Tuesday, March 27, 2012

Summer Love FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Jennifer Janesko. You need a license to use this art work. Please do not use without a license. My license is from CILM, but they are closed now.
You can find this art at CDO HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used Memories of the Past by Stu and you can get it HERE
It is listed under Blog Trains, Jan 2012
Mask used DBV 133 and you can get it HERE
Xero Filter-Porcelain
Font used is Before the Rain 
Drop Shadow usually V2 H2 50 5

Let's get started
Open a 700 x 700 new image
Remember to add your drop shadow as you go along.
Copy paper #5 and apply your mask, delete and merge group.
Resize the frame element #5 to 75% and paste on top of the mask.  Take your magic wand, click inside and expand by 3 copy and paste paper #1, invert and delete, move below your frame. Do not delete yet, copy your tube of choice and position below the frame and then hit the delete on your keyboard, now deselect.  Duplicate your tube and apply gaussian blur at 4, blend mode overlay or soft light, which ever you prefer. Then on the original apply the xero filter-porcelain. Merge your tubes.
Resize element 3 to 55% and place behind the paper of the frame and rotate to the left 25% and place at the upper left part of the frame. Resize element #6 to 42% and place on the left side of frame, then duplicate flip and mirror. You will need to do a little adjusting to get it into place like you want it.
Take element #7, resize to 70% and place at the upper right behind the frame, then duplicate, flip, mirror and position. Resize element #10 to 70% and place next and a little on top of the other flower. Resize the butterfly to 30% and duplicate and place where you like them on your tag.  My tube came with some flowers and I resized them and place on the left bottom side of my frame.
Once happy with your tag, resize and then add your copyright and name and you are done. I angled my name and added a gradient glow to it.
Hope you have enjoyed doing my tut.

Sunday, March 18, 2012

Easter Egg Hunt FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac. You need a license to use this art work. Please do not use without a license. You can find this art at the Xeracx Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used Easter Egg Hunt and you can get it HERE
Here is the link to the kit HERE
Mask used by Rose and you can get it HERE 
Xero Filter-Porcelain and Improver 
Font used is Manualito Flo 
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image
Flood fill with white so you can see what you are working on.
Alway add your drop shadow as you go along.

Copy paper of choice and apply your mask, delete and merge group. You might have to resize to fit your frame.
Copy and paste frame 1 onto your new image, click inside with your magic wand and copy and paste paper of choice, I used #11, then invert and delete. Duplicate the frame twice, move both below the orginial frame. The frame between the original and the other copy apply the blend mode burn to that, you might want to lower the opacity if it is to dark for you, then rotate the 2 frames, go to Image,  free rotate to the right by 15%.
 Cope and paste your tube and resize if needed, I resized mine to 80% and place it on top of the frame and erase the body part under the arm only. Then add Xero filter-Porcelain at default settings to your tube and then add Xero filter-Improver, click landscape and then ok.
Resize the sign that says Easter Egg Hunt to 90% and move under the tube's arm. Resize the butterfly of choice to 25% and place on each side of the sign.  Take one of the ribbons and also resize to 25% and free rotate to the right at 90% and place under the arm of the tube and above the sign.
Now go to your bottom layer just above the mask and apply the glitter and ring spill in different places that you like the looks of. Then take one of the doodles and resize to 55% and place just above the glitter rings and then duplicate and mirror.
Now back to the  first frame layer, resize your bow to 75% and rotate to the left, 15%.  Resize bunny #2 to 60% and place to the right, like he is standing on the sign.
Then add your name, I applied a bevel to mine....setting are Shape2  width 7
0, 3, 00
315, 50, 30
Once happy with the look of your tag, close off the white background if you used one and merge visible and resize your tag.
Then add your copyright and all your other info to your tag and you are done.
Hope you enjoyed doing my tut
Hugs SharonC

