Friday, September 14, 2012

BOO! PTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Grafik.
You need a license to use this art work. Please do not use
without a license.
You can find his art at PFD HERE
 
Supplies needed
Scrap Happy Halloween by
Sarah at Wicked Little Cupcake Designs HERE
WSL_Mask 208 HERE
Font used Ghoulish Fright
Drop shadow usually V2 H2 50 5 black

*Remember to apply your drop shadow as you go along*

Open a 650 x 650 new image, fill with white so you can see what you are working on.
Paste paper #2, resize to 85% and apply your mask.
Copy and paste the star wire.
Copy and paste frame 2, resize to 85%, click inside with your magic wand and paste paper #3, invert and delete and move below the frame.
Resize the haunted house to 55% and place below the frame and erase and edges showing past the frame.
Resize the fence to 50% and place behind the house and move over and erase any excess outside the frame.
Duplicate and mirror to the other side.
Resize the black cat to 25% and place on the fence on the left side.
Resize ribbon #1 and place at the bottom of the frame.
Copy and paste your tube and resize and mirror and place on the right side above the ribbon layer.
Resize the moon to 40%, place at the top right, under the frame layer and change the blend mode to Luminance (L), erase any outside the frame area.
Lower the opacity to around 75.
Resize the bat to 15% and place by the moon, then take your pick tool and rotate it just a bit to the left.
Resize the wordart BOO! to 50% and place at the top of your tag.
I use the cupcake in honor of Sarah being the Wicked Cupcake, lol, you might want to use the pumpkin or the witches hat for this part.
Resize to your liking and place on the left side.
Close off the white background and merge visible and resize your tag now.
Add your copyright and name and that's it unless you want to do the animation.
Animation
Reopen the white background you closed before.
Resize the ghost to 25% and place just above the paper layer in the frame and move low, just so the eyes are showing above the house, copy merge and paste in animation.
Back to psp and move the ghost up some copy merged to animation and paste after current frame.
Back to animation and move the ghost up again and move over a little bit, take to animation again.
Back to psp and do this a few more times, moving the ghost each time, until you are happy with it all.
Select all in animation and change the frame properties to 25 and test and if happy with the way the ghost is moving around, save and that is it.
Hope you have enjoyed doing this tut.


 

The Lady is a Vamp FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Template 162 by Punky Butts HERE
WSL_Mask 84  HERE
Xero Filter-Soft Mood and Clarity 
EyeCandy4000-Gradient Glow(Optional)

Scrap by Justine called The Lady is a Vamp HERE
Font Morevil
Drop Shadow usually V2 H2 50 5
Let's get started
Open the template, duplicate and close the original, delete the credits.
Then I go to canvas size and make it 800 x 800.
 
Paste paper #5 and apply your mask, delete and move to the bottom of the template.
Copy and paste Fence01, add your drop shadow as you go along.
To save alot of extra typing, I added a medium gradient glow to each of the layers.
Select either the right or left circle, select all, float, defloat, paste your tube into place, then invert and delete, select none, change the blend mode to Luminance(L).
Duplicate and mirror and place on the other circle.
On each layer of the template you will be doing the select, float, defloat, invert and delete, so I will not type that each time. And delete that layer of the template also.
Circle dots I left them the red color they are, you may want them a different color.
On ALL the light grey squares, you will paste paper #2, invert and delete on each one of them.
On ALL the dark grey squares, you will paste Vamp Glitter03, invert and delete on each one of them also.
Top and bottom black rectangle, paste paper #2.

Large circle, select all, float, defloat, paste flair01 into selections, then paste paper #8, invert delete, select none, move below the flair01, change the blend mode to Luminance (L). Apply the xero filter, soft mood first, then apply clarity.

Left and right small rectangle, fill with a paper of choice, I used the red one.
Left large red and right large red rectangle paste Vamp Glitter01.
Square black left and right, select all, float, defloat, paste into selections flair01, then paste paper #8, invert and delete, move the paper below the flair, change the blend mode to hard light.
Apply the xero filter, soft mood first, then apply clarity.
On the wordart I took one at a time, the red ones and selected all, float, defloat, new raster layer and filled with #9c2229, then I would merge each one down on the white layer back ground so I could move each one around on their own.
 You can decide if you want to leave them the color they are or change them. Move them where you like the looks.
Add your tube and resize if needed and place on the right side.
Copy and paste the barb wire and place where you like, I moved it under the black squares.
Resize the candlestick to 75% and being on the top layer place it on the right side of your tube.
Resize the cat to 75%, mirror and place by your tube, add a medium black gradient to it.
Resize the crow to 65%, mirror and place on the left side of the tag, duplicate and move up higher where you like it. Be sure to sharpen.
Resize Lipso2 to 35% and free rotate to the right, 15 and place on the bottom left side of tag.
Resize the bat to 50% place at top, sharpen a couple of times, then duplicate twice and place one on the left and one on the right sides.
Resize the sparkle to 90% and place on your tag.

