Wednesday, September 23, 2015

CT PTU Tags for "LYS ISANGE" and "MARIEL DESIGNS Kits"


Double CT PTU Tags for "LYS ISANGE" and "MARIEL DESIGNS Kits",
 Using the Awesome tube called " LUDMILLA" and
using the matching AWESOME kit called " LUDMILLA".
This  Tube and kit is AWESOME, you will LOVE them.
 You can find this art  HERE
or HERE or HERE or HERE
 
Scrap kit LudMilla by Mariel Designs HERE or HERE or HERE

 

The Hunt

 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey,
the tube is called The Hunt 

You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Thankful Harvest by BLT DeZignz  HERE 
DD Fall Mask 1 HERE
Check out the rest of her blog HERE
Filters
Mura Meister Copies-Encircle
Xero-Soft Mood and Clarity
Unplugged Tools-Interlace

Font of Choice, I used KG Fall for You

Drop shadow is usually V-2 H-2 Black, 50, 7
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 11, apply your mask, delete and merge group.
 
Resize the Swirl to 75%, apply Mura Meister Copies-Encircle with the first number on 12.
 
Paste frame 1, duplicate, change the blend mode to burn. 
Then click inside with your magic wand, expand by 5, paste paper 14, invert, delete, do not deselect yet. Take your close up tube, mirror, paste, delete, select none.
Apply to your tube, the Xero Filter-Soft Mood first, then Clarity.
Then apply the Unplugged Tools-Interlace to the paper  and your tube with these settings
1, 16, 1, 0
 
Paste the foliage, take your Pick tool, holding down the shift key, move your arrow onto the square on the top one, pull down until it is as low as you like.
Do this on the other side also, keep pulling each corner down until it is as flat as you like, do not pull to the center, pull straight down, then move to the bottom and below the paper layer of the frame.
Duplicate a couple of times and move each one over more.
 
Paste your tube on the right side.
 
Paste branch 1 above the mask layer at the top, free rotate to the right at 90, resize to 75%, duplicate, mirror, duplicate again and move down on both sides.
 
Resize the barrel to 40%, place on the right below the tube layer.
Resize the pumpkin to 70%, mirror place below the barrel layer.
Resize the wheel barrel to 70%, paste toward the left more.
Paste the crow, mirror, resize to 35%, place on the left side in front of the wheel barrel.
 
Resize the pitcher to 40%, place on the left, below the wheel barrel.
 
Resize the leaves scatter 2 to 25%, place on the foliage at the bottom, duplicate a couple of times and move over some. Use your Pick tools like before if you want to make them lay flatter.
 
Resize the hat to 35%, place on the right side below the leaves layer.
Resize the ribbon to 60%, free rotate to the right, place at the top, move below the circle ring of flowers, duplicate, free rotate to the right, move on the side how you like, duplicate, mirror, erase the one end of each ribbon sticking out.
 
 Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 
That's it
Hope you enjoyed doing my tut.
 

 

Sunday, September 20, 2015

CT Tutorial LUDMILLA for Lys Isange and MarieL Designs

 
 

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange and the matching kit by Mariel Designs.
Tube is called MudMilla  and the kit has the same name.
You need a license to use this art work. Please do not use without a license.
 You can find this art  HERE
or HERE or HERE or HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Scrap kit LudMilla by Mariel Designs HERE or HERE or HERE
 RR Mask Set 2_1   HERE
Filters
Xero-Soft Mood
 
Font of Choice, I used Kirsty

Drop shadow is usually V-2 H-2 Black, 50, 7
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 6, resize larger to 130%, apply your mask, delete and merge group.
 
Paste frame 4, resize to 85%, move over to the right below the mask layer.
 
Paste the house on the left, resize to 95%, apply the Xero Filter-Soft Mood to the house.
Resize your tube to 30%, place on the right.
Paste your original tube on the mask layer and move over to the left, then being on the mask layer, select all,  float,  defloat,  invert and being on the tube layer, delete, select none, change the blend mode to soft light.
 
Paste element 64, resize to 85%, place on the right above your tube layer, duplicate, mirror.
 
Paste element 57, resize to 50%, move over to the left side.
Resize element 76 to 30%, place on the left by element 57, duplicate, mirror.
 
Resize element 9-2 to 30%, mirror and place at the upper part of the house.
Paste element 14 below the house layer, apply the Xero Filter-Soft Mood.
 
Resize element 16 to 40%, place on the right just above your tube layer, duplicate, mirror, move back over toward the right by your tube.
 
Paste element 35 below the tree layer, apply the Xero Filter-Soft Mood twice.
 
Resize element 73 to 65%, place at the bottom above the grassy layers, duplicate, mirror.
 
Resize element 30 to 20%, place on the skull on the left side, duplicate, mirror, place by the other skull.
 
Resize element 23 to 30%, place at the bottom off center.
 
Resize element 37 to 45%, place on the right below the tube layer, free rotate to the right at 10 degrees, duplicate, mirror, move below the house layer.
 
Resize element 87 to 75%, place at the top right side.
 
Resize element 7 to 15%, place below the grass layers, so just a bit of it is showing, duplicate if you like and move where you like.
 
Resize element 62 to 15%, place on the left on the sign.
 
Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 
That's it
Hope you enjoyed doing my tut.
 

 

Thursday, September 17, 2015

CT PTU Tags for "LYS ISANGE" and "MARIEL DESIGNS Kits


~Double CT PTU Tags for "LYS ISANGE" and "MARIEL DESIGNS Kits",
 Using the Beautiful tube called "FLORIA" and
using the Beautiful kit called " Remember".
This kit is AWESOME, you will LOVE it.

You can find the tube HERE or HERE or HERE or HERE
 
PTU Scrap kit "REMEMBER" by MarieL Designs  HERE

 
 

Tuesday, September 15, 2015

CT PTU Tags for "MARIEL DESIGNS Kits"


~~CT PTU Tags for "MARIEL DESIGNS Kits",
 using the Awesome kit called "CATERINA SUGAR SKULL".
This kit is AWESOME, you will LOVE it.
 
PTU Scrap kit "CATERINA SUGAR SKULL" by MarieL Designs  HERE

 
 
 

Monday, September 14, 2015

CT Tags for Lys Isange


CT Tags using the Beautiful tube Automne@Connection  © Lys Isange
She comes with many different color layers.
This tube is Exclusive at Tiny Turtle Designs
 
 You can find this art  HERE
 
 
 

Saturday, September 12, 2015

CT PTU Tags for "MARIEL DESIGNS Kits"

~~CT PTU Tags for "MARIEL DESIGNS Kits",
 using the Awesome kit called "Summer Bikini".
This kit is AWESOME, you will LOVE it.
 
PTU Scrap kit "Summer Bikini" by MarieL Designs  HERE