New Blog!

I am moving to a new Blog!

I hope you all will Follow me over there

CLICK: HERE

CT PTU Feminine Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called Femininity

You need a license to use this art work. Please do not use without a license.

 You can find this art at Scrap N Company  HERE
and also the scrap kit HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Femininity Lil Mz's Brainstorm  HERE

DD Geo Mask_4  HERE

Check out the rest of the blog HERE

Filter
Mura Meister Copies-Encircle
Xero-Clarity and Soft Vignette

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 15, apply your mask, delete, merge group.

Paste element 98, then element 23 on top of that, resize both to 95%, click inside
the lower frame with your magic wand,
expand by 5, paste paper 8, invert, delete, then
paste your close up, delete, select none.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend mode to
hard light, then apply the Xero filter-Clarity, then Soft Vignette with these settings,
Elliptical, Foreground color, have your foreground color on black,
Diagonal dots
1, 1, 1, 0, 255
merge down.

Resize element 53 to 40%, apply Mura Meister Copies-Encircle, change the first
number to 16, paste on the mask layer.

Resize your tube to 45%, paste on the left side of the frame.

Resize element 37 to 35%, paste on the frame below the tube on the left, duplicate,
mirror.
Resize element 41 to 60%, paste on the right below the flowers, duplicate, mirror.
Resize element 102 to 40%, paste in front of the tube by the legs.
Resize element 57 to 55%, paste on the left below the tube.
Resize element 54 to 40%, paste in front of the tube on the left of the dog.
Resize element 99 to 50%, paste in front of the coffee cup, below the dog layer.

Resize element 39 to 40%, paste below the tube layer on the right.
Resize element 46 to 50%, paste on the right under the flower.
Resize element 47 to 30%, paste above the chain you just placed.
Resize element 2 to 40%, paste below the lipstick and up just a bit on the right.
Resize element 50 to 65%, paste below the perfume on the right.
Resize element 76 to 55%, paste on the right below the tube layer.
Resize element 43 to 40%, paste below the lipstick layer on the right.

Being on the layer just below the dog, paste element 34, move to the left,
erase any part you don't want on either tube, duplicate, mirror, erase the parts on
the face and any overlapping.

Resize element 89 to 40%, paste on the left below the flowers, duplicate, move up some,
duplicate twice more, mirror both and adjust on the right below the flowers.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Beer Celebration

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called Celebrations of Beer

You need a license to use this art work. Please do not use without a license.

 You can find this art at Scraps N Company  HERE
and also the scrap kit HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Celebrations of Beer Lil Mz's Brainstorm  HERE

RD Mask Set 147_2  HERE

Check out the rest of the blog HERE

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 5, apply your mask, delete, merge group.

Past element 22, click inside with your magic wand, expand by 5, paste paper 9,
invert, delete, paste your close up, delete, select none.

Resize element 56 to 70%, paste off center to the left.

Resize your tube to 45%, paste behind the table to the right being on
the frame layer.

Resize element 29 to 25%, place on the table.
Resize element 27 to 40%, mirror, paste on the table on the right, duplicate,
mirror, place on the left at the bottom and once coins are pasted, move
on top of them.

Resize element 4 to 25%, paste  by the tube legs.
Resize element 28 to 35%, paste at the bottom on the left above the table leg,
duplicate, move over by the hat.

Paste element 37 above the mask layer at the top, duplicate, move down to the bottom more.

Paste element 8 on the frame layer, free rotate to the left at 90 degrees.
Resize element 7 to 25%, paste at the bottom by the hat.

