Showing posts with label Kajenna. Show all posts
Showing posts with label Kajenna. Show all posts

Monday, February 13, 2017

Spring Time


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Kajenna.
Tube is called Digby
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Watercolor Garden by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is beautiful, lots of different ways to tag with this one, Spring, Easter and more.
Mask19 by Angie Tagged Me  HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle

Font I used Good Dog

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 5, apply your mask, delete, merge group.

Paste element 61, resize to 80%, click inside with your magic wand, expand by 2, paste
paper 5, invert, delete.

Resize element 56 to 85%, paste, duplicate, being on the bottom one, move over a bit and down, erasing the fence  except for the last post, duplicate, mirror.

Resize element 10 to 40%, paste on one side below the top fence, duplicate, mirror, duplicate
again, move below the tube layer on the right.

Resize your tube to 28%, paste above the fence layers on the grass.
Resize element 30 to 40%, paste below the tube by the tail, free rotate to the left
at 15 degrees.
Resize element 27 to 25%, paste on the left below the tube layer.
Resize element 39 to 40%, paste on the right below the flower layer behind the tube.

Resize element 62 to 25%, paste on the right in front of the wooden stool.
Resize element 14 to 55%, mirror, paste on the right below the stool layer.
Resize element 66 to 65%, free rotate to the right at 30 degrees, paste on the frame on the right,
duplicate, mirror.
Resize element 67 to 20%, paste below the lantern on the right.
Resize element 59 to 70%, paste on the left just above the frame layer.
Resize element 40 to 15%, paste on the bench, then back to the original bird, resize to 10%,
paste on the spring sign.
Resize element 28 to 15%, paste below the pots on the left, duplicate, move more to the left and down some.
Resize element 49 to 30%, mirror, paste on the left below the rocks.

Resize element 29 to 45%, mirror, move more to the center of your tag, then apply Mura Meister Copies-Encircle changing the first number to 25, then move to just above the mask layer.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Thursday, February 9, 2017

Bad Attitude Cat


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Kajenna.
Tube is called Felix
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Urban Jungle by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is AWESOME, so many ways to tag with.
Forum Set Templates 16 Bad-itude by Sylly Creationz HERE
Check out the rest of the blog HERE
Vix Big Mask 018  HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle
EyeCandy 4000-Chrome


Font of Choice

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
and delete the credits.
Go to image, resize all checked, resize to 85%, then Canvas size 800 x 800.
 Delete credits and this girl has wordart and drop shadow.
Move the wordart Bad-itude and it's white layer down to work with later.

Paste paper 6 on the bottom layer, apply your mask, delete, merge group.

Resize element 54 to 45%, apply Mura Meister Copies-Encircle, change the first number to 35
Paste element 32, flip resize to 70%, apply Mura Meister Copies-Encircle, change the first number to 20.
Resize these again later after you have finished adding all the other elements.

Select the light orange rectangle,  resize paper 10 to 75%, paste, invert, delete.
Select the large green rectangle, resize paper 3 to 75%, paste, invert, delete.
Dark orange back rectangle, paste paper 3, invert, delete.
Dark purple rectangle, paste paper 2, invert, delete.
Light orange rectangle, paste paper 3, invert, delete.
Light purple circle, paste paper 4, invert, delete.

Select the gray circle, apply EyeCandy 4000-Chrome with these settingsReflection Map-Outdoor tif
Bevel width 10.80
Bevel Height 50,
Smoothness 50
Thickness 0
Ripple width 72.00
Inside marquee checked
Then go to Adjust, Hue and Saturation, Colorize with these
numbers Hue 25, Saturation 134
or change it to a color you prefer.
On the Fritillary circle, use the same colorization as before.

Select the dark orange rectangle, paste paper 4, invert, delete.
Purple circle, paste paper 2, invert, delete, resize your tube to 75%, paste how you
prefer, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode
to hard light.
Select the small green rectangle, resize paper 3 to 75%, paste, invert, delete.
3 circle noises change the color like before using Hue and Saturation.
Select the 3 circles, paste paper 5, invert, delete.
Delete the dots.

Resize your tube to 30%, place on the right side.

