Tuesday, November 13, 2012

Country Girl Christmas FTU


 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey.
You need a license to use this art work. Please do not use without a license.
I purchased mine when he was with PTE but they have since closed.
You can find his art at his store HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Christmas in Norway
by Eileens Design  HERE
Monti Mask Blind 1 HERE
Xero Filter-Porcelain and Clarity
Font Tagettes
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image, size of choice
I usually make mine 800 x 800 and resize later.

Copy and paste element #52, the heart frame, take your magic wand, click inside, expand by 15, paste paper #1, invert and delete, move below your frame.
Resize element #27 to 50%, place on the paper layer, duplicate, mirror, erase any showing outside the frame area.
Duplicate again and move below the paper layer and move to let some of it show paste the frame layer, duplicate and mirror.

Paste your tube, resize if needed, move below the frame, duplicate, move above the frame and erase any over the frame. Apply the Xero filter-Porcelain to both tubes first, then Clarity.

Paste element #37, flip, rotate to the left or right 10%, duplicate and mirror, adjust to your liking.
Erase the square edges on both pieces and erase some from the bottom, then merge visible and move to the bottom layer.

Paste element #33, flip, position how you like, duplicate and mirror and adjust on the other side, merge down.

Being on the frame layer, paste element #33 at the bottom part of the frame.
Resize element #2 to 75% and place at the bottom of the frame. Resize element #71 to 30%, rotate to the right 10% and place behind the ribbon layer merry christmas.

Resize element #36 to 30% and place on the left side behind the merry christmas layer, duplicate and mirror.
Resize element #32 to 35% and place on the left side behind the box.

Resize element #5 to 60% and place on the right side above the merry christmas layer. Resize element #64 to 50% and place on the frame, duplicate and mirror and move to the lower left side, erase the string on this one.
Resize element #54 to 25% and place on the right side.
Resize element #6 to 30% and place on the left side on the frame, duplicate and move down some.
Resize element #18 to 60%, place on one side, duplicate and mirror to the other side.
Resize element #17 to 40%, place on the left side, move down to just above the first paper layer, duplicate and mirror.
Duplicate a couple more times, flip and place where some will show just below the merry christmas ribbon layer.
Resize element #15 to 25% and place at top by the stars.
Resize element #60 to 35% and place just above the lantern layer on the left, mirror and duplicate.
Add any other elements that you would like.

Once happy with it all close off your background if using one, then merge visible and resize.
Now add your copyrights and name and any wordart you would like to add.
Save your tag as a png and you are done.

Hope you enjoyed doing this tut.

Monday, November 12, 2012

Waiting for Santa FTU

 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
 WSL_Mask 78  HERE
 Scrap by Eileens Design Waiting for Santa HERE
Font Santa's Sleigh
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*
 
Open a new image 800 x 800, can resize later.

Copy and paste paper #1 and apply your mask, delete and merge group. Resize it later to fit your tag.

Copy and paste element #40, resize to 85%, then take your magic wand, click inside, expand by 5, paste paper #2, invert and delete. Paste element #56 and hit the delete key on your keyboard, now select none.
Copy and paste element #79, move to the bottom layer and over to the left side of frame. Copy and paste #70 and place over the tree, erase any edges that stick out to far.
Paste element #39, mirror, move to the bottom layer and over to the right side.

Being on the top layer now, apply your tube, resize if needed, duplicate, Adjust, blur, gaussian blur at 5, change the blend mode to hard light, merge down.

Resize element #16 to 75% and free rotate to the left and place toward the bottom, use your pick tool to rotate a little more to the left. Resize element #15 to 75% and free rotate to the right and place at the bottom also.
Resize element #29 to 45%, free rotate to the right and place at the bottom.
Resize element #51 to 40% and place on the left side, take your magic wand click in the frame area, expand by 3, paste paper of choice, invert and delete.
Copy and paste element #46 and place the bright light on the paper of the lantern and the rings of light over your tube.
Resize element #54 to 40% and place behind the lantern and over to the left a bit, duplicate and move to the right, about in the middle. Resize element #73 to 75% and place on the left side behind the lantern. 
Resize element #82 to 35% and place on the right side.
Resize element #53 and #71 to 50% and place on the right side however you like the looks of them. Duplicate #71 and resize again to 75% and place. Resize element #64 to 35% and place where you like.
Resize element #3 to 35% and place on the right side.
Resize element #1 to 30% and place on the right side, move to the bottom layer.
Resize the bunny rabbit to 40% and place on the left.
Add any other elements that you would like.
Once happy with it all, close off any background you used, then merge visible and resize.

