Tuesday, December 11, 2012

New Year Forum Set


 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap MOTP by Lori HERE
dsb flux-bubbles
Font Andes 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 600 x 250
Copy and paste paper #4, then take your crop tool and crop to size.
Resize party clock #3 to 53% and place in center, duplicate twice and move one to the left and one to the right, move both of these below the first frame and erase the part that is showing in the center frame. Merge the 2 outside frames together, then take your free hand selection tool and draw around each outside frame and paste the glitter paper #2, invert and delete.
Copy and paste your tube, resize if needed, I used the half size and resized it to 65%, move below the frame, duplicate and move to top of frame and erase all excess, and sharpen.
Take your magic wand, click inside the center frame, expand by 5, fill with a silver gradient or a color of choice, select none.
Cope and paste the silver streamer, move below all the frames, duplicate and mirror and place in the center of the tag.
Resize the wine glass to 80% and place on each side of the frame.
Resize the lock and key to 50% and place on the glass stem and erase the clasp on top, change the blend mode to Luminance (L), duplicate and mirror.
Being on your paper layer, apply the AAA Foto Frame with the width set to 5 and all other numbers at default.

If you are going to animate, add your copyright and name now.

Then click on the glitter layer, apply dsb flux, bubbles
with these settings
65, 25, 50, 50
take merge to animation shop, come back to psp and undo the bubbles, then change the first number to 67 and apply again, take to animation shop, paste after the current frame.
Come back to psp one more time, undo the bubbles, then apply again with the first number at 69, take to animation and paste after current frame, then select all and change the frame properties to 20.
Test your animation and if happy with it save.

For the Avator
Open a 150 x 150 new image
Copy and paste your tag you just made, resize to 75% and place how you like it, merge visible.
Add the AAA Foto Frame with the width on 5.
Add your copyright and name or initial and you are done.
 
Hope you enjoyed doing this tut.




Monday, December 10, 2012

Happy New Year 2013

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Barbara Jensen.
You need a license to use this art work. Please do not use without a license.
You can find her art at her store HERE

Supplies Needed
I used PSPX...but any of them should work.
Template #3 by Melissa at CMC HERE
WSL Mask 84  HERE
Scrap Happy New Year HERE
Xero Filter- Soft Mood, Clarity and Mistifier (Optional)
EyeCandy4000-Chrome and Glass
Font Simply Glamorous 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*
Open your template, duplicate and close the original.
Delete the credit layer and the lights.

Move the wordart down to the bottom part.

Go to Image, canvas size and change to 800 x 800.
Paste paper #5 and apply your mask, delete and merge group.
Resize the disco ball to 75% and paste.

Raster 2 and copy of raster 2 layers, select all, float, defloat and paste paper #8, invert and delete. 
Take your magic wand and click on each of the light color stripes and add noise at 50%. 
Paste paper #7 on the merged layer, invert and delete.
Paste paper #1 on raster 4 layer of the temp.
Raster 3, the black frame, apply EyeCandy4000-Glass at default setting and add noise at 100%.
Raster 6, select all, new raster layer and fill with black,
do not deselect yet, add your closeup and position, then hit the delete key on your keyboard.
Apply Xero Filter-Soft Mood first, then Mistifier and then Clarity.

Select raster 8, resize your tube some and paste, invert and delete. Change the blend mode to Luminance (L) and apply Xero Filter-Mistifier.

Apply EyeCandy4000-Chrome to the 3 frames, then color them to match your tube.

Raster 7, paste paper #3, invert and delete.

Resize your tube if needed and paste, move below the wordart. Duplicate, gaussian blur at 5, change the blend mode to hard light, merge down.
Apply the Xero Filter-Clarity.

Resize the noise maker to 40%, mirror and move to the left, below the wordart.
Resize the champagne bucket to 50% and place on the right side below the wordart. Resize the glass to 40%, duplicate and place by the bucket.
Take your magic wand, click on each of the letters of the wordart, add a new raster layer and fill with a gold gradient or one of your choice, apply a small bevel effect to it.
Resize the shooting star to 25% and place in the center frame, duplicate and mirror. Duplicate a couple more times and place where you like.
Resize fireworks #2 to 90% and place just above your background layer, duplicate and place again. Resize the rockets to 50% and duplicate and place to your liking.
Paste the berrybush and move to the bottom layer, just above your background layer and place on one side, then duplicate and mirror and move down on the other side, erase the parts that you do not want showing.
Resize the beadedrope to 50% and place where you like it.
Add any other elements that you would like.

Once happy with it all, merge visible and resize your tag.
Add your copyrights and name and that's it.
Hope you enjoyed doing this tut.




Friday, December 7, 2012

I Wish I was Santa

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Template Collab Nicky and Justine #1 at CMC HERE
WSL Mask #84 HERE
Scrap White Christmas by Molemina HERE
Xero Filter- Radiance and Mistifier (Optional)
EyeCandy4000-Chrome and Glass
Font Scripto Pro 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open your template, duplicate and close the original.
You will be doing the select, float, defloat, invert and delete on each of your layers on the template.
Delete the credits and the small green star.