Resize element 19 to 45%, paste on the table below the leprechaun.
Resize element 23 to 45%, paste on the table below the other beers.
Resize element 10 to 25%, free rotate to the left at 20 degrees.
Paste element 93 on the mask layer and up a bit, click inside with your magic wand,
expand by 5, paste paper 5, invert, delete.
Resize element 50 to 25%, paste at the bottom below the coins, move up a bit while applying
the filter, Mura Meister Copies-Glob, change the first number to 20, move below
the paper frame on the left, duplicate, mirror.
Resize element 14 to 35%, paste at the bottom by the horseshoe.
Resize element 11 to 70%, paste about center on the right below all the paper layers of frames,
duplicate, mirror, move down to the lower left.
Resize element 100 to 60%, paste one behind the tube layer on the right, duplicate,
mirror, move above the string on the left.
Resize element 30 to 25%, place on the lower left.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Spring Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.
Tube is called Spring

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Celtic Spring by Irish Princess Designs  HERE
This kit is BEAUTIFUL, the colors are awesome, you will love tagging with
this kit for your Spring and St Patrick tags.

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, ready for all your Spring and St Patrick tagging fun.

RD Mask Set 147_1  HERE

Check out the rest of the blog HERE

Font of Choice, I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 11, apply your mask, delete, merge group.

Resize element 72 to 75%, free rotate to the left at 10 degree, click inside with your magic wand, expand by 5, resize  your tube to 75%, paste below the frame, invert, delete,
select none.

Resize your tube to 32%,  mirror, paste on the right side of the frame.

Resize element 97 to 55%, mirror, paste on the left above the frame.
Resize element 81 to 50%, paste on the left on the flower layer.
Resize element 78 to 75%, paste on the right below the tube layer.
Resize element 25 to 65%, paste above the tube layer at the bottom to cover
the straight edge.
Resize element 80 to 45%, paste on the right being on the top layer.

Resize element 14 to 35%, paste on the right below the harp.

Resize element 89 to 25%, paste on the left below the flower layers.
Resize element 39 to 75%, mirror, paste just above the mask layer at the lower left.

Resize element 34 to 50%, paste on the left below the flowers.

Resize element 29 to 35%, paste on the left above the branch you just pasted, duplicate, mirror, free rotate to the right at 90 degrees, move above the harp layer..

Resize element 96 to 15%, duplicate, place them by the basket at the bottom.
Resize element 91 to 20%, paste at the bottom under the flower layer.
Resize element 56 to 50%, mirror, free rotate to the left at 50 degrees, paste at the upper left, duplicate, mirror.

Resize element 95 to 25%, mirror, paste at the lower left, being on the top layer,
duplicate, resize to 75%, move to the top where you like.
Paste element 50 just above the mask layer on the upper right.
Paste element 22 on the top layer, erase the part on the face in the frame.
Resize element 81 to 60%, paste the small part on the harp and erase the rest.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT PTU Irish Lassie 3 Piece Set

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Alicia Mujica
Tube is called St Patrick's Special Pack 2017 tube 1

You need a license to use this art work. Please do not use without a license.

 You can find this art at her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Royally Irish by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, ready for all your St Patrick tagging fun.

DD SPD Mask 3  HERE

Check out the rest of the blog HERE

Font of Choice, I used Crispy

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 29, apply your mask, delete, merge group,
and I mirrored my mask.

Resize element 22 to 90%, click inside with the magic wand, expand by 5, paste paper 27,
invert, delete, select none.

Resize your tube to 35%, paste on the left side of the frame.

Paste element 52, mirror, paste on the left behind your tube.

Mirror element Ail 3, paste on the frame layer and move to the right just a bit.
Paste element 3 on the right at the bottom, resize to 40%.

Resize IAH element 96 to 40%, paste on the left above the tube layer by the foot.

Paste Lucky Collab CUE18  at the bottom below the tube layer, duplicate, mirror.
Paste element IAH 77 above the gold fleck layers you just pasted.

Resize CUD Designer Mix 409 to 40%, paste on the left below the shoe, duplicate, mirror,
move below the horseshoe layer.

Resize AIL element 24 to 25%, paste at the bottom on the right of the tube.
Paste element 16 below the tube layer and adjust how you like.
Resize element 27 to 50%, paste on the right below the vine, mushroom layer and down some,
duplicate, move up just a bit,
duplicate again, mirror, move down some behind the violin.

If you are going to do the Signature and Avator, don't merge your tag just yet.