On the wording I added noise at 50% and gave it a slight bevel effect. Then I did select, float, defloat, expand by 2, new raster layer and filled with a color from the tube, move below the wording.

Once resized, sharpen once and add all your copyrights and name and you are done.
Hope you enjoyed doing this tut.


 

Sunday, November 4, 2012

Alluring FTU


 
 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Jose Cano.
 You need a license to use this art work.
Please do not use without a license. You can find this art at SATC HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Swag Alley Blues
By Magik HERE
Vm Extravaganza-Transmission
EyeCandy Impact-Chrome
xero filter-Soft Mood
Monti Blinds Mask HERE
Font of choice, I used Simply Glamorous  
Drop Shadow usually V2 H2 50 5

*Remember to add your drop shadow as you go along*

Open a new image, size of choice, I do 800 x 800

Copy and paste paper #1, apply your mask, delete and merge group.
Cope and paste the glitter splatter.
Copy and paste the mirror ball.
Go to your preset, select the Ellipse, background null, forground any color, width at 30, draw a circle around the mirror ball.

(If you do not have the EyeCandy Impact, then use a color that matches your tag and give it a bevel effect or use EyeCandy4000-Chrome and play around with the settings)

Apply EyeCandy Impact-Chrome, settings set on Indoor Chrome, Basic set on Office Space and apply with these settings
54.45, 64, 22.33, 0
inside selection marked.
Then go to Adjust, Hue and Saturation, colorize with these settings
Hue 134,  Saturation 150
or select a color from your tube if using a different one.
Take your magic wand and click inside your frame circle, expand by 3, paste your closeup, invert and delete.
Depending on your tube, you may want to mirror yours, I did mine.
Change the blend mode to Luminance (L) and apply the
xero filter-Soft Mood, lower the opacity to 70, then merge down with the mirror ball.
Apply Vm Extravaganza-Transmission with these settings
44, 0, 20 then sharpen once.
Paste your tube and resize if needed and place on the right side.
With the size at 150, type out the word Alluring using Impact, it comes with psp, use any color you prefer.
 Then select all, float, defloat, expand by 3, new raster layer, fill with white, select none and move below. Add noise to the white at 100%.
Place the sparkles behind the wordart.
Then type out Attractive and fasinating, using Satisfaction or one of your choice and then do the same again with the white, except expand by 2 this time and move below.
Resize the cat to 40% and mirror, place behind the wordart on the right side.
Resize the briefcase to 35% and place on the left side behind the wordart. Resize the heart to 25% place behind the wordart on the left and rotate to the left 20%.
Resize the cuff chain to 35%, place on the wordart where you like and then erase some of the chain to make it look like it is hanging over it, duplicate and move over and down some on the other side.
Resize the lips to 35% and place on the left side. Resize again and place by the wordart.
Resize the roses to 40%, free rotate to the left at 90 and place at the bottom of the wordart, duplicate and mirror.
Duplicate a couple of times and rotate back 90 to the right and place behind the briefcase.

Resize flower #1 to 30%, apply Mura Meisters, Copies-Encircle at default setting, then go to Image, resize to 110, move this layer down to below your mirror ball.
Once happy with everything merge visible and resize.
Now add your copyrights and name and you are done.
Hope you enjoyed doing this tut.


 

Autumn Cowgirl


 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of PinUp Toons.
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Autumn Harvest
by A Cowgirl's Creations  HERE
Mura Meister-Copies
WSL_Mask275
Font St Charles 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image, size of choice
I usually make mine 800 x 800 and resize later.

