Wednesday, February 8, 2017

CT Tut Rock Star Babe


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Justice Howard.
Tube is called Rock Star
You need a license to use this art work. Please do not use without a license.
 You can find this art at the Mystical Scraps store, along with the matching Scrap kit
Tube HERE Scrap kit HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Rock Star by Toxic Desirez  HERE
AngieTaggedMe Mask 16  HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation-Pump Up the Volume by Simone HERE
Check out the rest of the blog HERE
Filters
xero-Soft Mood

Font of Choice, I used Rockers

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one of your choice, paste paper 7, apply your mask,
delete, merge group. Resize the mask to 90%.

Paste the stage, resize to 85%.

Resize the dance floor to 75%, paste on the stage floor and take your Pick tool, holding
the shift key and being at the back corner, pulling in and down until it fits the stage
floor, then do the other side, this will take a little patient getting it just right.
Just keep doing each side until it is how you like it.

Resize your tube to 65%, paste on the dance floor.
Duplicate your tube, paste on the mask layer on one side, duplicate, mirror,
change the blend mode to screen on both, then add the xero filter-Soft Mood.

Resize the crowd to 83%, paste behind the stage and adjust how you like.
Resize the guitar to 50%, free rotate to the right at 15 degrees, paste on the right
on the stage.
Resize doodle 2 to 50%, paste on the left speaker, free rotate to the right at 10 degrees, duplicate, mirror.

Paste stage light 1 and 2 below the crowd layer, at the top of the stage, add noise at 40%.
Resize speaker 1 to 30%, paste on the left in front of the stage skirt, duplicate, mirror.
Paste buttons below the tube layer on the bars of the stage toward the bottom.

Resize the flair to 20%, paste on the skirt of the stage.
Resize back stage pass to 25%, free rotate to the left at 15 degrees,
paste on the left by the speaker.
Resize the cd to 20%, paste on the right below the speaker, duplicate, move down a bit.
Resize the rock hand to 25%, paste on the left below the speaker and music.
Paste the splatter on the mask layer at the upper left, duplicate, mirror, adjust, duplicate each
one and move down.
Resize razorblade and chain to 25%, paste on the left below the back stage pass.
Resize the teddy to 25%, paste on either side at the bottom.

Paste the wire screen on the mask layer and resize to fit your tag.

If you want to Animate, merge your tag, resize, add your copyright and name.
Take to Animation shop and make as many layers as your animation is, this one
was 14 frames.
I resized the animation to 50% first, go to edit, select all, resize animation.
Then select all, copy, click on your tag, edit, select all paste into selected frame.
I pasted the animation 4 times, one on each speaker and then moved the other
two up higher.

That's it
Hope you enjoyed doing my tut.

Tuesday, February 7, 2017

Glam Love PTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Lysisange.
Tube is called Glam-Valentine
You need a license to use this art work. Please do not use without a license.
 You can find this art,  it is Exclusive to her store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Love by Lil Mz's Brainstorm  HERE
Template 24-Be Mine by Sylly Creationz HERE
Check out the rest of the blog HERE
DD NVM Mask_2  HERE
Check out the rest of the blog HERE
Filters
xero-Soft Vignette
EyeCandy 4000-Chrome

Font of Choice, I used Spring Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open the template, hold the shift and hit the letter d to duplicate, closed the original,
delete the credits.
Go to Image, resize all checked and resize to 90%, then Canvas 800 x 800.
I do this so the template is a bit smaller so the mask will show better.
Paste paper 20 on the bottom layer, apply your mask, delete, merge group.

Move the wordart Be Mine Valentine down and over to the right more, select, expand by 2
add a new layer, move below and fill with black, back on the wordart, merge down.

Will start working from the purple center down first.

Click on the purple circle, paste paper 29, invert, delete, paste your close up tube,
move to the right some, delete, select none, duplicate, go to
Adjust, Blur, Gaussian blur at 4, change the blend mode to Hard light, then
apply the xero filter-Soft Vignette with these settings
Elliptical, Foreground color
Diagonal dots
3, 2, 0, 255
merge down.
Select the pink circle, apply EyeCandy 4000-Chrome with these settings
Reflection Map-Outdoor tif
Bevel width 10.80
Bevel Height 50,
Smoothness 50
Thickness 0
Ripple width 72.00
Inside marquee checked
Then go to Adjust, Hue and Saturation, Colorize with both numbers on 255
or change it to a color you prefer.
White circle layer, add noise at 50%.
Dark pink circle, paste paper 8, invert, delete, select none.
Go to Effect, 3D Effects, Inner Bevel
Apply this bevel setting
Bevel Shape 2, Width 2
18, 2, 9, 10
315, 50, 30
color White
Large purple circle, paste paper 3, invert, delete, apply bevel.
Merge down Pink rectangle right  with the Pink rectangle left, select, paste paper 8,
invert, delete, apply bevel.
Merge White rectangle right down with White rectangle left, select, paste paper 2,
invert, delete, apply bevel.
Dark pink rectangle, paste paper 3, invert, delete, apply bevel.
Merge the pink square back with the pink rectangle back, paste love paper, invert,
delete, apply the bevel.

