Sunday, January 15, 2017

Love Forever 3 Piece Set




This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Jamie Kidd.
You need a license to use this art work. Please do not use without a license.
The tube I am using is called Misty 65-3.
 You can find this art at the CDO store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Radiant Orchid by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
Monti Blind Mask HERE 
Check out the rest of the blog HERE
Filters
AAAFrames-Foto Frame
Xero -Soft Vignette and Fritillary

Font of Choice, I used Billion Stars

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste element 37, resize to 90%.

Paste element 5, resize to 50%, move to the left and up some, duplicate, move to the right and down some.
I didn't merge the frame because you might want to readjust them later, so take your magic wand, click inside each frame expand by 5, paste paper 17, invert, delete, move below the tubes,
mirror your tube for one of the frames, paste the tube in each frame, then delete each tube, select none.
Duplicate each tube, go to Adjust, Blur, Gaussian Blur, number on 4, change the blend mode to
hard light, merge each tube down with the other. Then apply Xero filter-Soft Vignette with these settings
Elliptical, Foreground color
Diagonal dots
1, 0, 0, 255
Paste your tube on top of the frames, adjust.

Resize element 85 to 90%, go to Adjust, Hue and Saturation to change the color, use
these numbers
H 208, S 175
Paste element 43 on the glitter layer, resize to 95, duplicate, mirror.

Resize element 77 to 50%, paste on one side at the bottom of the tube, duplicate, mirror, erase the flower on the lower tube face.
Resize element 30 to 30%, paste below the flower on the left, duplicate, resize to 85%, move down a bit.
Resize element 67 to 55%, free rotate to the right at 90 degrees, paste below the flower on the right, duplicate, mirror.
Resize element 100 to 35%, paste at the bottom being on the top layer, duplicate twice, moving these below the flower layers on each end.

Paste element 78 on the bottom layer, resize a bit larger to 105%.
Paste element 34 below that layer on the right, adjust to how you like it, duplicate, mirror, again adjust to your liking.
Resize element 79 to 20%, free rotate to the left at 10 degrees, paste below the top flower layer at the bottom.
Resize element 80 to 20%, paste by the love sign.
Resize element 51 to 15%, mirror, paste at the bottom left side.

If you would like to do a Signature and Avator, do not merge your tag yet.
Add any other elements you would like at this time.

Close off the tubes, frames and the background stuff, you want from the clock and above to copy merged.
Open a new layer 600 x 300, paste your merged layer, resize to 75%.
Go back to your main tag, open all the layers again, then select the purple flower on the bottom layer, paste, resize to 75%, free rotate to the left, duplicate, mirror, move both below the merged layer, adjust, erase the part you don't want showing, duplicate, free rotate to the right at 90, adjust, erase, duplicate, mirror, adjust and erase any other parts.
Add a new layer, fill with #f2e5f5, add a mask of choice, I used Monti Blind mask.
Resize element 51 to 15%, mirror, paste at the bottom left side.

Avator
A size that is allowed for your group or forum,
mine is 200 x 200, fill with  #f2e5f5, apply Xero filter, fritillary with these settings
5, 30, 68, 46
Copy your Signature tag merged and paste, resize to 85%, move how you like the looks, then add a frame of choice.
I used AAA Frames-Foto Frame width on 3 and all other numbers left as is.
Be sure to add your copyright to all tags and name.

Crop your main tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Friday, January 13, 2017

Country Shab PTU Clusters Show Off

Showing off some tags I made using PTU Clusters made by Lady Dragus
Using the beautiful, awesome kit COUNTRY SHAB by Irish Princess Designs
You will want to purchase these Clusters for your tagging fun.

Go check them out and check out all the other awesome PTU Clusters while you are there.
Artist I used were Steve Baier, Nocturne and Misticheskaya



You can purchase these CLUSTERS-HERE and HERE
and KIT at one of these stores
Irish Princess Designs  HERE
  HERE, HERE, HERE

Country Shab Beauty


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Nocturne.
You need a license to use this art work. Please do not use without a license.
The tube I am using is called Sweet Pink.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Country Shab by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here 
 DD Mask  NVM_3  HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle

Font of Choice, I used Blacksword

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 15, apply your mask, delete, merge group.
Paste element 49, select all, float, defloat, mirror your tube, paste your tube on the left with
the face on the clock face, invert, delete. select none, change the blend mode to hard light.

