Saturday, May 4, 2013

Pretty In Pink FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Nocturne.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Cameo Heart by Wicked Princess  HERE
She has her scraps on another link so just click her notice and it will take you to the scrap on the 2nd page.
The Fantastically Free Blog Train
Xero Filter-Porcelain and Clarity
Sparkle Mask 5 by Jenny at Creative Misfit Creations HERE
Font Great Vibes 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image, size you like working with
I use 800 by 800 and resize later, fill with white.

Paste paper #3 and apply your mask and delete.
Sometimes I will go back and adjust my mask larger or smaller to fit the tag better.

Paste frame #3, click inside with your magic wand, expand by 3, paste paper #6, invert and delete. Do not deselect yet, paste your close up tube and move how you like it, delete and select none.
Duplicate your tube, gaussian blur at 4, change the blend mode to overlay or one you prefer, merge down and add your drop shadow. Apply the xero filter-Porcelain.
Resize your tube and mirror and place on the left side, erase the tip end of the legs over the frame loop.
Apply the xero filter-Porcelain first and then Clarity.

Paste the chair, mirror,  resize to 75% and place on the left behind your tube layer.

Paste flower #2 behind your tube layer on the left just above the mask layer, duplicate, mirror and flip, erase some of the greenery on this one, refer to my tag.
Paste flower #3 and place on the upper right side, erase the greenery.
Resize the ribbon to 75% and place below your flower layers and adjust how you like it.
Paste the scatter circles and place on the right, erase all but the biggest one. Duplicate, mirror and flip and erase more other than the one small one showing at the bottom. Duplicate again and move to the top, then merge all the circles and go to Adjust, Hue and Saturation, colorize with these settings 226 and 70.

Resize the shoe to 40%, duplicate and mirror and move both to the right side, erase some of the pearls on the shoe that is in back. Resize the purse to 40% and place behind the shoes.

Resize the dog to 35% and place where you like it.

Take the bling doodle and place below the mask layer,  around the top and bottom circles, erase the parts you do not want showing.
Resize the butterfly to 15%, free rotate to the left 25% and place where you like, duplicate and move around to your liking.

Add any other elements that you would like and once happy with your tag, close off your background and merge visible.
Resize first and then add your copyrights and name and you are done.

Hope you enjoyed doing this tut.

Thursday, April 25, 2013

Sweet Summer FTU

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap by DigiCats and (Dogs)  HERE
The Fruit of our Labor Blog Train
Mura Meister-Copies
WSL Mask 84 HERE
Font Great Vibes 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image, size you like working with
I use 800 by 800 and resize later.
Paste paper #4 and apply your mask, resize mask later if needed to fit the tag better.

Paste the DCD-FooL Strawberry element, resize to 50% and apply Mura Meister-Copies,  set on Encircle, leave everything else at the settings it is set at.
Take your magic wand, click inside, expand by 5 and paste paper #4, invert and delete, move below the frame.

Copy and paste ribbon #2

Copy and paste DCD-FooLFrame #1, click inside with your magic wand, expand by 2 and paste paper #2, invert and delete, but do not deselect.

Resize your tube if needed and paste one on one side, and then mirror your tube and paste on the other side, delete each one, erase any parts you do not want showing in each frame area.

Merge your tube layers together, duplicate, gaussian blur at 4, change the blend mode to hard light and merge down.
Resize the flower branch 2 to 90% and place just above the mask layer, duplicate and mirror, adjust to your liking.

Being on the top layer, resize the brown jug to 50% and place on the left side and then resize the strawberry cupcake to 35% and place on the left side by the jug.

Resize bugsie 1 to 15% and rotate to the right by 15 degrees and place where you like, duplicate once or twice and place.

Copy and paste the glitter and resize to 90% and place on top of all layers.
Resize bird 1 to 40%, mirror and place on the right side, erase some of the legs that is showing over the frame layer.

Resize the tag to 50% and free rotate to the left by 25 degrees and move up to the left side of your tag.

Add any other elements that you would like and once happy with your tag, close off your background and merge visible.
Resize first and then add your copyrights and name and you are done.

Hope you enjoyed doing this tut.


Friday, April 12, 2013

Happy Spring FTU

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of PinUp Toons.
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO Store HERE

Supplies Needed
I used PSPX...but any of them should work.
Template Happy Spring by TwyztedT's Playroom HERE  
WSL Mask 302 HERE
Scrap Quiet Bunnies by Killer Kitty  HERE
Part of Creative Crazy Silent Spring Blog Train
Xero Filter-Porcelain and Ultraviolet
penta.com filter-jeans
Font Satisfaction 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*


Open your template, duplicate and close the original, delete the credits.

Go to image, canvas size and change to what you prefer,
I usually do 800 x 800 and resize later.

Paste paper #12, apply your mask and delete.