Now working with the layers above your close up tube layer.

Merge the white square right down with the white square left, add noise at 50%.
Merge pink square right down with pink square left, apply paper 3, invert,
delete, apply the same bevel.
Merge purple square right with the purple square left, paste paper 11 above the little hearts layer, invert, delete, resize your tube to 40%, duplicate the tube, mirror,
place the face of each tube on the square where you like, select the square, invert, delete each tube, select none. Making sure the tube is below the small wordart layer.
Change the blend mode to screen on these tubes. Apply xero filter-Soft Vignette with the same
settings as before.

Resize your tube to 40%, mirror, place on the left side.

Resize element 38 to 60%, paste at the top above the small tube square, duplicate, mirror,
move to the lower left square.
Resize element 25 to 60%, place on the small square on the right, erase some of the pin at the top of it.
Resize element 31 to 80%, paste on the large circle.
Paste element 22 at the bottom over the tube and erase some of the straight edge of the legs.
Paste element 11 below the paper layer of the large circle.
Paste element 61 above the mask layer on one side flip, duplicate, mirror, adjust to
your liking.
Resize element 10 to 25%, being on the top layer, paste on one side, duplicate, mirror.
Paste element 73 on the right below the tube layer, adjust to your liking.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Monday, February 6, 2017

Friends-Sunshine of Life


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Kajenna.
Tube is called Bear (Teddy Bear)
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Beary Sweet by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is AWESOME, with Yellows, Blues and Whites make up this cute kit.  
Honey bees, a cute bear and plenty of flowers
Template Friendship 2 by Sylly Creationz HERE
Check out the rest of the blog HERE
RD Mask Set 136_#2  HERE
Check out the rest of the blog HERE
Filters
xero-Fritillary

Font of Choice, I used Spring Time

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open the template, hold the shift key and hit d to duplicate, close the original,
and delete the credits.
First I went to image, resize all checked to 85%, then Canvas size 800 x 800.

Paste paper 10, apply your mask, delete merge group.

Resize your tube to 30%, mirror, place on the left side below the larger wordart and sun.
Then move the wordart over to the right more and the sun up to the upper right.

Working from the bottom on the template, select the green rectangle, paste paper 1 with the daisies showing at the bottom, invert, delete, select none.

Select the pink rectangle, paste paper 5, adjust, invert, delete, select none.
Merge the top yellow square down with the bottom right square, apply the
xero filter-Fritillary with these settings
5, 30, 100, 16
Merge the left pink square down with the pink circle, select, paste paper 6, adjust, invert, delete.
Select the blue square, paste paper 16.
Add noise at 25% on the white square.
Select the green square, paste paper 18, invert, delete.
Add a drop shadow of choice for the pixel wordart.
Blue, White and Green circles leave as is.
White diagonal square, add noise at 25%.
Pink diagonal square, paste paper 2, invert, delete.
Yellow strips add the same fritillary settings as before.

On the wordart Friends, go to Effects, 3D, inner bevel with these settings
Bevel Shape 2, width 2
18, 2, 9, 10
315, 50, 30
color white
Resize element 25 to 75%, paste on one side, duplicate, mirror, adjust, duplicate twice more,
move to just above the mask layer on each side.

Resize element 20 to 50%, paste on the right below the bear layer, erase the top boxes.
Resize element 105 to 50%, place on the left below the bear, duplicate, mirror, move below the
boxes, erase some of the stem showing below.
Resize element 3 to 25%, mirror, paste below the tube on the left.
Resize element 47 to 75%, paste on the left below pink circle layer, duplicate, mirror, move down some.
Resize element 53 to 50%, paste on the right below the daisy flowers.
Resize element 78 to 50%, paste on the right, adjust, duplicate, move more to the left.

