Thursday, July 25, 2013

Biker Night N the City PTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Zlata_M.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD Store HERE
Supplies Needed
I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 City At Night by AmyMarie and
you can purchase it in the Clearance section
at her store HERE
WSL Mask 208  HERE
Font for name Sick Capital Vice 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #16 and apply your mask, delete and merge group.

Paste cityscape 2 and change the blend mode to Luminance (L)

Resize frame 1 to 80% and paste on top of the cityscrape scene.

Paste element #2 and place at the top of the frame and erase the sides hanging down.

Paste wire #3 and move to the bottom of the frame.

Paste Drum #3 on the left side of the frame.

Paste branch #1 on the left side behind the drum layer, duplicate and mirror.

If using the same tube, resize the tube and the bike to 85% and place how you like them.

Resize collar #1 to 50% and place by the drum and erase the back part to make it look like it is over the drum.

Resize the cat to 40% and place sitting on the drum.

Resize bomb #2 to 40% and place on the right side.
Resize the bracelet #2 to 40% and place on the right side behind the bomb layer.

Resize element #13 to 50% and place by the bomb and bracelet layer.

Place the moon on the right side, just above the mask layer.

Paste the fence just below the frame layer.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and
add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Wednesday, July 24, 2013

Just a Country Girl PTU

 

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Elias Chatzoudis.
You need a license to use this art work. Please do not use without a license.
You can find this art at Elias's Store   HERE
Supplies Needed
I used PSPX...but any of them should work.
I am using an awesome Scrap kit
 Down Home Girl by AmyMarie and
you can purchase it at her store HERE
Gems Mask 37  HERE
Font for name Coolock Black 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #10, resize your mask to 120% and then apply to your paper and delete, merge group.

Paste element #33, free rotate to the right or left 90 degrees, duplicate and mirror, erase the center parts of both, then merge these 2 together.
Click inside with your magic wand, expand by 5 and paste your closeup, invert and delete, change the blend mode to soft light.

Paste element #18, move below the mask layer, duplicate, mirror, duplicate, flip, duplicate mirror, merge these 4 layers together.

Paste element #35 below the frame layer and adjust how you like it.

Paste your tube layer and resize to 90%, if using the same tube, and place on the left side of the frame.

Place element #108 on one side, duplicate and mirror and merge these two layers together.

Paste and resize element #87 to 65% and place on one side, duplicate a couple more times and place how you like them
Paste and resize #65 to 50%, duplicate a few times and arrange how you like them.

Paste layer 42 on the right side.

Resize element #90 to 70% and place below the railroad track layer and on the right side.

Resize element #60 to 50% and place by the tree, duplicate a couple of times and move them around to your liking.

Resize element #30 to 50% and place on the right side below the car layer and take your pick tool and rotate it a bit.

Paste element #59 and place on the left behind your tube layer, dupilcate and move up a bit.

resize the tires to 50% and move to the right below the tree layer.

Resize the cat to 45% and place in between the rocks on the bottom.


Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and
add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Tuesday, July 23, 2013

Pirate Jack FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Zlata_M.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD in the Exclusive  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Pirates Caribbean by Suzi HERE
WSL Mask 84 HERE
Xero Filter-Soft Mood
Font for name Meddon 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.
Paste paper #7 or one of choice and apply your mask, delete and merge group.

Paste frame #6 and resize to 85%, click inside with your magic wand, expand by 2, paste element #13
and move below the frame layer to the right.
Paste the closeup tube and move to the left side, invert and being on each layer delete and select none.
Duplicate your tube layer, apply Xero Filter-Soft Mood, change the blend mode to soft light and merge down.
Duplicate the frame layer, change the blend mode to Burn and lower the opacity to 50% or to what you like the looks of.

Paste element #44 on the right side.

Paste and resize element #27 to 75% and place on the right side.
Paste element #29 and resize to 75% and place how you like.

Resize element #70 to 50%, mirror and place on the left side.

Resize element #32 to 75% and place on the left side.

Resize element #15 and #16 to 50% and place on the left below the coin layer.
resize element #25 to 75% and place how you like it.

Mirror and place element #56 on the left side between the bottle layers.

Resize element #8 to 50% and place below the coin layer toward the left side.

Resize element #78 to 40% and place at the top of the frame, duplicate twice and place one on each side of the frame.

Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and

add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Monday, July 22, 2013

Pirate of the Sea FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Diana Gali.
You need a license to use this art work. Please do not use without a license.
You can find this art at SATC Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Pirates Caribbean by Suzi HERE
WSL Mask 84 HERE
Xero Filter-Porcelain (Optional)
Font for name Meddon 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize later.