Resize element 18 to 85%, paste on one side below the light orange rectangle layer, duplicate, mirror.
Move the wordart Bad Attitude onto the wall edge on both sides, recolor a color of choice.
Resize element 1 to 75%, paste below your tube on the left.
Paste element 58 below the wall on one side, duplicate, mirror.
Resize element 14 to 35%, paste on the left.
Resize element 28 to 45%, paste on the right below the tube, duplicate, mirror.
Paste element 15 at the top above the feather circles on one side, duplicate, mirror,
move down just a bit.
Paste element 25 on the Fritillary circle layer, move to one side more, duplicate, mirror.
Resize element 37 to 40%, paste on the right below the tube layer.
Resize element 32 to 35%, paste at the bottom by the collar, duplicate a couple of times and
move where you like.

Select the wordart Bad-itude, paste paper 2, invert, delete, merge down with the white layer,
move up on the left where you like.
Resize element 34 to 20%, paste on the left below the bottle.

Resize element 12 to 25%, paste on the barrel.
Resize element 81 to 10%, paste on the barrel next to the one with the bullet holes, duplicate,
move down on the lower barrel below your tube.

Resize element 76 to 25%, paste by the collar on the right and below that layer.
Resize element 71 to 25%, paste below the barrel layer on the left.
Resize element 70 to 10%, paste at the bottom by the chain, duplicate, move over some.
Resize element 47 to 15%, place by the bottle on the left.


Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Monday, February 6, 2017

Friends-Sunshine of Life


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Kajenna.
Tube is called Bear (Teddy Bear)
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Beary Sweet by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is AWESOME, with Yellows, Blues and Whites make up this cute kit.  
Honey bees, a cute bear and plenty of flowers
Template Friendship 2 by Sylly Creationz HERE
Check out the rest of the blog HERE
RD Mask Set 136_#2  HERE
Check out the rest of the blog HERE
Filters
xero-Fritillary

Font of Choice, I used Spring Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
and delete the credits.
First I went to image, resize all checked to 85%, then Canvas size 800 x 800.

Paste paper 10, apply your mask, delete merge group.

Resize your tube to 30%, mirror, place on the left side below the larger wordart and sun.
Then move the wordart over to the right more and the sun up to the upper right.

Working from the bottom on the template, select the green rectangle, paste paper 1 with the daisies showing at the bottom, invert, delete, select none.

Select the pink rectangle, paste paper 5, adjust, invert, delete, select none.
Merge the top yellow square down with the bottom right square, apply the
xero filter-Fritillary with these settings
5, 30, 100, 16
Merge the left pink square down with the pink circle, select, paste paper 6, adjust, invert, delete.
Select the blue square, paste paper 16.
Add noise at 25% on the white square.
Select the green square, paste paper 18, invert, delete.
Add a drop shadow of choice for the pixel wordart.
Blue, White and Green circles leave as is.
White diagonal square, add noise at 25%.
Pink diagonal square, paste paper 2, invert, delete.
Yellow strips add the same fritillary settings as before.

On the wordart Friends, go to Effects, 3D, inner bevel with these settings
Bevel Shape 2, width 2
18, 2, 9, 10
315, 50, 30
color white
Resize element 25 to 75%, paste on one side, duplicate, mirror, adjust, duplicate twice more,
move to just above the mask layer on each side.

Resize element 20 to 50%, paste on the right below the bear layer, erase the top boxes.
Resize element 105 to 50%, place on the left below the bear, duplicate, mirror, move below the
boxes, erase some of the stem showing below.
Resize element 3 to 25%, mirror, paste below the tube on the left.
Resize element 47 to 75%, paste on the left below pink circle layer, duplicate, mirror, move down some.
Resize element 53 to 50%, paste on the right below the daisy flowers.
Resize element 78 to 50%, paste on the right, adjust, duplicate, move more to the left.

Resize element 90 to 40%, paste by the boxes on the right at the bottom, duplicate, resize to 90%, move to the left more.
Resize element 70 to 15%, paste at the bottom by the branches.
Paste element 65 below the tube layer at the bottom.
Resize element 92 to 20%, paste on the right below the boxes.
Resize element 4 to 15%, paste on one side where you like, duplicate, mirror.

Resize element 55 to 35%, paste below the box layers and adjust behind the tube how you like,
duplicate, mirror, adjust on the left, duplicate, mirror, move below the daisy on the right.
Resize element 103 and 104 to 15%, place at the top how you like.
Resize element 64 to 95%, paste at the bottom below the twig layers.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.