Resize element 90 to 40%, paste by the boxes on the right at the bottom, duplicate, resize to 90%, move to the left more.
Resize element 70 to 15%, paste at the bottom by the branches.
Paste element 65 below the tube layer at the bottom.
Resize element 92 to 20%, paste on the right below the boxes.
Resize element 4 to 15%, paste on one side where you like, duplicate, mirror.

Resize element 55 to 35%, paste below the box layers and adjust behind the tube how you like,
duplicate, mirror, adjust on the left, duplicate, mirror, move below the daisy on the right.
Resize element 103 and 104 to 15%, place at the top how you like.
Resize element 64 to 95%, paste at the bottom below the twig layers.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Sunday, February 5, 2017

PTU Cooking Something Up


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Charles Bristow.
You need a license to use this art work. Please do not use without a license.
The tube I am using is called Chef Diabla.
and also using the matching kit to go with it.
 You can find this art and kit at Mystical Scraps Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
You can find the tube HERE
PTU kit Cooking Up Fun by Creative Scraps by Crys   HERE
Mask by Designs by Anorie #14 HERE 
Check out the rest of the blog HERE

Font of Choice, I used Kristen ITC

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 1, apply your mask, delete,
merge group, duplicate, merge down.

Paste frame 2, click inside with your magic wand, expand by 5, paste paper 6, invert, delete.
Paste element 30 on the paper layer on the right.

Paste element 16, move to the right more, resize to 75%.
Paste element 17 on the left, resize to 75%, duplicate, mirror, move below the table layer.

Resize your tube to 65%, paste on the chair on the left.
If using the same tube, resize the bear to 70% also and place at the bottom.

Resize element 24 to 40%, place on the upper right side.

Resize element 13 to 20%, place on the table below the tube layer and adjust how you like.
Resize element 12 to 20%, place on the table.
Resize element 4 to 35%, place on the table.
Resize element 10 to 10%, paste on the table below the measuring cup, duplicate, move to where it looks like it is falling off the bowl on the bear's head.

Resize element 42 to 45%, paste on the left and below the bear layer.
Resize element 14 to 35%, place by the books at the bottom.

Resize element 8 to 35%, paste on the right below the bear layer.
Resize element 5 to 65%, paste on the upper left below the chair layer.
Resize element 25 to 10%, paste at the top over the apron, duplicate, move down on the
waist of the apron.

Paste element 29 above the elements on the table.
Resize element 2 to 35%, free rotate to the right at 90 degrees, place on the chair on the right.
Resize element 18 to 70%, mirror, paste below the apron layer.

Resize element 7 to 25%, if you would like to add some writing to the card, do so now, then merge it down with the card before you paste by the knife, duplicate, move over some,
duplicate again,
free rotate to the left at 25 degrees, place below the knife on the left, duplicate, mirror,
move up between the measuring cup and rolling pin on the table.

Resize element 23 to 25%, paste below the cupcake on the right, duplicate, mirror.
Resize element 11 to 25%, place by the cards at the bottom left.

Crop your main tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Saturday, February 4, 2017

Country Cutie


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  VeryMany.
This is a cuties tube called Little Cowboy
You need a license to use this art work. Please do not use without a license.
 You can find this art at VeryMany store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Calamity by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is so just right for your Western tagging fun.
 RD Mask Set 143_2  HERE
Check out the rest of the blog HERE

Font of Choice, I used Docktrin

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 15, apply your mask, delete, merge group.

Resize your tube to 60%, paste about center.

Paste element 80 below the tube, duplicate, mirror, duplicate again, move down some, duplicate, mirror.
Resize element 69 to 90%, paste below the tube layer.
Resize element 11 to 45%, paste on the right below the wheel element.

Resize element 91 to 40%, place on the left above the wheel element.
Resize element 76 to 40%, place by the bucket.

Resize element 100 to 30%, paste below the bucket layer on the left, duplicate a
couple of times and place one by the barrel and the other one by the bucket.

Paste element 4 on the mask layer.
Paste element 88 on the left below the barrel layer, duplicate, mirror, duplicate again and move up some on the left.

Resize element 9 to 25%, paste on the right side above the wheel element.
Resize element 57 to 75%, paste below the horses on the left.
Paste element 19, being on the top layer.
Resize element 97 to 30%, paste below the chicken layer on the left.
Resize element 46 to 50%, paste on the right below the green weed, duplicate, mirror, duplicate again, move above the wheel element by the bucket.
Paste element 29 on the right below the horse layers and up some.