Select Raster layer #3 on the template, resize paper #9 to 80%, paste, invert and delete.
Raster layer #4 add more noise to it at 50%
Raster layer #2, resize paper #7 to 90%, paste, invert and delete.
Raster layer #10, paste paper #17, invert and delete.
Raster layer #5, paste paper #12, invert and delete, keep it selected and paste your close up tube and delete.
Copy Raster layer #5, paste paper #11 invert and delete, keep selected, having mirrored your tube, paste and delete.
Add the penta.com filter-jeans at default settings to the papers.
On your tube layers, duplicate, gaussian blur at 4, change the blend mode to hard light, merge down and apply Xero filter-Porcelain first and then ultraviolet with these settings
127, 127, Highlights, 5
On all the white frames I added noise at 50%.
Raster layer #7 the flowers, select and resize paper #1 to 75% and paste, invert and delete.
Move the wordart down a bit, select and paste paper #12, invert and delete.
Go to effects, apply inner bevel shape #2, width 4,
0, 2, 0, 0
48, 50, 30 color white.
Then select all, float, defloat, new raster layer, fill with white and move below the wordart layer.
Paste the Doodle swirl under the wordart layer and mirror.
Paste the Pink embellishment in the center of the two frames.
Resize Sparkle #2 to 75% and being on the tube layer, paste there.
Resize the kitty to 40% and being on the top layer place on the left side.
Resize the mushrooms to 25% and place below the wordart.
Paste your full length tube and mirror an move to the right side.

Once happy with it all close off any background used and merge visible and resize.
Add your copyrights and name and thats it.

Hope you enjoyed doing this tut.

Tuesday, April 9, 2013

She's a Bookworm FTU

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  PinUp Toons.
You need a license to use this art work. Please do not use without a license.
You can find this art at CDO Store HERE

Supplies Needed
I used PSPX...but any of them should work.
Cluster Frame by Julie's Jazz Designz HERE
Made from a PTU kit called Bookworm by Lexi Creations HERE
WSL Mask 302 HERE
Mura Meister Filter-Copies
Font Satisfaction 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

This is an easy peasy one to do

Open the Cluster Frame, duplicate and close the orginial.
Go to image, canvas size and change to what you prefer,
I usually do 800 x 800 and resize later.

Flood fill with a color of choice, then type out book worm, apply Mura Meister-Copies-Tiling (angle) and only change the gap setting to 3, merge down with your color layer and apply your mask, delete.

Take your free hand selection tool and draw around your frame, new layer and fill with #e0d0bc or color of choice and move below the frame layer.

Do not deselect yet

Paste your tube, duplicate and mirror, adjust how you would like them, then invert and delete. Merge the 2 tubes together and be sure they are below the frame layer. Apply Mura Meister-Copies-*Line, with the 1/n fade out box checked.
Select none now.

Duplicate the tube layer, Adjust, gaussian blur at 4 and change the blend mode to mutiply and merge down.

Paste your tube on top of the frame layer, duplicate, gaussian blur at 4, change the blend mode to overlay or whatever you prefer.
Once happy, merge and resize your tag.

Add your copyrights and name and thats it.

Hope you enjoyed doing this tut.

Sunday, April 7, 2013

Elegant Spring FTU

 
 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Misticheskaya.
You need a license to use this art work. Please do not use without a license.
You can find this art at PFD HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Elegant Spring by Irish Princess Designs HERE
Thanks for sharing
WSL Mask 222 HERE
Font Great Vibes 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*



Open a new layer with whatever size you are use to working with.
I always use 800 x 800 and resize later
Paste paper #10 and apply your mask and delete.

Resize the log to 85% and paste.

Paste Frame 2, resize to 75% and move to the right a bit.
Using your magic wand, click inside the frame, expand by 5, new raster layer, fill with a color of choice, I used #fceec4.
Select none and move below the frame layer. Add a light texture to the paper.

Paste the grass and resize larger to 105%.

Resize and paste your tube and place on the grass part.

Climbing vine, resize to 70% and free rotate to the right 20% and place on the right side of the frame, duplicate and mirror.

Resize the grass n rock to 50%, place on the left side below the grass layer, duplicate and mirror and place where you like.
Paste the tree on the left below the grass n rock layer.
Resize the spring sign to 50%, free rotate to the right by 10% and paste behind your tube on the right side.
Resize the dandelion to 15%, duplicate twice and place where you like them, just below the grass layer.
Resize the floaties to 20% and paste above each dandelion.
Resize the spray to 50% and place on the grass, duplicate and mirror.
Resize the plant to 25% and place behind the grass layer on the left and duplicate and move it to the right.

Resize the lantern to 75% and place behind your tube on the right, below the spring sign layer.

Resize the bottle to 30% and place on the right just below the grass layer, duplicate and mirror and move down a few layers.
Resize the tree to 50% and place inside the frame.
Resize the bubbles to 50% place inside the frame behind the tree, duplicate and place how you like.

Resize the twig to 50%, free rotate to the left 90%, place just above the bottle layer on the right.

Resize your tag and add all copyrights
Add your name and that is it.

Hope you enjoyed doing this tut.

