All I Want is You

 

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.
Template #2 by Caroline at CMC HERE

 WSL Mask #94  HERE

Scrap To The North Pole by Vaybs HERE
Xero Filter- Soft Mood and Mistifier (Optional)
PhotoEffex-Scanlines
EyeCandy4000-Chrome and Gradient Glow
Font Tagettes 

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*

Open your template, duplicate and close the original.
Delete the credit layer and the small stocking.

Go to Image, canvas size and change to 800 x 800.
Rectangle 1 and 2, select all, float, defloat and paste paper #8, invert and delete.
Do this on each of your template layer.
Rectangle 3 layer, paste paper #2, invert and delete.
Moving up to the circle layer, paste element #25 frame and resize to 90%. Take your magic wand, click inside and expand by 2, paste your closeup tube, invert and delete.
Apply the Xero filter-Soft Mood and then Mistifier.
Delete the overlay layer (optional).

Paste element #5 and move below the circle layer.

Select the small circle, add a new layer and fill with a red color
and apply PhotoEffex filter-Scanlines
width at 2 and noise amount at 100

Select the ornament layer and apply EyeCandy 4000 Chrome at default settings and then apply a medium white gradient glow.
On square 1 and 2, select, add a new layer and fill with red again and add the same Scanlines as before, then select all, float, defloat and add your tubes of choice, invert and delete. I mirrored one of mine. Add Xero filter-Porcelain to both.
Paste and resize your tube if needed and place on the left side. Paste element #32, resize to 75% and place in front of your tube.
I used 2 different tubes from Arthur Crowe.
Resize element #39 to 25% and place by the wordart.
Move the wordart where you like and I applied EyeCandy 4000 glass to the black wordart.
Resize element #45 to 35%, flip and place on the small frame, duplicate, mirror and move up on the other frame.
Resize element #48 to 55% and place on the upper right and move to the bottom layer.
Resize element #33 to 55% and place below the wordart layer on the right. Duplicate and move to the top where you like.
Resize element #17 to 55% and place on the bottom layer and place where you like. Resize again to 55% and place on the small frames.

Once happy with it all, merge visible and resize your tag.
Add your copyrights and name and that's it.
Hope you enjoyed doing this tut.





 

Blue Christmas

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Zindy S. D. Nielsen.

You need a license to use this art work. Please do not use without a license.

You can find her art at her store HERE

Supplies Needed

I used PSPX...but any of them should work.

 Vix Mask #434  HERE

Scrap Blue Christmas by Nanly HERE
Xero Filter-Mistifier (Optional)

Font Before the Rain 

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 800 x 800, can resize later.

Flood fill with this color or one of your choice, #84bfeb, apply your mask and delete.
Resize element #39, frame to 30%, take your magic wand, click inside, fill with paper of choice, I used #3, invert and delete, paste your closeup and hit the delete key on your keyboard, select none.
Apply the Xero Filter-Mistifier to the closeup tube.
Be sure to resize any of the papers you use, they are big.

Resize element #30 to 25% and place on the right side, below the paper layer of the frame.
Resize element #38 to 15% and place on one side, then duplicate, mirror and make any adjustments.

Copy and paste your tube and place on the left.

Resize elements #3, 7, 26 and 34 to 10% and place how you like them, duplicate one or two of them and place again.

Resize the bow to 5% and place on the different ornaments.

Resize element #6 to 30% place at the bottom, duplicate and move to cover the bottom of the legs of the tube, erase any part you do not want.
Resize element #35 to 25% and place on the right side.
Resize element #36 to 10%, rotate to the right, place below the candle layer and move down a bit, duplicate and move to the left more.
Resize elements #24 and #33 to 15% and place where you like.
Resize element #1 to 15%, free rotate to the left 90 and place behind your tube.
Add any other elements that you would like.
Resize the sparkle element to 25% and place on the top layer.
Once happy with everything, close off your background and merge visible and resize and sharpen.
Add your copyrights and name now and you are all done.
Hope you enjoyed doing this tut.

 

Winter Wishes

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Zindy S. D. Nielsen.

You need a license to use this art work. Please do not use without a license.

You can find her art at her store HERE

Supplies Needed

I used PSPX...but any of them should work.

Monti Blind Mask HERE

Scrap Happy Winter by Eileens Design HERE
Xero Filter-Mistifier (Optional)

Font Tagettes

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 800 x 800, can resize later.