Paste paper #7 and apply your mask, invert and delete.
Resize the mask larger to 112%

Resize frame #1 to 75% and paste on your new image and sharpen once.

Click inside with your magic wand and expand by 5, paste paper #4, invert and delete, move below the frame layer, select none.

Resize element #79 to 60%, place on the paper layer and move a little to the right, change the blend mode to hard light.

Resize element #6 to 50% and place on the right and toward the middle.
Resize element #29 to 50% and place in front of the crates.

Resize element #7 to 50% and place on the right.

Resize element #66 to 40% and place on the right side behind the chest.
Apply Xero Filter-Porcelain

Resize element #16 to 40% and place below the coin layer in the center.

Resize element #65 to 25% and place by the bottle.
Apply Xero Filter-Porcelain

If using the same tube I am resize to 75% and place on the left side.

Resize element #13 to 40% and place on the left side behind your tube layer.

Paste element #80 over the bottom part of your tube layer.

Resize element #76 to 30%, free rotate to the left at 30 degrees and place on the left side.

Paste elment #51 on the right side behind the chest layer.

Go back to your element #66 the first monkey, duplicate, resize to 80% and place behind the tree, duplicate and move above the tree and erase part of the body showing over the truck of the tree.
Apply Xero Filter-Porcelain.

Resize element #43 to 70% and place on the left side behind your tube layer.

Resize element #70 to 35% and place on the right behind the chest and adjust how you like it.

Resize element #72 to 50% and place on the left side below your tube layer, duplicate, mirror and take your pick tool and rotate it a bit.

Resize element #50 to 75% and place below the mask layer on the left side, duplicate, mirror and move lower on the right side.
Add any other elements that you would like, once happy with it all, close off any background being used and merge visible.
Resize your tag and

add all copyrights to your tag and your name
and that is it.

Hope you enjoyed doing this tut.

Friday, July 12, 2013

The Leather Look FTU

 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at his Store HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap BQ Blog Train Inspired by PINUPTOONS by Niqui's Designs  HERE
WSL Mask 84 by HERE
Xero Filter-Radiance
Font akaDora for name 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you are use to using, can alway resize later.
Paste paper #2 or one of choice and apply your mask and delete.

Paste element #11, click inside with your magic wand and expand by 15, paste paper #8, invert and delete. Move below the frame layer. Do not deselect yet, mirror your tube first before you paste it, then paste your second bigger tube, and delete. Apply Xero Filter-Radiance

Paste element #26

Paste element #16 and resize to 95% and place below the mask layer on one side of the frame, duplicate and mirror.

Paste element #2 and move to just above the mask layer.
If using the same tube as I am, resize to 75% and place on the right side and adjust element #2 now under your tube.

Resize element #17 to 50% and place on the left side, just below the tube layer. Sharpen a couple of times, then duplicate and resize to 75% and move up some on the left side.
Resize element #3 to 50% and place on the left side and sharpen.

Resize element #23 to 50% and place on top of element #17 on the left side.

Resize element #29 to 50% and move below your tube layer on the right and move to how you like it and erase the parts you do not want.
Duplicate and mirror and move to the upper left and erase the parts you do not want showing again.

Resize element #13 to 75% and place behind your tube, free rotate to the right 90 degrees and adjust behind your tube.
Duplicate, mirror and resize to 75% and place where you like on the left side.

Resize element #27 to 75% and place at the bottom and erase any part you do not want showing.

Resize the butterfly to 35%, mirror and place at the upper left corner of the frame. Duplicate and resize again and place where you like.
Add any other elements you would like.

Resize your tag and add all copyrights
Add your name and that is it.

On the name I added EyeCandy4000-Chrome and recolored, then selected, expanded by 2, added a new layer and fill with black and moved below.

Hope you enjoyed doing this tut.

Sunday, July 7, 2013

Faerie Land FTU

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Elias Chatzoudis.
You need a license to use this art work. Please do not use without a license.
You can find this art at his store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap El Bosque Animado by Bel Scraps HERE
Moonbeams and Spiderwbs Mask 45  HERE
Xero Filter-Soft Mood, Mistifier and Clarity
Font ScriptinaPro for name 

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 can resize later.
Paste paper #5 and apply your mask and delete.
Paste paper #4 and apply the mask again, delete and flip, merge down.

Resize frame Marco to 35% and paste on your mask layer.
Duplicate, resize to 80% and move to the left and below the first frame layer and erase the part showing inside, duplicate and mirror, making any adjustments at this time.
Close off your mask layer and
merge these 3 frame layers together.