Signature
Oen a new image, 600x250, paste paper 27.
Paste the mushroom vine frame on the right more.
Paste your tube on the left.
Paste the violin, mirror, resize to 70% and move to the left below the tube.
Paste the gold fleck layer at the bottom, duplicate, move over.
Paste the clover and coin layer at the bottom, above the fleck layer.
Resize the horseshoe to 60%, paste on the right.
Paste the white flower on one side, duplicate, mirror, adjust to your liking.
Add any other elements if you like, then merge visible, add your frame.
I used AAA Frames-Foto Frame with the width set at 3 and everything else at default.
Add your copyright and name.

Avator
A size that is allowed for your group or forum
Mine is 200x200
I took the tag from the Signature, resized it to 90%, pasted so the mushroom
part was showing, if you prefer the tube part showing, that is up to you.
Make it your own.
Once happy, merge visible, add your frame with the same settings as before.
Add your copyright and name.

Now back to your tag, add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Cluster Tag Show Offs Crimson Clockwork

Showing off some tags I made using PTU Clusters made by Lady Dragus

Using the beautiful, awesome kit Crimson Clockwork by Irish Princess Designs

You will want to purchase these Clusters for your Steampunk  tagging fun.

Go check them out and check out all the other awesome PTU Clusters while you are there.
Artist I used was VeryMany

You can purchase these CLUSTERS-HERE and HERE

and KIT at one of these stores

Irish Princess Designs  HERE

  HERE, HERE, HERE

CT PTU Steampunk Lady

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  VeryMany.
Tube is called Steampunk Lady

You need a license to use this art work. Please do not use without a license.

 You can find this art at the store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Crimson Clockwork by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, ready for all your Steampunk tagging fun.

RD Mask Set 146_1  HERE

Check out the rest of the blog HERE

Filters
Xero filter-Greyscaler
Unplugged Tools-Interlace

Font of Choice, I used Steampunk MVE

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 11, apply your mask, delete, merge group.

Paste element 93, resize to 90%, click inside with the magic wand, expand by 5,
paste your close up tube, invert, delete.
Duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to Screen,
then apply the Xero filter Greyscaler, merge down.
Then apply Unplugged Tools-Interlace with these numbers
17, 50, 1, 0

Resize your tube to 50%, paste on the right above the frame.

Paste element 83, mirror and move to the left.
Resize element 23 to 50%, paste on the right above the tube, duplicate, mirror, move
up a bit on the left., duplicate twice, more, move to just above the mask and up a bit.

Resize element 9 to 25%, paste below the red bush on the left, duplicate, move up some, duplicate again, mirror, move below the other red bush about center,
duplicate, move up on the right behind the tube layers.

Resize element 3 to 50%, paste below the tube.
Resize element 2 to 75%, paste on the right below the red bush.
Resize element 5 to 75%, mirror, paste above the clock layer on the right.

Resize element 16 to 35%, paste on the left in front of the bicycle.
Resize element 81 to 40%, paste by the chest.
Resize element 68 to 25%, paste by the camera.
Resize element 71 to 25%, paste by the camera.

Resize element 25, paste under the bicycle layer at the bottom.
Paste element 34 just above the mask layer on the upper left.

Resize element 88 to 60%, add a fat gradient glow and paste at the lower right.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

CT PTU Patrickcia Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.
Tube is called Patrickcia

You need a license to use this art work. Please do not use without a license.

 You can find this art at Scrap N Company  HERE
and also the scrap kit HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Patrickcia Lil Mz's Brainstorm  HERE

DD SPD Mask_3  HERE

Check out the rest of the blog HERE

Filters
Mura Meister Copies-Glob

Font of Choice, I used Spring Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 6, apply your mask, delete, merge group.

Paste element 38, flip, click inside with your magic wand, expand by 5, paste paper 6, invert, delete, keep selected, paste your tube on one side, mirror the tube and then paste in the other frame, delete, both, select none.

Paste element 40 below the frame paper, place how you like, erase any part you
don't want showing.

