Sunday, March 4, 2012

Music Music FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Cedric Poulat. You need a license to use this art work. Please do not use without a license. You can find his art at PTE HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used is Music Music and you can get it HERE
Xero filter-Porcelain and Mistifier
Font used is called Schneidler Blk BT it comes with PSP
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image, fill with white so you can see what you are working on. Alway add your drop shadow as you go along, I will not keep repeating that part. 
Copy and paste frame 2 onto your new layer. Take your magic wand and click inside and expand by 2 copy and paste paper of choice, I used #11. Then invert and delete. Do not deselect yet, copy and paste your close up and position then delete and select none, mirror your close up.  Now duplicate, gaussian blur at 3, blend mode overlay or what you prefer. On original tube apply xero-porcelain filter. Then back to the copy and merge down and drop shadow. Apply the xero filter, mistifier to this now. Copy and paste RB deco2 and place to the right behind the frame, duplicate, flip and mirror.  Copy and paste the RB boule and resize to 75% and move to the top left just above your white background layer. Be sure you are on the top layer now and copy and paste your tube and position to the left.  Resize RB disque 2 to 40% and take your pick and hold the shift key down and click on the little squares and pull out to the left some and then go to the right and push in some to get the record to look like it is angled. Will have to play with this a bit to get the look you would like and then place under the knee of your tube. Copy and paste Rb disque 3 and resize to 30% and place behind disque 2. Resize the microphone to 30% and place on top of the disques.  Resize the ipod to 45% and place to the right behind the disques. 
Take your freehand selection and draw around the black square on the ipod, copy and paste your tube, position, invert and delete, blend mode set to hard light or what you prefer.
Now copy and paste your RB starl and move to the bottom above the white layer and move to the right just a bit, so you can see a few of the stars. Resize the guitar to 75% and free rotate to the left by 10%, place behind the ipod.  Add any other elements that you would like. 
Then I added the RB sparkles just under the tube.
If happy with everything, close off your white background, and merge visible. Resize your tag at this time and then add your copyright and name and you are done. On my name I added a weave to it to match the music word on the frame. Take your magic wand and click inside each letter,  settings I used were, go to effects, texture effects, weave and white for both colors and the numbers set at this  1, 6, 1.
Thanks for giving my tut a try.
Hugs Sharonc

Friday, February 24, 2012

Garv Mellow Yellow FTU

Garv Yellow

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey. You need a license to use this art work. Please do not use without a license. You can find his art at PTE HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap kit used is Mellow Yellow by Shortie Scraps HERE
Xero filter-Radiance and Mistifier
Monti Blind Mask  HERE
Font used is called Before the Rain
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image, fill with white so you can see what you are working on.
Copy and paste paper of choice, I used paper #15, apply monti blind mask, delete and merge group. Copy and paste frame 8. Take your selection tool and draw around the top half and delete the part with the bow. Duplicate and flip and line up as one frame again, then merge down. Add your drop shadow V2 H2 50 5 with a color from the frame, I used #db9d2e. Take frame 6 and copy and paste and resize to 85% and place on top of the other frame you just made and use the same color for your drop shadow, merge the 2 frames.
Take your magic wand, click inside the frame and go to selections, modify, expand and expand by 2, copy paper of choice, I used #13,  invert and delete, do not deselect yet. Now add your close up below the frame and delete, now deselect.
Apply Xero filter-Radiance first then apply the Mistifier next.
Add your tube on top of frame and mirror and resize if needed.
Resize Cupcake 1 and duplicate, add drop shadow and position on the left side.  Resize element 7 the rose also to 30%, place in front of the cupcake. Resize Cupcake 2 to 25 to 30% and place by the rose. I took my Pick and rotate the rose a bit to my liking. Take element #2 the crown and resize to 40# and place behind the cupcakes, take your pick and rotate it to the left a little bit, then add your drop shadow. Place ribbon #2 behind the rose on the left and add your drop shadow. Then take one of the roses and resize and add on top of the bow on the frame. Add any other elements that you would like.
Resize tag and add your copyright and name now. I added a medium gradient glow to my name and then a drop shadow.