Copy and paste paper #4 and apply your mask, delete and merge visible.
Paste the wall and resize to 85%, change the blend mode to hard light, duplicate 3 more times and move each one down below the other until the paper is covered, merge visible.
Copy and paste the scarecrow and resize and place to the left and lower the opacity to about 70.
Copy and paste the chain link fence, and then the fence.
Resize the grass to 60%, duplicate and place on the fence on both sides.
Copy and paste the mailbox and place on the right side.
Resize the trike to 60% and position in front of the mailbox.
Resize the country crate to to 45% and place on the left side.
Resize the bucket to 35% and place by the crate.
Duplicate the mailbox, resize to 50%, erase the mailbox part and the base, we just want the branches, place one behind the crate on the left, duplicate and mirror and place behind the trike on the right.
Resize the weed to 50%, duplicate and place how you like the looks of them.
Duplicate a couple more time, erase some parts and just move them in different areas.
Resize leaf #2 to 20% apply Mura Meister-Copies, line rotate
with the first number on 12, all else at default.
Go to Effects, Distortion, wave with these settings
0, 100
2, 50
Transparent
place at the bottom of your tag, above the mailbox layer, duplicate and mirror and adjust to your liking.
Erase any of the ends that have a square edge on them.
Paste the bubbles layer.
Resize acorn #2 to 10% and being on the top layer, duplicate several times and place where you like.
Resize the butterfly to 10%, duplicate as many times as you like and rotate one a little and then place them all where you like the looks of them.
Copy and paste your tube, resize if needed and place where you like the looks of yours.
Once happy with it all close off your background if using one, then merge visible and resize.
Now add your copyrights and name and any wordart you would like to add.
Save your tag as a png and you are done.

Hope you enjoyed doing this tut.


 

Thursday, November 1, 2012

Be Thankful Forum Set

 

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of PinUp Toons.
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO HERE
 
Supplies Needed
 
I used PSPX...but any of them should work.
Scrap Pumpkin Patches Blog Train
 by Nette's NightOwl HERE
Xero Filter-Porcelain and Clarity
Font Coneria Script 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*
Open a new image 600 x 250
 
Copy and paste paper #1 and then crop.
Resize the tree to 40% and place on one side, duplicate and mirror.
Resize the barn to 35% and paste in the center.
Resize the fall group wheel to 25% and place on the right side of the barn.
Resize the scarecrow pumpkin fence to 20% and place on the left side, duplicate and mirror and erase the scarecrow off this one. Move this one below the wheel layer.
Resize the watering can with leaves to 8% and place on the left side of barn.
Paste the leaf border and flip and move to the bottom and adjust how you like the looks of them.
Copy and paste your tube and resize if needed and move below the leaf layer.
I resized the branch layer to 25% and moved below the fence layer and duplicated a couple of times and place to where I liked the looks of them.
Once happy with it all merge visible and add the xero filter- Porcelain first and then Clarity (optional).
For the frame, select all, new raster layer, fill with a color from your tube, contract by 2 and delete, merge visible.
Add your copyrights and any wording and name and you are done.
I added a bevel to the wordart and noise at 25%
Bevel settings I used were
Bevel2, width 2
15, 3, 5, 0
273, 34, 42
 
For the Avator
Copy and paste your finish tag into a new image 150 x 150 and resize to 75%
 and position where you like, sharpen and merge visible.
For the frame, select all, new layer, fill with color of choice,
modify, contract by 2, delete and merge visible.
 
Hope you enjoyed doing this tut.

Monday, October 29, 2012

Autumn Dreams



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of PinUp Toons.
 You need a license to use this art work. Please do not use without a license.
You can find this art at CDO HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap by Amy Marie HERE
Xero Filter-Soft Mood
Wordart at CM HERE
Font Before the Rain 
WSL_Mask 84 HERE
Drop Shadow usually V2 H2 50 black