Resize your tube to 50%, paste in the center.

Resize element 74 to 70%, paste on the right below the tube.
Resize element 8 to 25%, paste on the chair.
Resize element 23 to 25%, paste by the chair leg.

Resize element 68 to 50%, paste about center to apply the Mura Meister Copies filter-Glob then move down and below the paper layer of the frame, you may want a different look
with the rocks, so play around with the numbers, I used the first number 27 on mine,
duplicate, mirror, duplicate again and use this one to fill in and erase parts you
don't want.
Resize element 58 to 40%, paste on the left on the rocks, duplicate, mirror, place behind
the chair where you like, duplicate again, move more to the center behind the tube.

Resize element 66 to 65%, paste on the rocks, above the chair on the right, duplicate,
mirror, move over and up on the lower frame a bit.

Resize element 69 to 30%, paste below the tube layer on the left.
Resize element 71 to 25%, paste by the feet of your tube and below.
Paste element 2 below the tube layer at the top on the ribbons of the frame.
Resize element 85 to 50%, paste at the upper right below the gold element, duplicate,
mirror, adjust on the left upper side.
Resize element 31 to 25%, paste on the hat at the bottom.
Resize element 62 to 30%, place on the left above the flower layer.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Getting Ready

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Keith Garvey.
Tube is called Nails 
You need a license to use this art work. Please do not use without a license.

 You can find this art at his store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit BAK International Woman MK2 by BitsNBobs  HERE or HERE
This is a mini kit, beautiful color

WSL Mask 84  HERE

Filter
Unplugged Tools-Interlace

Font of Choice, I used Heart Romance, I had to set the size to 250

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

This is a quickie

Open a new layer 800x800, resize paper 1 to 23%, apply your mask, delete, merge group.

Resize element 10 to 25%, paste, duplicate, free rotate to the right at 45 degrees,
move below the top frame, erase the parts showing on the square part of the top frame.
Click inside the square frame on top, expand by 2, new raster layer, fill with #feb4ac,
paste your close up tube, invert, delete, select none.
Drop shadow I used on the frames #cf4638.

Duplicate your tube, go to Adjust, Blur, Guassian blur at 4, apply the Unplugged Tools filter-Interlace to both papers and the tube with these settings
13, 19, 1, 0

Duplicate the paper in the frame, free rotate at 45 degrees, move down below the bottom frame layer.
Take your free hand tool draw around the outer square of the frames, new layer, fill with the same color, move below both frames.

Resize element 7 to 23%, paste on the left on the top frame.
Paste your full tube on the right on the frame layer, resize to 90%.
Resize element 6 to 6%, paste by your tube.
Resize element 5 to 5%, paste by the tube where you like.
Resize element 4 to 5%, place by the other makeup.
Resize element 3 to 10%, mirror, paste by the dress on the left below the makeup.

Resize element 8 to 10%, duplicate, paste one by the dress and the other one below the
tube layer on the right, duplicate that one and move down a bit.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Good Luck To You

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Stan Dubin.
Tube is called Adriana

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Royally Irish by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is AWESOME, ready for all your St Patrick tagging fun.

DD SPD Mask 2  HERE

Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 25, apply your mask, delete, merge group.

Paste element 20, resize to 95%,  then  resize element 38 and paste on top of that, click inside
with your magic wand, expand by 5, paste paper 26, invert, delete, move below the frames.

Resize your tube to 40%, paste on the top frame.

Resize element 96 to 40%, paste on the left by the hand of the tube.
Paste element 16 below the tube layer at the bottom.
Paste element 25 between the 2 frame layers.

Resize element 24 to 30%, paste below the shoe on the left, duplicate twice more, move
one to the left under the hand and the other to the right under the shoes of the tube.

Paste the Lucky Collab CU element 18 at the bottom, below the tube, duplicate, mirror.
Paste element 05 on the right on the frame layer.