Hope you have enjoyed doing my tut.
Hugs SharonC

Thursday, February 23, 2012

Happy St Patty FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zlata M. You need a license to use this art work. Please do not use without a license.
You can find this art at The PSP Project HERE
Scrap kit used St Patrick by Fantasy Moments HERE
 Font I used was Celtic 
Supplies Needed
Mask WSL_Mask 84 and you can get that HERE

I used PSPX...but any of them should work.
Drop Shadow V2 H2 50 5
Xero Filter-Porcelain, Mistifier, Improver
EyeCandy 4000-Gradient glow and glass

Let's get started

Open a 700 x 700 image
Copy and paste paper of choice and apply Mask 84, delete and merge group. 
Resize element #77 to 85% and copy and paste onto your new image. Then copy and paste element #50 and resize to 87%, add your drop shadow. Take your magic wand and click inside your first frame, selections, modify, expand by 5, copy and paste paper #15, invert and  delete, do not deselect yet, add your close up tube and move to the right just a bit and delete, now select none.
Duplicate your close up, adjust, blur gaussian blur at 4, change the blend mode to what you like, I used overlay.
Then add xero filter, porcelain to the orginial closeup and merge down.
Then add xero Mistifier, then Improver click on landscape and then ok. Add your drop shadow.
Now add your tube on top of the frames and resize if needed, I resized mine to 85%, then mirror and place to the left .
Resize element 44 to 50% and place to the right of your tag. I added a little noise to the coins.
Resize element 26 to 50% move below the frames and paper and place at the bottom under her shoes, duplicate, flip and place behind the tubes head....duplicate and move up about half way behind her back, duplicate, mirror and position behind the pot of gold.
Resize the ribbon element #10 to 50% and place at the bottom behind the tube and pot of gold . Then I duplicated it a couple of times flip and just played around until I liked the look of where they were, just showing the tip of it in different areas...
Be creative and let your own style come thru on this part...
Now go to your preset and Ellipse and draw out a circle around the frame. add a new raster layer and then click your text, move your arrow over the circle until you get an arch with the a, then type out what you would like to say...I said Happy St Patty and used the font Celtic. Once happy with the wording, covert to raster layer and delete the vector circle and add Eye Candy 4000 glass with these settings..bevel width 30, smoothness 75, then the others 30, 35, 50, 0, 50 and then add Eye Candy 4000 gradient glow, fat setting at 3, 25, 100, then your drop shadow.
Now resize your tag and add your copyright and name...add the Eye Candy glass and gradient glow to your name also....you are done
Hope you have enjoyed doing my tut
Hugs SharonC

Tuesday, January 24, 2012

Tag Show Off from a Tut

Mavy Love hurt tut

The artist I used is Lady Mishka at Pics For Design. You need a license to use this art, please do not use without a license.  You can get it at PFD HERE

Here is a tag I made from an awesome tut by Tragedy Creationz and you can find her tut HERE

Wednesday, January 18, 2012

LUV U PTU

LUV U

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Elias Chatzoudis. You need a license to use this art work. Please do not use without a license. I have the lic # for when he was at MPT, but they have since closed and now you can find his art at PTE HERE

Supplies Needed
Scrap kit I used is called Love U Beary Much by Sinfully Sweet Creations, a PTU and you can find the link to the stores on her blog HERE
Look on the left side.

I used PSPX...but any of them should work.
Xero Filter-Porcelain
Drop Shadow usually V2 H2 50 5
WSL_Mask 84 and you can get it HERE

Ok Let's get started
Open a 700 x 700 image, can resize later. Paste paper 6 on  the new image and apply WSL_Mask 84, delete, merge group. Lower the opacity of the mask to about 75%.  Open and resize Heart 1 to 80% and paste on your new image.  Take your magic wand and click inside the heart frame and expand by 5. Copy and paste paper 2, invert and delete, move below the heart frame. Add your tube of choice below the heart frame also, then duplicate and bring to the top, erase any excess from both tubes, then add xero filter-Porcelain to both and add your drop shadow to your bottom tube and frame.  Resize Valentine bear 4 to 20%, place on the left at the bottom of the frame and then, mirror and place on the right side at the top. Resize the Button Heart to 13% and place on the left side on top of the Heart frame. Resize the bow to 13% and place on top of the button, add your drop shadow and then merge down. Duplicate twice and place on your frame where you like the looks of them. I used the font Impact that comes with PSP for the name and word LUV U and used paper 6 and a stroke of one with black. Then I resized ribbon 1 and erased it in different places to make it look like it was woven in and out of the name.  Resize your tag and then add your Artist copyright and name and any wordart you want. Then you are all done.
Hope you have enjoyed doing my tut.
Hugs SharonC