Happy with everything, then merge visible and resize.
Add your copyright and name and you are done.
Hope you enjoyed doing this tut.

Wednesday, September 12, 2012

Autumn Wishes PTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Jennifer Janesko.
This was a Sept Bonus tube
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO HERE
Supplies Needed
I used PSPX...but any of them should work.
Mura Meister Filter-Copies
PhotoEffex-Scanlines
Scrap Seasons Change by
Sarah at Wicked Little Cupcake Designs HERE
WSL_Mask 36 HERE
Font KG Fall for you
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*
Open an image to a size you like, I usually do mine 800 x 800 and resize it later.
Copy and paste paper #3 and apply your mask, delete and merge group.
Paste frame 4, click inside with your magic wand, expand by 5 and paste paper #6,  invert and delete, move below the frame.
Resize leaf 2 to 25%, duplicate mirror and flip, will adjust after you add your flower layer.
Erase the stem and the top 2 flower parts, resize to 45%, paste on top of the leaves, now adjust to your liking, merge these 3 layers together.
Apply Mura Meister Copies-Encircle, change the top number to 18, all else at default setting, place on top of your frame. Click inside with your magic wand, expand by 7 and paste paper #8, invert delete, move below your flower frame.
Apply PhotoEffex filter-Scanlines  with these settings
2, 2, 20, 10
100, 0
Resize the wooden ladder to 65%, paste, mirror and free rotate to the left at 35, place on the right side of your frame
Copy and paste the Leaf Vine, place on one side, duplicate and mirror and place on the other side.
Resize the wheel barrel to 65% and place on the right side.
Resize bow #3 to 25% and place on one side, duplicate and place on the other side, where you would like them.
To do the wording Autumn Wishes on a curve, click on your preset tool,  and select the Ellipse circle, close off your background color and select width about 2 or 3, draw a circle around your frame, not touching the frame. Add a new raster layer and click your text tool, hold it over the circle until you see a curve under your A, then type out what you would like yours to say.
You will need to move it around until it is where you want it, then convert to a raster layer, and delete the circle layer.
Add your name to your tag now.
If using a white background, delete that now and merge visible.
Resize your tag first and then add all your copyrights.
Hope you enjoyed doing this tut.





Thanksgiving Blessing PTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  PinUp Toons.
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Seasons Change by
Sarah at Wicked Little Cupcake Designs HERE
WSL_Mask 84 HERE
Xero Filter-Porcelain and Clarity
Font Jayne Print YOFF
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*
 
Open a image to a size you like, I usually do mine 800 x 800 and resize it later.
Copy and paste paper #2 and apply your mask, delete and merge group, duplicate and mirror and move both out a little bit to each side.
Paste paper #3 and apply the same mask, delete and merge group.
Copy and paste frame #3 and resize to 85%.
Take your magic wand, click inside, expand by 5 and paste paper #4, invert and delete, move below the frame layer.
Copy and paste the stone path, mirror and move below the frame and erase anything sticking outside the frame.
Paste the wood latter, resize to 50%, mirror and free rotate to the left at 45% and place on the right side.
Resize ribbon #1 to 50% and place at the bottom of the frame.
Copy and paste the leaf vine, mirror and place on the latter.
Resize flower 2 to 40% and place behind the leaf vine where you like, duplicate once or twice more and mirror one and move where you like the looks of them.
Resize leaf 1 and resize to 50%, mirror and place on the right.
Resize the cupcake to 25% and place on the right side.
Copy and paste your tube and move below the frame, duplicate and move above the frame and erase any part over the frame.
Add the xero filter-porcelain to both tubes.
Once happy with it all, merge visible and resize your tag.
Add the xero filter-Clarity to your tag, and
add all copyrights and name and thats it.
Hope you enjoyed doing this tut.
 
 
 
 

Tuesday, September 11, 2012

Soon to be Fall FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Alex Prihodko.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD HERE
Supplies Needed
I used PSPX...but any of them should work.
Mura Meister-Copies
Scrap kit Blessful Fall by Jennys Design HERE
Font Satisfaction  
WSL_Mask 84 HERE
Drop Shadow usually V2 H2 50 black

Let's get started
Remember to add your drop shadow as you go along.
Open a new image size of choice, I usually do 800 x 800,
more room to work on.
Open paper #2, go to your patterns and select this paper and fill your image with this and apply your mask, delete and merge group.
Open flower, flower 3 and leaf 2
Resize the 2 flowers to 50%, place the orange one first, then the leaf, mirror the leaf and erase the stem part.
Then paste the flower and position everything into place, then merge visible.
*Apply Mura Meister Filter- Copies, Encircle*
Being on the frame layer, take your magic wand and click anywhere outside of it, the frame should be selected now, paste paper #4 and delete, move below the frame layer.
Resize the grass bow to 50% and place at the top of the frame.
Resize leafs to 15%  and place to one side, duplicate and mirror, merge down and add your drop shadow.
Resize leaves to 10% and duplicate 3 or 4 times and place where you like them. May want to move some under the other leaf.
Resize the bush to 50% and place on one side and duplicate and mirror to the other side.
Resize the mushrooms to 25% and place on one side, duplicate and mirror to the other side.
Resize the water can to 20% and place where you like.
Resize the flower splash to 85% and move to the bottom, duplicate and flip and mirror and position.
Resize the time heart to 10%, free rotate to the right, 35% and place by the mushrooms.
Type any wordart that you would like to use and your name now.
I added EyeCandy4000-Gradient glow medium setting for the wordart and my name.
Merge visible and resize your tag now and add your copyright.
 