Paster your close up tube and move below the frame layer, take your magic wand and click inside, expand by 2, invert and delete.
Apply the xero filter-Soft Mood and then Mistifier and change the haziness to 200. Duplicate, gaussian blur at 4 and change the blend mode to screen, merge down.
Then apply xero filter-Clarity

Resize herbia2 to 25% and place at the bottom of the frame.

Resize herbia  to 25% place on one side, duplicate and mirror.
Resize herbia 4 to 35% and duplicate a couple of time and place how you like them.

Resize and paste your tube and move to the right a bit.

Resize flores 2 to 15% and place below the herbia layers and duplicate a couple of times and place how you like.

Resize Flors3 to 15% and place where you like, duplicate a couple of times.

Resize the caracol to 10% and place on one side duplicate, mirror and place by the first one.
Resize the Flores to 40% and place at the bottom.

Resize Brillos 2 paste and move to the left below the tube layer, erase the one flower over the face, then duplicate, mirror and move above the tube layer and adjust to your liking.
Resize the Charco to 25% and place below the tube layer on the herbias, duplicate and merge down.

Resize the Banco to 25% and place on the left side and moving below some of the herbia layers, duplicate and mirror.

Resize the Piedra to 10% and place below the tube layer on the right side.

Resize Seta2 to 5% and dulicate a couple of times and place them where you like.
Then go back to the orginial and unsize it and then resize to 10% and place in other areas, below the bench layer this time.

Resize the bottle to 10%, free rotate to the right and place on the left side below the snails...

Resize Hoja 2 to 10% and being on the top layer, duplicate a few times and place in different areas.
Resize the Rama to 30% and being above the mask layer, place how you like, duplicate and mirror and again place how you like it.

Add any other elements that you would like, once happy, close off any background you used and merge visible.

Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.

Friday, June 21, 2013

It's My Party FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Barbara Jensen.
You need a license to use this art work. Please do not use without a license.
You can find her art at her Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Happy Birthday by Inzpired Creationz  HERE
Template #272 by Millie HERE
Monti's Blind Mask HERE
EyeCandy4000-Gradient Glow
Font Great Vibes for name 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Hold the shift key and hit the D to duplicate the template and close the orginial one.
Delete the credits and layer #7

Paste paper #1 and apply your mask, delete and merge group.

Select Layer 5 on the template, select all, float, defloat, paste paper #5, invert and delete. Do not deselect yet, paste your closeup tube and place where you like it, then hit the delete key on your keyboard, select none.
Duplicate your closeup, apply gaussian blur at 5, then change the blend mode to overlay or one that you prefer, merge down.
Now change the blend mode to Luminance (L).
Select layer #5 again, add a new layer fill with your pink color, contract by 5, delete. Add noise at 100% to this circle now.

Select layer 4 of the template and paste paper #2, adjust where you want it, invert and delete.
Add EyeCandy4000-Gradient Glow, set on the fat gradient and color white.

Layer 3 of the template, paste paper #1 and adjust, invert and delete.
Apply the same gradient glow.

Layer #2, select all, float, defloat, add a new raster layer and make a gradient using the pink from the dress for the forground and white for the background, angle 45, repeat 3.
Then go to Effects, textures effects, weave with these settings
1, 10, 10, both colors white and fill the gap checked.
Apply the gradient glow to this one also.

Select layer one and change the foreground color to #52b989 and make a gradient with this one, add a new layer and fill with this color.
Add the same weave effect as before. Apply the gradient glow again.
Copy and paste your tube  and move to the right a little.
Erase some of the legs. I do not like when they are just cut off.

Move the wordart to the upper left a bit, then select all, float, defloat, add a new raster layer and fill with your pink color.
Then expand by 2 and add a new layer, fill with white and move below, select none.
Add the same weave effect to the pink wordart and merge the white with the pink wordart

Resize present 1 to 45% and place on the left side.
Resize the shoe to 35% and place on the left side, duplicate, mirror and move below the first shoe and adjust to your liking.
Resize balloons 3 to 65% and place to the right behind your tube.

Resize the Tiara to 50% and free rotate to the right by 15

Paste ribbon #1 and move down to just above the mask layer.

Resize cupcake one to 40% and place behind the tube layer on the right. Duplicate, resize to 75% and place in front of the tube.

Resize the lips to 20% and mirror and place on the left side.

Resize the flower to 75% and place behind the present on the left, duplicate and move behind the tube on the right.

Add any other elements that you would like.


Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.