Copy and paste paper #1, go to Adjust, Hue and Saturation, colorize, set both numbers to 0, then apply your mask, delete and merge group.
Resize it later to fit your tag.
Resize element #43 to 50%, duplicate and mirror, merge together, then click with your magic wand, add a new layer and fill with #c7c7c7 and move below. Go to effects, textures, weave, with these settings
1,  10,  1,  color white
Lower the opacity on the frames to 45% and change the blend mode to Luminance (L).

Copy and paste element #10 first, then paste element #9, go to Adjust, Hue and Saturation, colorize and change the numbers to Hue 0 and Saturation 0, do this to both elements.
Take your magic wand, click inside the frame, expand by 5, paste paper, invert and delete, move below the frame layer  and do the same Hue and Saturation to the paper also.
Drop shadow on the frame I used this color #aeaeae.
Resize element #27 to 10% and place in between the spokes of the frame, duplicate them about 4 times, then Adjust and sharpen them.

Paste your tube and move below the frame layer, duplicate and move above frame layer and erase any you don't want over the frame. Apply the Xero Filter-Mistifier to both tubes.

Resize element #3, paste and move to the bottom part of the frame. Resize element #23 to 60% and place on the right side, duplicate and move to the left side and down some, erase any part of the stump showing below the log layer. Duplicate this one again and move behind and up some.
Resize the owl to 30% and place on the right side as if sitting on the stump.
  Resize element #2 to 50% and place by the stump on the right, duplicate, mirror, duplicate, move behind the stump and over a little bit. Duplicate again and resize to 60%, then duplicate as many times as you like and place in different areas.
Resize element #16 to 30%, mirror and take your pick tool to rotate it a bit and place behind the log layer and out to the edge. Duplicate 3 or 4 times and place in different areas.
Resize element #18 to 30% and duplicate, place on the left side. Resize element #24 to 40%, mirror, erase the string and move to the right side.
Resize element #1 to 25% and place on the snow.
Add any other elements that you would like.
I also resized element #12 to 50% and move down a few layers and duplicated.
If happy with everything, close off your background and merge visible and resize now.
Add your copyrights and name and you are done.

Hope you enjoyed doing this tut.


 

Pink Ice FTU

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ismael Rac.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

 Monti Blind Mas  HERE

Scrap Pink Christmas by Chatita's Creationz HERE
Xero Filter-Moodlight and Mistifier (Optional)
Mura Meister-Copies

Font Satisfaction

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 800 x 800, can resize later.
This is an easy one.

Copy and paste paper #2 and apply your mask, delete and merge group.
Resize it later to fit your tag.
Paste deco 2 and resize larger to 108%, adjust into place.

Resize the Circle frame to 85%, take your magic wand, click inside, expand by 3, paste paper #5, invert and delete. Move below the frame layer.
Being on your top layer now, resize the string of lights to 50% and erase the string on the edges on both sides. Resize the pink mistletoe to 30% and place almost to the end on both sides of the lights and place one in the middle, merge these together, then apply Mura Meister, Copies-Encircle with the default settings, adjust on your circle frame. Apply a dark Pink drop shadow on this.
Resize the snowflake glitter to 40%, apply the Mura Meister, Copies-Encircle to this also, sharpen twice and place on top of the light and mistletoe layer. Add the same dark Pink drop shadow.
Add your tube, resize if needed, move down below the frame layer, duplicate and bring to the top and erase what parts you don't want showing outside the frame.
 
Apply the Xero Filter-Moodlight to both tubes, check Light 1, and Extreme and the color to #ba548e, leave all else at default settings. Apply Xero Filter- Mistifier on the top tube.

Resize the present, (duplicating the present once) and the bear and mouse all to 40% and place how you like them.  Resize the candy cane to 30% and duplicate, mirror and rotate a bit with your pick tool, merge down and add your dark pink drop shadow.

Resize the star to 30% and place by the candy canes, duplicate and move up some and behind the candy canes.
Resize the deco 3 ornament to 15% and place by the bear. Resize one of the cupcakes to 20% and place by the presents.
Resize one of the Christmas tags to 50%, place by the bow on the present, mirror one of them and place on the other, erase the string on them.

Resize deco #6 to 20% and place on the frame where you like the looks of them.

Add any other elements you would like, or duplicate some on the tag already and move around.
Once happy with it all, close off any background you were using and merge visible and resize.
Add your copyrights and any wordart and name and that's it.

Hope you have enjoyed doing this tut.


 

Winter Fun FTU

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ismael Rac.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

WSL_Mask 116  HERE

Scrap by Inzpired Creationz
 called Misfit Chill, can get it at CM HERE
Be sure to visit ICZ blog HERE
Winter photo of choice or get one from HERE
Xero Filter-Clarity (Optional)

Font WhisperWrite

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 800 x 800, can resize later.
This is an easy one.