Thursday, March 7, 2013

Girls Really Do Rock FTU

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  KiwiFireStorm.
You need a license to use this art work. Please do not use without a license.
You can find this art at The PSP Project Store HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap by Vix-Pinked HERE
Gems Mask 52 HERE
Template 140 by Pooker HERE
Xero Filter- Clarity
EyeCandy5-Impact-Chrome
EyeCandy4000-Gradient Glow
Vm Extravaganza-Transmission
Font Simply Glamorous 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new layer with whatever size you are use to working with.
I always use 800 x 800 and resize later
Open your template, duplicate and close the original, delete the credits.

Paster paper 14 and apply your mask and delete.
Click the black strips on the template bottom, apply EyeCandy5-Impact-Chrome, Settings on Indoor, Platinum and Basic, Indoor Office Space with default settings.
or used EyeCandy4000-Chrome and adjust the settings to your liking.
Then to color, go to Adjust-Hue and Saturation, colorize with these settings
Hue 255, Saturation 145
The black dot layer, select all, float, defloat, add a new raster layer and fill with a color from your tube, add noise at 100%, select none.
Select the grey squares, paste paper 22, invert and delete.
Apply the Chrome setting as before on the Red Circle layer.
White circle paste paper 10, invert and delete.
Red dotted circle, add noise at 100%, change the color to match your tube.
Select the Black rectangle and paste paper 22, invert and delete.
Apply the Chrome to the Grey strips and color as before.

Red Rectangle apply the EyeCandy5 Impact-Chrome with same settings as before and colorize.

White dotted line add noise at 100% and sharpen.

Select the white squares, paste paper 14, invert, delete.
Do not deselect yet, mirror your tube then paste and delete, change the blend mode to screen or what you prefer.
Merge tube down to paper layer and apply the VM Extravaganza-Transmission, 40, 0, 20

Black rectangle paste paper 22, invert and delete.
The tiny white squares leave white and add noise to them.

Paste your tube and resize and place where you like.
Copy and paste the pink doodle swirl and move to the bottom layer and move to where you can see it, then duplicate and flip.
Resize the pink splatter glitter ball to 75% and place, then duplicate, mirror and flip.

Paste the chicken wire, duplicate and flip and mirror.

Paste the Pale pink Tulle just below the red circle layer on the right side, duplicate and mirror and move down some.

Resize the pink skull to 50% and being back on the top layer place it on the upper left of your tag.

Paste the pink ribbon on the right side of your tag.
Resize the pinked string bead to 55% and place under the skull layer on the left.

Select the wordart you would like to use and resize if needed and place on the right side on top of the tube layer, add a fat gradient white glow with EyeCandy4000-Gradient glow
3, 25, 100
Add one of the sparkles to the tag, then merge visible and apply xero-Clarity to the whole tag.

Resize your tag and add all copyrights
Add your name and that is it.
On your name, select all, float, defloat, expand by 2, add a new raster layer and fill with white, move below your name layer.

Hope you enjoyed doing this tut.

Tuesday, March 5, 2013

Cute Bunny FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Danny Lee.
You need a license to use this art work. Please do not use without a license.
You can find his art at SATC store HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Scrap by Addictive Pleasures called Bunny HERE
Mask 1 by Ella at CMC HERE
Xero Filter-Porcelain and Clarity
UnPlugged Tools-Interlace
Font Phraell for name 
 
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new layer with whatever size you are use to working with.
I always use 800 x 800 and resize later
Paste the disc ball and resize to 87%, erase the chain and top base.
Paste the starry circle and resize to 40%, then
copy and paste frame 5 and resize to 40%, sharpen both.

Take your magic wand, click inside the frame, expand by 3, paste paper #10, invert and delete, no not deselect yet.
Paste your tube, hit the delete key and now select none.
Apply xero filter-Porcelain to your tube, merge the tube down to the paper layer.
 
Now apply Unplugged Tools-Interlace with these settings,
2, 30, 1, 0

Open a new layer
 Fill with color of choice or the one I used #e94b87, and apply your mask, delete.
Paste the sparkles, then paste the beads 3. Duplicate the beads 3, mirror and flip.

 Paste the starry circle, then frame 5.
Magic wand, click inside the frame and paste paper #10, invert and delete.  Paste the glitter onto the paper layer.

Now copy and paste the tag you make before and place on one side, duplicate and mirror.
Resize the bunny with the egg on his back to 70% and place  over to the right side.

Resize tube to 80% and paste where you like it.

Resize the bunny with the bow to 75% and place on the left side, below the tube layer.
Paste bunny 2 and adjust to your liking.
Paste ribbon #2 and move below the rabbit layers.

Resize the hanging beads to 82% and place on the left side, erase any part hanging over the rabbit.

Resize the buckle bow to 50% and place on each side.
Paste the candy, then duplicate and resize to 50% and place how you like them.
Resize the bunny heart to 50% and place behind the rabbits.
Resize the balloon to 50%, free rotate to the right, 25 degrees and place on the right side below the rabbit layers.
Add any other elements that you would like.
Once happy merge visible and apply the xero filter-Clarity.

Resize your tag and add all copyrights
Add your name and that is it.
On your name, select all, float, defloat, expand by 2, add a new raster layer and fill with white, move below your name layer.

Hope you enjoyed doing this tut.