Resize element 48 to 40%, paste on the mask layer, apply Mura Meister Copies-Encircle, change the first number to 30.
Paste element 11 on top of that layer.
Resize element 78 to 40%, apply Mura Meister Copies-Encircle, change the first number to 16.
place that on top of the lace doily.
Resize element 46 to 25%, apply Mura Meister Copies-Encircle, change the first number to 12,
paste on top of the last circle you made.

Resize your tube to 45%, paste on the right side.

Resize element 66 to 60%, paste on the left on the clock layer, free rotate to the left at 20 degrees, duplicate, mirror, move below your tube layer.
Resize element 89 to 40%, paste below the tube layer on the right, free rotate to the right at 25 degrees.
Resize element 88 to 75%, paste below the tube layer.
Resize element 18 to 65%, place on the left side.
Resize element 92 to 45%, mirror, place on the left below the swirly element layer.
Resize element 3 to 45%, paste below the paper holders on each side.
Resize element 44 to 50%, paste on the straight edge of the legs and erase the hearts to the left.
Resize element 28 to 25%, paste below the vase on the left.
Resize element 84 to 30%, place at the bottom about center, below the hearts covering the legs.

Resize element 5 to 50%, paste below the flowers on the left and just having the green
leaves showing mainly, duplicate, mirror, adjust, duplicate again, move to the center more,
then back to the ones on the ends, duplicate each, move up some, erasing all but the green you
would like showing.
Being on the top layer, paste element 94.
Resize element 41 to 15%, place at the bottom, duplicate a couple of times and move where you like.
Resize element 85 to 40%, place on the jar layer.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Tuesday, January 10, 2017

Poppy PTU Clusters by Lady Dragus

Showing off some tags I made using PTU Clusters made by Lady Dragus
Using the beautiful, awesome kit Poppy by Irish Princess Designs
You will want to purchase these Clusters for your tagging fun.

Go check them out and check out all the other awesome PTU Clusters while you are there.
Artist I used were Lysisange, Alicia Mujica and Laguna


You can purchase these CLUSTERS-HERE and HERE
and KIT at one of these stores
Irish Princess Designs  HERE
  HERE, HERE, HERE



Sunday, January 8, 2017

Cupcake Cutie


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Anna Marine.
You need a license to use this art work. Please do not use without a license.
The tube I am using is 47-3.
 You can find this art at the CDO store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Cherry Cuppie by Irish Princess Designs  HERE
You can also find this kit at one of these stores  here, here, here
Allison's Addictions Template_5 HERE
Check out the rest of the blog HERE 
 DD VMask_7  HERE
Check out the rest of the blog HERE
Filters
Screen Works-Light Gauze

Font of Choice, I used Blacksword

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*
Open your template, hold the shift key and hit the letter d to duplicate, close the original,
delete the credits.
Paste paper 11, apply your mask, delete, merge group, resize mask to 95%.
Paste frame 2 on the top layer, take your pick tool and pull in the sides of the frame to fit the pink circle better.
Click inside with your magic wand, expand by 5, paste paper 12, invert, delete, move below the frame, paste your close up tube, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussina blur number on 4, change the blend mode to screen, then apply the Screen Works filter-Light Gauze, merge down.
Mirror your other tube, paste on top of the frame on the left.
Select the bottom middle circle, float, defloat, paste paper 3, invert, delete, also delete the template layers as you go along.
Do the same with the upper middle circle with the same paper.
You can leave the dash circles as is or add noise if you like.
The upper left, rect, right upper rect, lower left and right, paste the same paper in each,
or if you like you could use a different one on each, I used paper 11.
The left upper and right lower circle rect paste paper 2, invert, delete, select none on both.
Resize cupcakes to 30%, place both in the center how you like.
Resize the bling to 70%, paste on the mask layer at the upper right, duplicate, mirror, flip.
Resize the candy to 35%, place on the right below the cupcakes, duplicate, move one out more.
Resize the cherries to 35%, paste at the bottom of the tube legs to cover the straight edge.
Resize the stars to 40%, paste on the right below the candy.
Paste the sparkles on the top layer, erase any part on the face you don't like.
Paste the scatter at the lower left on the mask layer, duplicate, flip, duplicate, mirror, duplicate, flip.
Resize the cake pops to 50%, place on the right below the stars layer, duplicate, mirror,
move below the tube layer and down a bit.
Resize the lipstick to 40%, place on the right above the candy.
Resize the cocktail to 45%, place in front of the cherries on the left.
Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Wednesday, January 4, 2017