 

Monday, September 10, 2012

Sexy Vamp FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac.
You need a license to use this art work. Please do not use without a license.
 
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Template by Samantha at Creative Misfits HERE
Scroll down some
Mask by Tonya-Halloween Bats at CM also HERE

Xero Filter-Porcelain
PhotoEffex-Scanlines
EyeCandy4000-Gradient Glow
Scrap Made by Justine called The Lady is a Vamp HERE
Font Rufa 
Drop Shadow usually V2 H2 50 5
 
Let's get started
Open the template, duplicate and close the original.
Then I go to canvas size and make mine 800 x 800.
Delete the credits and the fangs.
Paste paper #1 and apply your mask, and delete and move to the bottom of the template.
Copy and paste Fence01, add your drop shadow as you go along.
Select rectangle back, select all, float, defloat, paste paste paper #8, invert and delete, also delete that layer of the template.
You will be doing this for each layer of the template.
Rectange frame add noise at 50%.
Click on the Oval back layer, select and paste paper #2. Oval layer add the same noise again.
Click the back layer, select all, float, defloat, add a new raster layer, fill with black, add the PhotoEffex filter-scanlines
at that settings
2, 2, 20, 10
100, 0
Vertical toggle unchecked
Border layer add the same noise again.
Sexy Vampire club wordart add, EyeCandy4000, gradient glow with medium setting and a red color of choice.
Left bottom back, select and resize to 80% and paste vamp glitter #3.
Left bottom square, apply EyeCandy4000 Chrome and color with your Change to target brush with black.
Left top back, select, paste paper #1, invert and delete.
Do not deselect yet, now paste your tube of choice and delete and select none. Apply xero filter-soft mood to your tube.
Left top square, apply  EyeCandy4000 Chrome and
go to Adjust, Hue and Saturation, colorize and change both numbers to 255.
Circle back, select, float, defloat, new raster layer and fill with
#840000 or color of choice. Apply PhotoEffex-scanlines with same settings as before but check the Vertical Toggle.
Resize Vamp Lips01 and resize to 60% and place in the circle you just filled.
Add a drop shadow to the wordart.
Copy and paste your full tube and place where you like, I move mind to where the one leg was behind the circle.
Resize boot01 to 50% and duplicate, color the same as before, Hue and Saturation, colorize, both numbers on 255.
Resize the bat01 to 50% duplicate and place.
Copy and paste the screw, place on the black rectangle, duplicate and mirror.
Resize the batty cupcake to 40% and place by the boots.
Resize the blood drop to 25% and place on the lips in the circle.
Add the sparkles, resize if needed and place on the top layer of your tag.
Paste the barb wire and move it down until you have it under the top back layer.
Resize Vamp Lips01 to 25% and place on the left by the frames.
Happy with everything, then merge visible and resize.
Add your copyright and name and you are done.
Hope you enjoyed doing this tut.
 
 
 

Sunday, September 9, 2012

Autumn Feeling FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Alex Prihodko.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap kit Autumn Fall by Eileens Design HERE
Font Dear Joe Four 
WSL_Mask 238 HERE
Drop Shadow usually V2 H2 50 black

Let's get started
Remember to add your drop shadow as you go along.
 
Open a new image size of choice, I usually do 800 x 800,
more room to work on.
Paste paper #2, duplicate and change the blend mode to burn and merge down. Apply your mask, and delete.
Resize element #26 to 90% and paste, duplicate, apply gaussian blur at 5, change the blend mode to burn, merge down.
Take your magic wand, click inside and expand by 5, paste paper #2, invert and delete, move below frame. Duplicate and change blend mode to burn, merge down.
 No not deselect yet, resize your tube if needed and copy and paste, hit the delete key on your keyboard.
Duplicate, gaussian blur at 5, change the blend mode to overlay or what you prefer, merge down.
Resize element #19 to 50% and place on the right side.
Resize element #24 to 50% and place on the right.
Resize again to 50% and move to the left side of your tag and duplicate and place where you like.
Resize element #29 to 90%, place at the bottom of the frame.
Resize element #25 to 50% and duplicate a couple of time and place in random areas.
Also resize element #30 to 90% and place at the bottom.
Resize some of the leaves to a smaller size and place where you like the look.
Resize element #1 to 50% and place on the left side.
Resize your tube if needed and copy and paste, add your drop shadow.
Copy and paste element #35 on the left side above your tube layer.
Merge visible and resize your tag now, and
add your copyright and name.
Hope you have enjoyed doing this tut.