Resize the horseshoe to 35%, paste on the leg of your tube, erasing some to look like
it is going under one leg.
Resize flowers to 50%, paste on the left on the frame layer, duplicate, mirror,
move above the armor knight.
Resize element 27 to 45%, paste below the knight on the right, duplicate, mirror.
Resize element 16 to 50%, paste on the top layer on the left more.
Paste the harp above the knight layer on the left.
Resize the tiara to 30%, paste at the bottom where you like.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

PTU I Meant to Behave

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Mike Denning.
Tube is called Smoke

You need a license to use this art work. Please do not use without a license.

 You can find this art at  Mystical Scraps store,  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Urban Jungle by Irish Princess Designs  HERE

AngieTaggedMe Mask 16  HERE

Check out the rest of the blog HERE
Template 54 by DD  HERE
Check out the rest of the blog HERE

Filters
Xero-Soft Mood, Porcelain and Clarity
Screen Works-Light Gauze
Mura Meister Copies-Encircle

Font of Choice, I used Rockers

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original, and delete the credits.
Go to Image, resize, resize all checked and resize to 85%, first, then go to Image, Canvas size, 800 x 800.
Paste paper 6, apply your mask, delete, merge group, resize to 90%, move to the bottom layer.

Select the red bottom layer, paste paper 4, invert, delete, delete the template layer also.
Red top rectangle, paste paper 2, invert, delete.
Purple bottom rectangle, resize paper 10 to 75% and paste.
Do the same with purple top rectangle.

White circle add, noise at 100%.

Resize your tube to 55%, paste below all the wordart layers in the center.
Apply the Xero filter-Porcelain first then Clarity.
Pasting the tube now will help place the tubes going in the circles next.

Purple circle paste paper 6, invert, delete, keep selected, mirror your tube first, then paste off to
the right side, delete, select none, duplicate, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to Screen, then apply the Xero filter-Soft Mood, then Screen Works-Light Gauze,
merge down. Select this tube, float, defloat, paste element 24 on the tube,
adjust to your liking, then invert, delete, merge down.

Duplicate this tube, mirror and place on the large yellow circle, select the circle, float,
defloat, adjust your tube, invert, delete, select none.

Yellow circle grouping, resize paper 3, paste move over a bit, invert, delete.

Paste element 60 at the bottom below the tube.
Resize element 14 to 50%, place on the left below the tube layer.
Resize element 73 to 50%, paste on the left by the bottle, duplicate, mirror, move
back to the left and below the bottle.
Resize element 47 to 25%, paste by the bottle.
Resize element 29 to 25%, free rotate to the left at 25 degrees, paste between the bottle
and glass.
Resize element 59 to 45%, paste on the right below the wordart.
Resize element 90 to 40%, paste below the lipstick.
Resize element 13 to 25%, paste on the right below the compact.

Paste element 25 below the white circle with the noise, on the upper right, duplicate, merge down, duplicate, mirror, adjust both.
Resize element 28 to 45%, paste on the right below the perfume bottle.
Resize element 43 to 50%, apply Mura Meister Copies-Encircle, move down to
just above the mask layer.
Paste element 74 below this circle you just made, duplicate, mirror.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Spring Time

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of  Kajenna.
Tube is called Digby

You need a license to use this art work. Please do not use without a license.

 You can find this art at the PFD store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap kit Watercolor Garden by Irish Princess Designs  HERE

You can also find this kit at one of these stores here, here, here
This kit is beautiful, lots of different ways to tag with this one, Spring, Easter and more.

Mask19 by Angie Tagged Me  HERE

Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle

Font I used Good Dog

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image 800x800, paste paper 5, apply your mask, delete, merge group.

Paste element 61, resize to 80%, click inside with your magic wand, expand by 2, paste
paper 5, invert, delete.

Resize element 56 to 85%, paste, duplicate, being on the bottom one, move over a bit and down, erasing the fence  except for the last post, duplicate, mirror.

Resize element 10 to 40%, paste on one side below the top fence, duplicate, mirror, duplicate
again, move below the tube layer on the right.