Copy and paste paper #2 and apply your mask, delete and merge group.
Resize it later to fit your tag.
I then recolored it using my Change to Target tool with this color #b8e4f9.
I used a winter photo from sxc 
Select all, float defloat, add a new raster layer and paste your photo into selection, select none.
Change the blend mode to screen, merge down and I apply the Xero filter, clarity twice.
Copy and paste the tree, then duplicate it 4 more times, or more if you prefer. Place where you would like and then merge them all together. You will have to erase some of the bottoms on some of them. Go to Adjust and sharpen twice.
Apply a drop shadow with a dark color from your tube instead of black on the trees.
Copy and paste your tube and resize as needed and place in the center.
Copy and paste the snow and move to the bottom.
Copy and paste the snowboard, resize to 50% and place toward the left side. Resize the boot to 25% place on the snowboard and duplicate and mirror and adjust to your liking.
Resize the bunny to 50% and place on the right side, duplicate and resize to 60%, place by the first bunny, duplicate again and mirror for the other side.
Resize both the beanie and the glove to 25% and place on the right side. Rotate the glove 90 to the left, duplicate and adjust. Resize lolli 1 to 25% and place on the left behind the beanie, duplicate and rotate it to the right about 5 or 10%.
Resize the ice patch to 80% and place it just above the tree layer on the left, duplicate, mirror and move up just a bit.
Resize the banner to 75% and place below the tree layer.
Resize the skull to 30# and place at the top edge of string on banner, duplicate and mirror.
Being on the top layer now add the snow.

Once happy with it all close off your background if using one, then merge visible and resize.
Now add your copyrights and name and any wordart you would like to add.
Save your tag as a png and you are done.

Hope you enjoyed doing this tut.

 

Country Girl Christmas FTU

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.

You need a license to use this art work. Please do not use without a license.

I purchased mine when he was with PTE but they have since closed.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Christmas in Norway

by Eileens Design  HERE

Monti Mask Blind 1 HERE
Xero Filter-Porcelain and Clarity

Font Tagettes

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, size of choice
I usually make mine 800 x 800 and resize later.

Copy and paste element #52, the heart frame, take your magic wand, click inside, expand by 15, paste paper #1, invert and delete, move below your frame.
Resize element #27 to 50%, place on the paper layer, duplicate, mirror, erase any showing outside the frame area.
Duplicate again and move below the paper layer and move to let some of it show paste the frame layer, duplicate and mirror.

Paste your tube, resize if needed, move below the frame, duplicate, move above the frame and erase any over the frame. Apply the Xero filter-Porcelain to both tubes first, then Clarity.

Paste element #37, flip, rotate to the left or right 10%, duplicate and mirror, adjust to your liking.
Erase the square edges on both pieces and erase some from the bottom, then merge visible and move to the bottom layer.

Paste element #33, flip, position how you like, duplicate and mirror and adjust on the other side, merge down.

Being on the frame layer, paste element #33 at the bottom part of the frame.
Resize element #2 to 75% and place at the bottom of the frame. Resize element #71 to 30%, rotate to the right 10% and place behind the ribbon layer merry christmas.

Resize element #36 to 30% and place on the left side behind the merry christmas layer, duplicate and mirror.
Resize element #32 to 35% and place on the left side behind the box.

Resize element #5 to 60% and place on the right side above the merry christmas layer. Resize element #64 to 50% and place on the frame, duplicate and mirror and move to the lower left side, erase the string on this one.
Resize element #54 to 25% and place on the right side.
Resize element #6 to 30% and place on the left side on the frame, duplicate and move down some.
Resize element #18 to 60%, place on one side, duplicate and mirror to the other side.
Resize element #17 to 40%, place on the left side, move down to just above the first paper layer, duplicate and mirror.
Duplicate a couple more times, flip and place where some will show just below the merry christmas ribbon layer.
Resize element #15 to 25% and place at top by the stars.
Resize element #60 to 35% and place just above the lantern layer on the left, mirror and duplicate.
Add any other elements that you would like.

Once happy with it all close off your background if using one, then merge visible and resize.
Now add your copyrights and name and any wordart you would like to add.
Save your tag as a png and you are done.

Hope you enjoyed doing this tut.

Waiting for Santa FTU

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Ismael Rac.

You need a license to use this art work. Please do not use without a license.

You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.