Tuesday, March 6, 2012

Irish Beauty FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zlata_M.  You need a license to use this art work. Please do not use without a license. You can find this art at The PSP Project  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used is Dublin's Fair City and you can get it HERE
Look under 2011 in March for the kit.
Mask lrmask 134, click on St Patrick at the right 
 and you can get it HERE
Xero filter-Porcelain and Mistifier
Eye Candy 4000-Gradient Glow (optional)
Font used is Satisfaction
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image, fill with white so you can see what you are working on. Alway add your drop shadow as you go along, I will not keep repeating that part.
Paste paper #1 on the new image and resize to 85% and also the mask to 85% and apply to the paper, delete mask. Copy and paste element 13 and rotate to the right at 20%.
Copy and paste frame #1 and go to Adjust, free rotate, left checked and free to 20%.  Click inside with your magic wand, expand by 5, paste paper #2 and invert delete, select none,  move below your frame. Copy and paste element 15, mirror and place toward the bottom of the frame. You may have to adjust this once you have your tube placed on your tag.  Copy the frame again and place on top, click inside with your magic wand, expand by 5 and paste paper #1, invert, delete, nove below the frame.   Do not deselect yet, copy and paste your close up tube below the frame, then delete, and now select none. Duplicate the close up, go to Adjust, gaussian blur at 4, then Blend mode to overlay or what you prefer. Then on original tube apply Xero filter-Porcelain. Go back to copy and merge down, now apply Xero filter-Mistifier. 
Copy and mirror your tube and place to the right on the frame. Resize element 23 to 50% and place behind the frames, and move up on the right behind the tube's head.
My tube came with the hat and I placed it to the bottom left of the frame. If your does not have one,  the kit does have a hat to use. Resize element #8 to 40%, mirror and place behind the tube, like it is hanging from the frame.
I used the wordart and resize to 75% and place at the top left of the tag. Then I applied Eye Candy 4000 gradient glow, thin white first and then a thin light green and drop shadow.
I resized element #6 to 50% and place to the right just behind the tube.
Add any other elements that you would like.
Once happy with everything merge visible and resize first.
Then add your Copyright and name and you are done.
Thank you for giving my tut a try.
Hugs SharonC


Sunday, March 4, 2012

Music Music FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Cedric Poulat. You need a license to use this art work. Please do not use without a license. You can find his art at PTE HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used is Music Music and you can get it HERE
Xero filter-Porcelain and Mistifier
Font used is called Schneidler Blk BT it comes with PSP
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image, fill with white so you can see what you are working on. Alway add your drop shadow as you go along, I will not keep repeating that part. 
Copy and paste frame 2 onto your new layer. Take your magic wand and click inside and expand by 2 copy and paste paper of choice, I used #11. Then invert and delete. Do not deselect yet, copy and paste your close up and position then delete and select none, mirror your close up.  Now duplicate, gaussian blur at 3, blend mode overlay or what you prefer. On original tube apply xero-porcelain filter. Then back to the copy and merge down and drop shadow. Apply the xero filter, mistifier to this now. Copy and paste RB deco2 and place to the right behind the frame, duplicate, flip and mirror.  Copy and paste the RB boule and resize to 75% and move to the top left just above your white background layer. Be sure you are on the top layer now and copy and paste your tube and position to the left.  Resize RB disque 2 to 40% and take your pick and hold the shift key down and click on the little squares and pull out to the left some and then go to the right and push in some to get the record to look like it is angled. Will have to play with this a bit to get the look you would like and then place under the knee of your tube. Copy and paste Rb disque 3 and resize to 30% and place behind disque 2. Resize the microphone to 30% and place on top of the disques.  Resize the ipod to 45% and place to the right behind the disques. 
Take your freehand selection and draw around the black square on the ipod, copy and paste your tube, position, invert and delete, blend mode set to hard light or what you prefer.
Now copy and paste your RB starl and move to the bottom above the white layer and move to the right just a bit, so you can see a few of the stars. Resize the guitar to 75% and free rotate to the left by 10%, place behind the ipod.  Add any other elements that you would like. 
Then I added the RB sparkles just under the tube.
If happy with everything, close off your white background, and merge visible. Resize your tag at this time and then add your copyright and name and you are done. On my name I added a weave to it to match the music word on the frame. Take your magic wand and click inside each letter,  settings I used were, go to effects, texture effects, weave and white for both colors and the numbers set at this  1, 6, 1.
Thanks for giving my tut a try.
Hugs Sharonc

Friday, February 24, 2012

Garv Mellow Yellow FTU

Garv Yellow

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Keith Garvey. You need a license to use this art work. Please do not use without a license. You can find his art at PTE HERE