On both the left and right rounded rectangle, paste paper #16, invert and delete.
On the left rounded rectangle, paste one of your closeup and delete the excess, and change the blend mode to overlay or one you prefer. Apply the Xero filter-Clarity.

On both the Huge Grey stars, paste paper #9 and adjust so the snowflakes are showing, then delete.
Apply EyeCandy4000-Chrome to the Star Borders and then apply noise at 50%.
Select the black circle, paste paper #9, invert and delete. Do not deselect yet, paste your closeup, then hit the delete key on your keyboard, select none. Apply the Xero filter-Radiance first and then Mistifier, twice.

Apply EyeCandy4000-Chrome to the big star and adjust, Hue and Saturation, colorize with both numbers set on 255.

On the wordart, I applied EyeCandy4000-Glass at default setting and use the color white.
Paste your tube and move to the right and have the leg part behind the bottom wordart.
Resize element #49 to 50% and place over your closeup layer
Resize cluster elements #6 and #8 to 23%, place #8 below the tube layer and #6 below the Hugh Grey Star layer and adjust to your liking.
Resize element #85 to 5% and place on the left side duplicate and mirror and move back to the left side.

Resize element #90 to 20%, move to bottom layer and up to the left, duplicate, mirror, duplicate, flip, duplicate mirror.

Resize element #26 to 15% and place on the left, erase some of the hanger at the top.

Resize some of the greenery to 15% and duplicate a couple of times and move to the bottom layer and place where you like them.
Place any other elements that you would like.
Once happy, close off any backgrounds used and merge visible.
Resize and add your copyright and name and that's it
Hope you enjoyed doing this tut.




 

Sunday, December 2, 2012

Candy Cane Girl

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zindy S. D. Nielsen.
You need a license to use this art work. Please do not use without a license.
You can find her art at her store HERE

Supplies Needed
I used PSPX...but any of them should work.
 Monti's Blind mask  HERE
Scrap Pink Ice Xmas by Vesta HERE
Xero Filter-Mistifier and Clarity (Optional)
VM Extravaganza-Transmission
Mura Meister-Copies
Font Scriptina Pro 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*
Open a new image 800 x 800, can resize later.

Resize paper #3 and apply Monti's Blind mask.

Take element #18, the snowflake, resize to 20% and apply Mura Meister Filter-Copies, select Encircle and change the top number to 20. Once you have your frame paste, then take your pick tool and bring in the sides of the snowflake circle to fit your frame better, then duplicate, flip and erase the overlapping parts.

Copy and paste Cluster frame #2, resize to 85%.
Take your magic wand and click inside all frames, expand by 15, resize and paste paper #3, invert and delete. Do not deselect yet, paste your closeup, hit the delete key and deselect now.

Apply VM Extravaganza-Transmission to the paper with these settings
20, 0, 10

Apply the Xero Filter-Mistifier to the closeup.
Resize element #17 to 35%, free rotate to the right 15%, and place in the small frame on the right, move below the frame, duplicate and mirror.
Paste element #20 and #21, move to the bottom and below the paper layer.
Copy and paste your tube and place on the left side of the frame, resize if needed.

Resize element #20 to 20% and free rotate to the right 90 and place behind the wordart, Merry Christmas on frame and move out some.
Resize elements #14 and 15 to 20% and place how you like them.
Resize element #27 to 85% and move down to just above the snowflake circle you made.
Once happy with it all, close off any background you used and merge visible. I add the sparkle #3 on top, then I applied the Xero Filter-Clarity to the whole tag.
Resize now and add your copyrights and name and that's it
Hope you have enjoyed doing this tut.



 

Monday, November 26, 2012

All I Want is You

 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Template #2 by Caroline at CMC HERE
 WSL Mask #94  HERE
Scrap To The North Pole by Vaybs HERE
Xero Filter- Soft Mood and Mistifier (Optional)
PhotoEffex-Scanlines
EyeCandy4000-Chrome and Gradient Glow
Font Tagettes 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*
Open your template, duplicate and close the original.
Delete the credit layer and the small stocking.

Go to Image, canvas size and change to 800 x 800.
Rectangle 1 and 2, select all, float, defloat and paste paper #8, invert and delete.
Do this on each of your template layer.
Rectangle 3 layer, paste paper #2, invert and delete.
Moving up to the circle layer, paste element #25 frame and resize to 90%. Take your magic wand, click inside and expand by 2, paste your closeup tube, invert and delete.
Apply the Xero filter-Soft Mood and then Mistifier.
Delete the overlay layer (optional).

Paste element #5 and move below the circle layer.

Select the small circle, add a new layer and fill with a red color
and apply PhotoEffex filter-Scanlines
width at 2 and noise amount at 100

Select the ornament layer and apply EyeCandy 4000 Chrome at default settings and then apply a medium white gradient glow.
On square 1 and 2, select, add a new layer and fill with red again and add the same Scanlines as before, then select all, float, defloat and add your tubes of choice, invert and delete. I mirrored one of mine. Add Xero filter-Porcelain to both.
Paste and resize your tube if needed and place on the left side. Paste element #32, resize to 75% and place in front of your tube.
I used 2 different tubes from Arthur Crowe.
Resize element #39 to 25% and place by the wordart.
Move the wordart where you like and I applied EyeCandy 4000 glass to the black wordart.
Resize element #45 to 35%, flip and place on the small frame, duplicate, mirror and move up on the other frame.
Resize element #48 to 55% and place on the upper right and move to the bottom layer.
Resize element #33 to 55% and place below the wordart layer on the right. Duplicate and move to the top where you like.
Resize element #17 to 55% and place on the bottom layer and place where you like. Resize again to 55% and place on the small frames.