 WSL_Mask 78  HERE

 Scrap by Eileens Design Waiting for Santa HERE

Font Santa's Sleigh

Drop Shadow usually V2 H2 50 5

Let's get started

*Remember to add your Drop Shadow as you go along*
 

Open a new image 800 x 800, can resize later.

Copy and paste paper #1 and apply your mask, delete and merge group. Resize it later to fit your tag.

Copy and paste element #40, resize to 85%, then take your magic wand, click inside, expand by 5, paste paper #2, invert and delete. Paste element #56 and hit the delete key on your keyboard, now select none.
Copy and paste element #79, move to the bottom layer and over to the left side of frame. Copy and paste #70 and place over the tree, erase any edges that stick out to far.
Paste element #39, mirror, move to the bottom layer and over to the right side.

Being on the top layer now, apply your tube, resize if needed, duplicate, Adjust, blur, gaussian blur at 5, change the blend mode to hard light, merge down.

Resize element #16 to 75% and free rotate to the left and place toward the bottom, use your pick tool to rotate a little more to the left. Resize element #15 to 75% and free rotate to the right and place at the bottom also.
Resize element #29 to 45%, free rotate to the right and place at the bottom.
Resize element #51 to 40% and place on the left side, take your magic wand click in the frame area, expand by 3, paste paper of choice, invert and delete.
Copy and paste element #46 and place the bright light on the paper of the lantern and the rings of light over your tube.
Resize element #54 to 40% and place behind the lantern and over to the left a bit, duplicate and move to the right, about in the middle. Resize element #73 to 75% and place on the left side behind the lantern. 
Resize element #82 to 35% and place on the right side.
Resize element #53 and #71 to 50% and place on the right side however you like the looks of them. Duplicate #71 and resize again to 75% and place. Resize element #64 to 35% and place where you like.
Resize element #3 to 35% and place on the right side.
Resize element #1 to 30% and place on the right side, move to the bottom layer.
Resize the bunny rabbit to 40% and place on the left.
Add any other elements that you would like.
Once happy with it all, close off any background you used, then merge visible and resize.

On the wording I added noise at 50% and gave it a slight bevel effect. Then I did select, float, defloat, expand by 2, new raster layer and filled with a color from the tube, move below the wording.

Once resized, sharpen once and add all your copyrights and name and you are done.
Hope you enjoyed doing this tut.


 

Alluring FTU

 

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Jose Cano.

 You need a license to use this art work.

Please do not use without a license. You can find this art at SATC HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap Swag Alley Blues
By Magik HERE
Vm Extravaganza-Transmission
EyeCandy Impact-Chrome
xero filter-Soft Mood
Monti Blinds Mask HERE
Font of choice, I used Simply Glamorous  

Drop Shadow usually V2 H2 50 5

*Remember to add your drop shadow as you go along*

Open a new image, size of choice, I do 800 x 800

Copy and paste paper #1, apply your mask, delete and merge group.
Cope and paste the glitter splatter.
Copy and paste the mirror ball.
Go to your preset, select the Ellipse, background null, forground any color, width at 30, draw a circle around the mirror ball.

(If you do not have the EyeCandy Impact, then use a color that matches your tag and give it a bevel effect or use EyeCandy4000-Chrome and play around with the settings)

Apply EyeCandy Impact-Chrome, settings set on Indoor Chrome, Basic set on Office Space and apply with these settings
54.45, 64, 22.33, 0
inside selection marked.
Then go to Adjust, Hue and Saturation, colorize with these settings
Hue 134,  Saturation 150
or select a color from your tube if using a different one.
Take your magic wand and click inside your frame circle, expand by 3, paste your closeup, invert and delete.
Depending on your tube, you may want to mirror yours, I did mine.
Change the blend mode to Luminance (L) and apply the
xero filter-Soft Mood, lower the opacity to 70, then merge down with the mirror ball.
Apply Vm Extravaganza-Transmission with these settings
44, 0, 20 then sharpen once.
Paste your tube and resize if needed and place on the right side.
With the size at 150, type out the word Alluring using Impact, it comes with psp, use any color you prefer.
 Then select all, float, defloat, expand by 3, new raster layer, fill with white, select none and move below. Add noise to the white at 100%.
Place the sparkles behind the wordart.
Then type out Attractive and fasinating, using Satisfaction or one of your choice and then do the same again with the white, except expand by 2 this time and move below.
Resize the cat to 40% and mirror, place behind the wordart on the right side.
Resize the briefcase to 35% and place on the left side behind the wordart. Resize the heart to 25% place behind the wordart on the left and rotate to the left 20%.
Resize the cuff chain to 35%, place on the wordart where you like and then erase some of the chain to make it look like it is hanging over it, duplicate and move over and down some on the other side.
Resize the lips to 35% and place on the left side. Resize again and place by the wordart.
Resize the roses to 40%, free rotate to the left at 90 and place at the bottom of the wordart, duplicate and mirror.
Duplicate a couple of times and rotate back 90 to the right and place behind the briefcase.