Supplies Needed

I used PSPX...but any of them should work.
Scrap kit used is Mellow Yellow by Shortie Scraps HERE
Xero filter-Radiance and Mistifier
Monti Blind Mask  HERE
Font used is called Before the Rain
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image, fill with white so you can see what you are working on.
Copy and paste paper of choice, I used paper #15, apply monti blind mask, delete and merge group. Copy and paste frame 8. Take your selection tool and draw around the top half and delete the part with the bow. Duplicate and flip and line up as one frame again, then merge down. Add your drop shadow V2 H2 50 5 with a color from the frame, I used #db9d2e. Take frame 6 and copy and paste and resize to 85% and place on top of the other frame you just made and use the same color for your drop shadow, merge the 2 frames.
Take your magic wand, click inside the frame and go to selections, modify, expand and expand by 2, copy paper of choice, I used #13,  invert and delete, do not deselect yet. Now add your close up below the frame and delete, now deselect.
Apply Xero filter-Radiance first then apply the Mistifier next.
Add your tube on top of frame and mirror and resize if needed.
Resize Cupcake 1 and duplicate, add drop shadow and position on the left side.  Resize element 7 the rose also to 30%, place in front of the cupcake. Resize Cupcake 2 to 25 to 30% and place by the rose. I took my Pick and rotate the rose a bit to my liking. Take element #2 the crown and resize to 40# and place behind the cupcakes, take your pick and rotate it to the left a little bit, then add your drop shadow. Place ribbon #2 behind the rose on the left and add your drop shadow. Then take one of the roses and resize and add on top of the bow on the frame. Add any other elements that you would like.
Resize tag and add your copyright and name now. I added a medium gradient glow to my name and then a drop shadow.

Hope you have enjoyed doing my tut.
Hugs SharonC

Thursday, February 23, 2012

Happy St Patty FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zlata M. You need a license to use this art work. Please do not use without a license.
You can find this art at The PSP Project HERE
Scrap kit used St Patrick by Fantasy Moments HERE
 Font I used was Celtic 
Supplies Needed
Mask WSL_Mask 84 and you can get that HERE

I used PSPX...but any of them should work.
Drop Shadow V2 H2 50 5
Xero Filter-Porcelain, Mistifier, Improver
EyeCandy 4000-Gradient glow and glass

Let's get started

Open a 700 x 700 image
Copy and paste paper of choice and apply Mask 84, delete and merge group. 
Resize element #77 to 85% and copy and paste onto your new image. Then copy and paste element #50 and resize to 87%, add your drop shadow. Take your magic wand and click inside your first frame, selections, modify, expand by 5, copy and paste paper #15, invert and  delete, do not deselect yet, add your close up tube and move to the right just a bit and delete, now select none.
Duplicate your close up, adjust, blur gaussian blur at 4, change the blend mode to what you like, I used overlay.
Then add xero filter, porcelain to the orginial closeup and merge down.
Then add xero Mistifier, then Improver click on landscape and then ok. Add your drop shadow.
Now add your tube on top of the frames and resize if needed, I resized mine to 85%, then mirror and place to the left .
Resize element 44 to 50% and place to the right of your tag. I added a little noise to the coins.
Resize element 26 to 50% move below the frames and paper and place at the bottom under her shoes, duplicate, flip and place behind the tubes head....duplicate and move up about half way behind her back, duplicate, mirror and position behind the pot of gold.
Resize the ribbon element #10 to 50% and place at the bottom behind the tube and pot of gold . Then I duplicated it a couple of times flip and just played around until I liked the look of where they were, just showing the tip of it in different areas...
Be creative and let your own style come thru on this part...
Now go to your preset and Ellipse and draw out a circle around the frame. add a new raster layer and then click your text, move your arrow over the circle until you get an arch with the a, then type out what you would like to say...I said Happy St Patty and used the font Celtic. Once happy with the wording, covert to raster layer and delete the vector circle and add Eye Candy 4000 glass with these settings..bevel width 30, smoothness 75, then the others 30, 35, 50, 0, 50 and then add Eye Candy 4000 gradient glow, fat setting at 3, 25, 100, then your drop shadow.
Now resize your tag and add your copyright and name...add the Eye Candy glass and gradient glow to your name also....you are done
Hope you have enjoyed doing my tut
Hugs SharonC

Tuesday, January 24, 2012

Tag Show Off from a Tut

Mavy Love hurt tut

The artist I used is Lady Mishka at Pics For Design. You need a license to use this art, please do not use without a license.  You can get it at PFD HERE

Here is a tag I made from an awesome tut by Tragedy Creationz and you can find her tut HERE