drop shadow.  Take Element E-132 and resize 50% and place behind your tube toward the bottom a bit and behind the tree also, add your drop shadow. Close off any backgrounds you might have and merge all visible and resize before you add your copyright.
Now add your copyright and name and you are done.
Hope you have enjoyed doing my tut.
Thank you
Hugs SharonC