Once happy with it all, merge visible and resize your tag.
Add your copyrights and name and that's it.
Hope you enjoyed doing this tut.





 

Friday, November 23, 2012

Blue Christmas

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zindy S. D. Nielsen.
You need a license to use this art work. Please do not use without a license.
You can find her art at her store HERE

Supplies Needed
I used PSPX...but any of them should work.
 Vix Mask #434  HERE
Scrap Blue Christmas by Nanly HERE
Xero Filter-Mistifier (Optional)
Font Before the Rain 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*
Open a new image 800 x 800, can resize later.

Flood fill with this color or one of your choice, #84bfeb, apply your mask and delete.
Resize element #39, frame to 30%, take your magic wand, click inside, fill with paper of choice, I used #3, invert and delete, paste your closeup and hit the delete key on your keyboard, select none.
Apply the Xero Filter-Mistifier to the closeup tube.
Be sure to resize any of the papers you use, they are big.

Resize element #30 to 25% and place on the right side, below the paper layer of the frame.
Resize element #38 to 15% and place on one side, then duplicate, mirror and make any adjustments.

Copy and paste your tube and place on the left.

Resize elements #3, 7, 26 and 34 to 10% and place how you like them, duplicate one or two of them and place again.

Resize the bow to 5% and place on the different ornaments.

Resize element #6 to 30% place at the bottom, duplicate and move to cover the bottom of the legs of the tube, erase any part you do not want.
Resize element #35 to 25% and place on the right side.
Resize element #36 to 10%, rotate to the right, place below the candle layer and move down a bit, duplicate and move to the left more.
Resize elements #24 and #33 to 15% and place where you like.
Resize element #1 to 15%, free rotate to the left 90 and place behind your tube.
Add any other elements that you would like.
Resize the sparkle element to 25% and place on the top layer.
Once happy with everything, close off your background and merge visible and resize and sharpen.
Add your copyrights and name now and you are all done.
Hope you enjoyed doing this tut.

 

Monday, November 19, 2012

Winter Wishes

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zindy S. D. Nielsen.
You need a license to use this art work. Please do not use without a license.
You can find her art at her store HERE

Supplies Needed
I used PSPX...but any of them should work.
Monti Blind Mask HERE
Scrap Happy Winter by Eileens Design HERE
Xero Filter-Mistifier (Optional)
Font Tagettes
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*
Open a new image 800 x 800, can resize later.


Copy and paste paper #1, go to Adjust, Hue and Saturation, colorize, set both numbers to 0, then apply your mask, delete and merge group.
Resize it later to fit your tag.
Resize element #43 to 50%, duplicate and mirror, merge together, then click with your magic wand, add a new layer and fill with #c7c7c7 and move below. Go to effects, textures, weave, with these settings
1,  10,  1,  color white
Lower the opacity on the frames to 45% and change the blend mode to Luminance (L).

Copy and paste element #10 first, then paste element #9, go to Adjust, Hue and Saturation, colorize and change the numbers to Hue 0 and Saturation 0, do this to both elements.
Take your magic wand, click inside the frame, expand by 5, paste paper, invert and delete, move below the frame layer  and do the same Hue and Saturation to the paper also.
Drop shadow on the frame I used this color #aeaeae.
Resize element #27 to 10% and place in between the spokes of the frame, duplicate them about 4 times, then Adjust and sharpen them.

Paste your tube and move below the frame layer, duplicate and move above frame layer and erase any you don't want over the frame. Apply the Xero Filter-Mistifier to both tubes.

Resize element #3, paste and move to the bottom part of the frame. Resize element #23 to 60% and place on the right side, duplicate and move to the left side and down some, erase any part of the stump showing below the log layer. Duplicate this one again and move behind and up some.
Resize the owl to 30% and place on the right side as if sitting on the stump.
  Resize element #2 to 50% and place by the stump on the right, duplicate, mirror, duplicate, move behind the stump and over a little bit. Duplicate again and resize to 60%, then duplicate as many times as you like and place in different areas.
Resize element #16 to 30%, mirror and take your pick tool to rotate it a bit and place behind the log layer and out to the edge. Duplicate 3 or 4 times and place in different areas.
Resize element #18 to 30% and duplicate, place on the left side. Resize element #24 to 40%, mirror, erase the string and move to the right side.
Resize element #1 to 25% and place on the snow.
Add any other elements that you would like.
I also resized element #12 to 50% and move down a few layers and duplicated.
If happy with everything, close off your background and merge visible and resize now.
Add your copyrights and name and you are done.

Hope you enjoyed doing this tut.