Let's get started

*Remember to add your drop shadow as you go along*

Open a new image size of choice, I usually do 800 x 800

Copy and paste paper#18 and apply your mask, delete and merge group.
 Copy and paste paper#22 and apply the mask again, delete and merge group. Resize this mask to 95%.
Copy and paste tree #4 and move to either left or right side,
add xero filter-Soft Mood, duplicate and mirror.
Copy and paste tree #4 again, resize to 85% and place off side of the bigger tree, duplicate and mirror.
Copy and paste tree #2 and place on the right, then copy tree #3 and place on the left, adjust to your liking.
Copy and paste the leaf pile, duplicate and mirror.
Resize the bench to 70% and paste in the center of your tag, go to
Adjust
Hue and Saturation, colorize
and use these settings
Hue 14  Saturation 163
Resize element #27 to 65% and place below the leaf pile layer on the right and move out almost to the edge of the pile or where you like the looks, duplicate and mirror.
Duplicate a couple more times and resize to 75% and place in different areas. 
Resize element #17 to 40 and place in front of the mushrooms you just placed on the right.
Resize your tube to 75% if using the same one I am and place on the bench.
Resize the mug to 15% and place on the bench next to your tube.
Resize element #14 to 25% and place on the log, duplicate and mirror.
Resize element #21 to 45% and duplicate several times and place how you like the looks. Maybe move some down a layer or so and place.
Resize element #16 to 30# and place on the left side, below the acorn layer and make any adjustments.
Duplicate a couple of times and resize smaller and place where you like the looks.
Resize element #26 to 20% and place in the trees where you like, duplicate and mirror.
This next step is optional if you would like to do it.
I took tree #3, change the blend mode to hard light and moved below the other tree layers and duplicated and mirror and placed into position. This just gave it a bit more of the darker orange to show thru and then sharpen once.
Resize element #28 to 50% and place on the trees to make it look like the leaves are starting to fall, duplicate a couple of times and move around.
Resize the wordart to 75% and place at the bottom part of your tag.
I resized the basket to 30% and place on the left side.
Add any other elements that you would like.
Once happy with everything, close off your background if using one and merge visible.
Resize your tag and add your copyrights and name and you are done.
Hope you enjoyed doing this tut.

 

Saturday, October 27, 2012

The Beauty of Autumn


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ellie Milk.
This was a prepaid project and is an Exclusive. 
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD HERE
 Supplies Needed
I used PSPX...but any of them should work.
Scrap by Sky's The Limit Blog  HERE
Scrap kit Majestic Autumn HERE
Wordart at CM HERE
Font Scriptina Pro
WSL_Mask 84 HERE
Drop Shadow usually V2 H2 50 black
Let's get started
*Remember to add your drop shadow as you go along*
Open a new image size of choice, I usually do 800 x 800

Resize paper #15 to 23%, paste on a new layer, apply your mask, delete and merge.
Resize paper #20 to 20% and paste and apply the mask again, delete and merge.

Resize the tree to 20% and place on the left side.
Resize the lamp to 25% and place on the left side.
Duplicate the tree and resize to 85% and move in front of the lamp and adjust to where you like the looks of it.
Resize Scribble tree 1 to 25%, change the blend mode to hard light and add your drop shadow.
Duplicate and mirror and move below the trees and light on the left.
Reopen the tree again, not the scribble one, the one you used before, resize to 15%, rotate 90 degrees one way or the other, flip and place at the bottom, duplicate and mirror
Resize the cluster to 15% and place on one side, duplicate and mirror.
Open the mushrooms and resize to 15% and place on the left side.
Duplicate, mirror, and move below the cluster layer.
Duplicate again, resize to 65% and move below one of the cluster layers and position where you like.
Take leaf #8, resize to 50% and move to the bottom layer and place on one side, then duplicate and mirror and adjust into place.
Resize the acorns to 10%, duplicate 2 or 3 times and being on the top layer, place them in different areas.
You might want to move some down a few layers, just use your imagination and get what you like the looks of.
Resize the butterfly to 5% and rotate to the left at 30 degrees and duplicate a couple of time and move them around.
Copy and paste your tube and resize as needed and place on the left side.
Copy and paste the wordart and move to the bottom and add your drop shadow.
Once happy with everything, close off your background if using one and merge visible.
Resize your tag and add your copyright and name and you are done.
Hope you have enjoyed doing this tut.