Resize element 39 to 75%, paste above the horse layer on one side, duplicate, mirror.
Resize element 52 to 25%, paste on the barrel on the right.

Resize element 7 to 25%, place on the boots on the left.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Wednesday, February 1, 2017

Froggy Love


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
This tube is called Froggy In Love
You need a license to use this art work. Please do not use without a license.
 You can find this art at the Arthur Crowe's Factory store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit Poppy by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is Awesome with lots of red to use for so many different types of tagging needs.
 DD NVM_4  HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation 219 by Simone  HERE
Check out the with of the blog HERE

Font of Choice, I used Harlow Solid Italic

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 15, apply your mask, delete, merge group.
Add noise at 25%.

Paste element 78, then paste element 15, adjust the solid heart part to be in the center of the frame.

Paste element 5, flip, move to the top, erase the little bit of stem on the left.
Paste element 24 on one side, move up a bit, duplicate, mirror, erase the parts in
the center of the frame.

Paste element 17, resize to 90%,  move to the bottom, duplicate, mirror.

Resize element 60 to 50%, paste on one side at the bottom, duplicate twice and move one
to the other side and one in the center.
Resize element 12 to 60%, paste above the white heart layer on one side, duplicate, mirror.
Resize element 72 to 60%, paste above the white heart layer on the right.

Being on the top layer, resize your tube to 55%, place a little off center and move the tube so
a little bit of the back part of the tube is  under the left grass/mushroom layer.

Paste element 92 on the left below the mushroom, erase any part showing at the bottom.
Resize element 93 to 60%, paste at the bottom, below the frog layer, duplicate, mirror, adjust.

Resize element 9 to 25%, paste in the center at the bottom, below the frog layer, duplicate, twice, move to each side below the leaves layers.
Resize element 43 to 70%, mirror, paste at the upper right.

Paste element 90 on the top layer on one side, erase any on the frog face, duplicate, mirror.
Resize element 44 to 35%, place on the right at the bottom.

If you would like to animate, merge visible with the white background, making sure you
crop your tag so no shadows or anything will be on the edge of your tag,
Add your copyright and name, copy to animation shop and make as many layers as the
animation has.
The one I used had 20 frame layers.
Go to edit, copy all on the animation, then go to the tag on the first frame, go to edit,
paste in selected frames.
Test your animation if happy save.

That's it
Hope you enjoyed doing my tut.

Tuesday, January 31, 2017

Butterfly Fairy


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Zebrush.
This is an Exclusive tube called psp_fairy
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap kit called Blue Morpho by Irish Princess Designs  HERE
You can also find this kit at one of these stores here, here, here
This kit is so Gorgeous, with different shades of blues, purples and more.
 RD Mask Set 136_4  HERE
Check out the rest of the blog HERE

Font of Choice, I used Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, paste paper 1, apply your mask, delete, merge group.
Paste element 50 on the mask layer.
Paste element 47 at the top of the columns.
Resize element 49 to 90%, paste lower on the columns.

Paste your tube about center, resize to 60%.

Paste element 14 at the bottom, above the tube layer, resize to 85%, erase some of the straight edge.
Resize element 52 to 50%, paste below the tube layer on the left.

Resize element 42 to 60%, mirror, paste below the grassy layer on the right, duplicate, mirror.

Resize element 59 to 75%, paste below the column layer on the left, duplicate, mirror.
Resize element 82 to 30%, paste at the upper right below the cloud layers.
Resize elment 8 to 30%, paste below the little cottage house on the right, duplicate, mirror, move below the swan boat.

Resize element 58 to 40%, paste on the right below the grassy layer to cover the bottom of the cottage house, duplicate, mirror, duplicate one, resize to 70%, move above the grassy layer where you like, duplicate again and move over some.

Resize element 26 to 25%, paste at the bottom being on the top layer.
Resize element 30 to 35%, paste below the swan on the left, duplicate, mirror.
Resize element 22 to 15%, paste by the lantern at the bottom.

Resize element 85 to 45%, paste below the column to the left of the tube a bit, duplicate, move above the columns and to the left, duplicate, mirror, adjust.

Paste element 33 on the top layer and move down, erase some of the larger sparkles on the tube, then duplicate and move below the tube and up.

Resize element 53 to 25%, paste at the upper left, below the sparkle layer, duplicate, mirror, move up to  the top layer sparkle at the lower right.

Resize element 76 to 50%, paste at the bottom on the grassy layer on one side, duplicate, mirror.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.