Tuesday, January 17, 2012

ButterFly FTU

Butterfly2

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Roman Zaric. You need a license to use this art work. Please do not use without a license.
You can find his art at PTE HERE
I used a Cluster Frame called Thunder in the Cedars from RasberryRoad HERE
I am not sure if it is still on there or not.
Font I used was Ampir Deco 
Supplies Needed

Mask WSL_Mask_302 and you can get that HERE
Image of choice, a sunset one of some kind will do.
I used one from sxc.hu HERE
I used PSPX...but any of them should work.
Drop Shadow V2 H2 40 5
Xero-Porcelain
Photoeffex-Scanlines

Open a 700 x 700 new image, can resize later.
Add a new raster layer and flood fill with color #84906c, resize to 85% and apply your mask, delete and merge group. Add Photoeffex -Scanlines at default setting. I add a little bit of texture to my mask. Go to Effect, Texture Effects, texture and pick one you like. I used the canvas coarse texture, with the size 25% and all settings except the depth set at 1.  Then angel 315, 50, 30 on the other settings.  Resize your frame to 18% and paste onto the new image. Now adjust your mask into position. I took my pick and pulled it out on the sides some, just depends on what you like. Take your selection and draw out a rectangle on top of your frame, copy and paste your Image of choice into selection, then select none. Be sure this is moved below your frame, select none.
Take your selection again and draw around one square of the frame, copy and paste your tube, invert and delete.  Change the blend mode to screen, duplicate and apply xero porcelain and change the blend on this one to burn, merge down. I add xero porcelain to it again. Then I duplicated that and mirror and position in the center frame behind the tube and lowered the opacity to 40.  I took my selection tool and drew around the twig on top, then flipped, mirrored and moved behind the frame by the feather. Now copy and paste your tube and mirror and move below the frame, then duplicate and move to the top and erase the parts you do not want showing over the frame, add your drop shadow to the bottom tube. Add any words or saying and then merge visible. When resizing be sure it is set to either Smart Size or Bicubic.
Resize your tag at this time, then add your Artist copyright and your name and you are done.
Hope you have enjoyed doing my tut.
Hugs SharonC 

Saturday, January 7, 2012

My Valentine

My Valentine

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Christine Kotlark. You need a license to use this art work. Please do not use without a license.  You can find her art at PTE HERE

Supplies Needed

I used PSPX...but any of them should work.
Drop Shadow usually V2 H2 50 5

Scrap kit used is by CeridywnRose Designs
called My Valentine and you can get it at the Creative Misfits Creations HERE and her blog is HERE

WSL Mask84 and you can get it HERE
Font I used was Amperzand 

Ok Let's get started
Open a 700 x 700 new image. 
Copy paper 12 and apply WSL_Mask 84, delete and merge group.  Copy and paste Glitter Heart 4 and resize it to 95%, add your drop shadow. (Optional) on the glitter heart, I added noise at 75%.  Copy and paste heart frame 1, you might need to adjust it some to center it inside the glitter heart. Take your magic wand and click inside and go to Selections, modify, expand to 35, copy and paste paper 1, invert, delete and move below the heart frame.  Now take the element heart dangly and paste it and move below the heart frame. Now go to your pick tool and stretch the heart out until all the chrome of the heart is cover, erase the chain and pin on the heart dangly.  Copy and paste the wordart, My Valentine and resize to 70% and place on top of the heart dangly and add your drop shadow. Now take sparkle 1 and place to the upper right part of the heart dangly and erase any excess outside of it. Duplicate it, mirror, flip and place on the right side of the heart dangly, there still might be more to erase if you didn't get it all the first time.  Merge the 2 sparkle layers and move below the heart dangly layer.  Open flower brad 2 and resize to 45% and place on top of the heart at the bottom, add your drop shadow. Duplicate and resize to 75% and place on each side of the first one. Now copy your tube and place on top of the flower brads, duplicate it, apply the gaussian blur at 4 and change the blend mode to overlay and merge down and add your drop shadow.  Take ribbon 1 and resize to 85% and place behind your fame and use your pick tool to rotate it a bit. Copy and paste the glitter doodle 2 and resize to 90% and place behind the ribbon.

Now merge visible and resize your tag.
Add your copyright and name and you are done.

Hope you have enjoyed doing my tut
Hugs SharonC