Ice Queen



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Tony Tzanoukakis.
You need a license to use this art work. Please do not use without a license.
The tube I am using is called Ice Queen.
 You can find this art at his store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Ice Queen by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here 
 DD Mask NWM 2  HERE
Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 6, apply your mask, delete, merge group.
Resize your tube to 35%, if using the same one, paste.

Resize element 80 to 50%, paste below the tube on the left like she is sitting on it, duplicate, mirror, adjust.
Erase the straight edge part of the tube at the bottom.

Paste element 27 below the frozen ice cubes.
Resize element 5, paste below the frozen grass on the left, duplicate, move to the right side.

Paste element 25 on the mask layer.

Resize element 24 to 75%, paste on the left and down some, duplicate, mirror, move up a bit.
Paste element 76 on the castle, add your drop shadow so you can see the parts off the castle, erase those parts.
Paste element 83 at the top below the castle layer.
Paste element 37 on the right on the mask layer, move out some, erasing the bottom shadow part at the edge, duplicate, mirror.

Paste element 15 on the bottom of the tube layer
Resize element 98 tp 30%, duplicate 3 times, mirror one and arrange how you like at the bottom of the tube layer.
Duplicate one of the flowers, move to the right and below the greenery.

Resize element 74 to 20%, paste on the left at the bottom, duplicate, resize this one to 90%, move over a bit.
Resize element 9 to 20%, place where you like at the bottom.
Resize element 81 to 30%, duplicate a couple of times, place how you like at the bottom.

Resize element 23 to 30%, paste below the crown at the bottom.
Resize element 80 to 20%, paste below the rabbit layer, duplicate, mirror.

Paste element 59 on the top layer, adjust.

Resize element 39 to 95%, paste just above the tube layer at the bottom, duplicate, mirror, erase any part you don't want showing.

Resize element 73 to 30%, paste above the tube layer on one side, duplicate, mirror, adjust.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Monday, January 2, 2017

A Night to Remember


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Alex Prihodko.
You need a license to use this art work. Please do not use without a license.
The tube I am using is called Blossom Fairy.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Champagne & Glitter by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here 
 DD Mask NWM 2  HERE
Check out the rest of the blog HERE

Font of Choice, I used Amarillo

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 15, apply your mask, delete, merge group.

Paste element 43, free rotate to the right at 90 degrees, click inside with your magic wand, expand by 5, paste paper 12, adjust a bit down some, invert, delete, move below the frame.
Mirror your tube, paste, delete, select none, duplicate your tube, go to Adjust, Blur, Gaussian blur on 4, change the blend mode to screen, merge down.

Resize your tube to 45%, paste off to the right more.

Resize element 17 to 35%, paste above the tube layer on the right duplicate, mirror, move back to the right.

Resize element 61 to 40%, paste by the boots on the right.
Paste element 29 on the right just above the mask layer, duplicate, move to the left and down.

Paste element 92 at the upper left above the mask layer, duplicate, mirror, flip, adjust.
Paste element 16 below the glitter ball layer at the bottom.
Paste element 57 below the tube layer at the upper right on the frame, duplicate, flip, mirror.

Paste element 39 on the right just above the glitter ball.
Resize element 67 to 50%, paste on the left at the bottom.
Resize element 10 to 65%, paste below the telephone on the left.
Resize element 70 to 35%, place below the phone.
Resize element 94 to 45%, paste below the champagne bottle on the left.
Resize element 99 to 65%, paste below the watch on the left.
Resize element 42 to 40%, paste on the left below the champagne bottle.
Paste element 27 at the upper left below the glitter ball.

Paste element 82 on the circle layer at the upper left, duplicate, merge down, duplicate, mirror, flip and adjust.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.