Resize flower #1 to 30%, apply Mura Meisters, Copies-Encircle at default setting, then go to Image, resize to 110, move this layer down to below your mirror ball.
Once happy with everything merge visible and resize.
Now add your copyrights and name and you are done.
Hope you enjoyed doing this tut.


 

Autumn Cowgirl

 This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of PinUp Toons.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap Autumn Harvest

by A Cowgirl's Creations  HERE

Mura Meister-Copies
WSL_Mask275

Font St Charles 

Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image, size of choice
I usually make mine 800 x 800 and resize later.

Copy and paste paper #4 and apply your mask, delete and merge visible.
Paste the wall and resize to 85%, change the blend mode to hard light, duplicate 3 more times and move each one down below the other until the paper is covered, merge visible.
Copy and paste the scarecrow and resize and place to the left and lower the opacity to about 70.
Copy and paste the chain link fence, and then the fence.
Resize the grass to 60%, duplicate and place on the fence on both sides.
Copy and paste the mailbox and place on the right side.
Resize the trike to 60% and position in front of the mailbox.
Resize the country crate to to 45% and place on the left side.
Resize the bucket to 35% and place by the crate.
Duplicate the mailbox, resize to 50%, erase the mailbox part and the base, we just want the branches, place one behind the crate on the left, duplicate and mirror and place behind the trike on the right.
Resize the weed to 50%, duplicate and place how you like the looks of them.
Duplicate a couple more time, erase some parts and just move them in different areas.
Resize leaf #2 to 20% apply Mura Meister-Copies, line rotate
with the first number on 12, all else at default.
Go to Effects, Distortion, wave with these settings
0, 100
2, 50
Transparent
place at the bottom of your tag, above the mailbox layer, duplicate and mirror and adjust to your liking.
Erase any of the ends that have a square edge on them.
Paste the bubbles layer.
Resize acorn #2 to 10% and being on the top layer, duplicate several times and place where you like.
Resize the butterfly to 10%, duplicate as many times as you like and rotate one a little and then place them all where you like the looks of them.
Copy and paste your tube, resize if needed and place where you like the looks of yours.
Once happy with it all close off your background if using one, then merge visible and resize.
Now add your copyrights and name and any wordart you would like to add.
Save your tag as a png and you are done.

Hope you enjoyed doing this tut.


 

Be Thankful Forum Set

 

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of PinUp Toons.

You need a license to use this art work. Please do not use without a license.

You can find this art at CDO HERE

 

Supplies Needed

 

I used PSPX...but any of them should work.

Scrap Pumpkin Patches Blog Train

 by Nette's NightOwl HERE

Xero Filter-Porcelain and Clarity

Font Coneria Script 
Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 600 x 250

 

Copy and paste paper #1 and then crop.

Resize the tree to 40% and place on one side, duplicate and mirror.

Resize the barn to 35% and paste in the center.

Resize the fall group wheel to 25% and place on the right side of the barn.

Resize the scarecrow pumpkin fence to 20% and place on the left side, duplicate and mirror and erase the scarecrow off this one. Move this one below the wheel layer.

Resize the watering can with leaves to 8% and place on the left side of barn.

Paste the leaf border and flip and move to the bottom and adjust how you like the looks of them.

Copy and paste your tube and resize if needed and move below the leaf layer.

I resized the branch layer to 25% and moved below the fence layer and duplicated a couple of times and place to where I liked the looks of them.

Once happy with it all merge visible and add the xero filter- Porcelain first and then Clarity (optional).

For the frame, select all, new raster layer, fill with a color from your tube, contract by 2 and delete, merge visible.

Add your copyrights and any wording and name and you are done.

I added a bevel to the wordart and noise at 25%

Bevel settings I used were

Bevel2, width 2

15, 3, 5, 0

273, 34, 42

 

For the Avator

Copy and paste your finish tag into a new image 150 x 150 and resize to 75%

 and position where you like, sharpen and merge visible.

For the frame, select all, new layer, fill with color of choice,

modify, contract by 2, delete and merge visible.

 

Hope you enjoyed doing this tut.