Resize your tube to 28%, paste above the fence layers on the grass.
Resize element 30 to 40%, paste below the tube by the tail, free rotate to the left
at 15 degrees.
Resize element 27 to 25%, paste on the left below the tube layer.
Resize element 39 to 40%, paste on the right below the flower layer behind the tube.

Resize element 62 to 25%, paste on the right in front of the wooden stool.
Resize element 14 to 55%, mirror, paste on the right below the stool layer.
Resize element 66 to 65%, free rotate to the right at 30 degrees, paste on the frame on the right,
duplicate, mirror.
Resize element 67 to 20%, paste below the lantern on the right.
Resize element 59 to 70%, paste on the left just above the frame layer.
Resize element 40 to 15%, paste on the bench, then back to the original bird, resize to 10%,
paste on the spring sign.
Resize element 28 to 15%, paste below the pots on the left, duplicate, move more to the left and down some.
Resize element 49 to 30%, mirror, paste on the left below the rocks.

Resize element 29 to 45%, mirror, move more to the center of your tag, then apply Mura Meister Copies-Encircle changing the first number to 25, then move to just above the mask layer.

Add any other elements you would like.

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.

Vintage Beauty

This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Lysisange.

Tube is called  Ombeline

You need a license to use this art work. Please do not use without a license.

 You can find this art,  it is Exclusive to her store  HERE

Supplies Needed

I used PSPX...but any of them should work.

PTU Scrap Vintage Romance by Lil Mz's Brainstorm  HERE

RD Mask set 147_2  HERE

Check out the rest of the blog HERE

Filters

Xero-Soft Mood

Mura Meister Copies-Encircle

Font of Choice, I used Echinos Park Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.

Let's get started

*Remember to add your drop shadow as you go along*

 

Open a new image 800x800, paste paper 14, apply your mask, delete, merge group.

 

Resize element 115 to 55%, apply Mura Meister Copies-Encircle, change the

first number to 16.

 

Paste element 17, free rotate to the left at 10 degrees, duplicate, mirror, move down

a bit on the right, merge down.

Click inside the frames, expand by 5, paste paper 12, adjust so just the color shows and not the trim on the left of the paper, mirror your close up, paste in the left frame, delete, select none, duplicate the close up, mirror and place in the lower right frame, medge down.

Duplicate the tube, go to Adjust, Blur, Gaussian blur, number on 4, change the blend

mode to Screen, then apply the Xero filter-Soft Mood, merge down.

 

Resize your tube to 33%, paste in the center.

 

Resize element 115 to 55%, paste on the frame layer on the left at the bottom, duplicate,

mirror.

Resize element 102 to 45%, paste on the left below the tube layer.

Resize element 81 to 35%, paste on the right of the tube at the bottom.

Resize element 46 to 30%, paste on the left by the boxes.

Resize element 50 to 30%, paste by the purse on the left.

Resize element 19 to 40%, paste under the book on the right, duplicate, mirror, move

below the tube by her shoes.

Paste element 74 on the frame layer at the bottom, duplicate, free rotate to the right at 90 degrees, place on one side, duplicate, mirror.

Resize element 71 to 50%, free rotate to the right at 90, paste on the left, duplicate, mirror,

move both up a bit.

Resize element 43 to 50%, paste below the flower layers on the right, duplicate, mirror,

move up just a bit.

Resize element 77 to 35%, paste at the upper left and erase some of the stem, duplicate, mirror.

Paste element 26 on the circle flowers at the upper right, duplicate, mirror, move to the bottom left.

Paste element 39 on the right below the tube layer, duplicate, mirror, move below the boxes layer.

Resize element 25 to 30%, paste on the right below the book.

Resize element 14 to 30%, free rotate to the left, duplicate 3 or 4 times, place at the bottom under several layers for the look you want.

 

Add any other elements you would like.

 

Crop your tag to be sure no stray shadows are on the edges of your tag.

Once happy with it all, close off any backgrounds, merge visible.

Resize first, then add your copyrights and name.

That's it

Hope you enjoyed doing my tut.