Tuesday, April 17, 2012

HoneyBee-PTU




This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Gina King.
You need a license to use this art work. Please do not use without a license.
You can find this art at PTE HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap kit HoneyBee-Add On
from Raspberry Road Designs and you can get it HERE
I got it when it was offered for a freebie for a short time,
 it is now PTU but well worth it...love it.
Xero Filter-Radiance and Porcelain
WSL_Mask255 , get it HERE

Font is diesel_rudolf  
Drop Shadow usually V2 H2 50 5

Let's get started
Remember to add your drop shadow as you go along.
Open a 700 x 700 new image, copy paper #5 and apply your mask, delete and merge group. You might have to enlarge your mask later.
Copy and paste and resize frame 20 to 35%.
The papers are large so you will want to resize them.
Click inside the frame with your magic wand, and expand by 3, paste paper of choice, I used #1, invert and delete, move below your frame. Then I used paper #2 and changed the blend mode to Hard Light.
Resize element 14 to 20% and place at top behind frame, duplicate and move over some, erase any parts sticking out from the frame.
Resize element #36 to 25% and rotate 90% to left or right and place behind the paper layers on one side or the other and then duplicate and mirror.
Copy and paste your close up and be sure it is below the frame layer, duplicate, go to Adjust, guassian blur at 4, change the blend mode to overlay or one that you prefer using.
On the original, xero filter, porcelain, then back to copy, merge down and apply the xero filter mistifier and I also added the soft vingette (optional).
Resize element 35 to 45% and place at the lower left of the frame.
Resize flower element #32 to 30% and place at lower left corner of tag, on top of element 35. Duplicate and resize to 75% and place to the right of the other flower, then duplicate again and move up and to the left a bit. Resize element 31 to 20% and rotate 42% to the left and place behind the flowers toward the top and then duplicate, flip and mirror and position behind the flower on the lower part.
Resize elements 10 to 25% and element 11 to 30%  and place at the upper right corner of your frame, take your pick tool and angle one of them just a bit. Bow 29, resize to 30% and place on top of the wordart tags. Resize the bee to 15% and place around the flowers, duplicate a couple of time and move them around to your liking.
Copy and paste your tube on top of the flowers on the left side of the tag. Resize element 13 to 15% and place on top of the tube to cover a bit...
 I also took this element and placed it above the mask layer and duplicated and placed in different places.
I then resized the bear to 15% and placed on the right of the frame for a little whimsical look.
Once happy with everything, merge visible and resize your tag.
Add your copyright and name and you are done.
Thanks for giving my tut a try.



Monday, April 16, 2012

Gothic Love FTU





This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.
Xero Filter-Radiance and Mistifier
WSL_Mask 255, get it HERE
Scrap kit used by Dreamland Designs
called Soft Side of Goth and you can get it HERE

Font is PR Celtic 
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 new image, can resize later
Resize papers # 8 and 15.
Apply the mask to #15 first, delete and merge group,  then apply it to paper 8 and resize to 90%. Copy and paste frame #2 on top of the masks.
Remember to add your drop shadow as you go along. 
Copy the branch and place behind the frame on one side, then duplicate and mirror for the other side, merge down, then go to Adjust and sharpen.
 Take your magic wand and click inside the frame, go to selections, modify, expand by 2 and add your half tube and then delete, select none. 
Change the blend mode to Luminance(L) and lower the opacity to 90 and add the xero filter, Radiance and then mistifier to the tube.
Resize element bow 4 to 15% and place at the top left of your frame, then duplicate and mirror. Resize the twig to 15% and place at the bottom of your frame, duplicate, flip, mirror and position at the top of your frame.
Resize coffin to 60% and rotate to the right 25% and place to the right of your tag. Resize the candle to 50% and then duplicate and resize to 75% and place to your liking on the right side above the coffin. Take the statue and resize that to 17% and place in front of the candles. Resize the clock to 10% and free rotate to the left 15% and place about in the center and move to the left a bit, refer to my tag for placement. 
Resize the choker to 50% and place behind the bigger candle and statue.
Resize the Raven to 15 % and place at the top of the tag, sitting it on the twig.
Now copy and paste your tube and move to the left of the tag some.
Add some wording if you would like.
Once happy, merge visible and resize your tag.
Then add your copyright and name and that is it.
Thanks for giving my tut a try.

Tuesday, April 10, 2012

Sea Life Forum Set FTU





This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Victoria Fox. You need a license to use this art work. Please do not use without a license. You can find this art at PTE HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used is Beneath The Sea and you can get it HERE
Font  is called Shark in the Water
Drop Shadow usually V2 H2 50 5

I did an Animated and non animated one, plus 2 different Avators
Open a 600 x250 image, copy paper of choice, I used #69, resize to 75% and position to your liking.  Tube I resized to 80% and placed in the center of the tag....I placed the tube first so it would be easier to decide where to place the elements...
This tut is one that you play around with and decide which elements that you like to use.
 I will tell the ones I used and sizes, but let your creativity flow on this. Remember to add your drop shadow as you go along.

Take element #59 and paste onto the new image and place to the right of the tag and then duplicate and mirror and position on the left side.  Resize element #10 to 25% and duplicate it 3 more times and place at the bottom of your tag in different locations, behind the tube layer.  Then take elements, 17,  21, 40, 44, and 45 and resize to your liking, I resize most to about 10 to 15% and placed in different parts of the tag. The fish I placed behind the greenery and made it look like they were coming from behind there. Place element #40, the colorful snail,  on the growth that you placed on the bottom of the tag.
Place element #15 behind the tube and growth on the bottom.
Now resize the anchor and treasure chest and place the anchor on one side and the chest on the other side just under the growth.  Then I took the bubbles element #23, resized to 50% and duplicated 4 times and placed in different areas, then once happy I merged these layer down until they were all on one layer. Then move the bubbles down below all the elements you added. For the frame, select all, new raster layer, fill with color of choice, modify by 3 and hit the delete key on your keyboard. Add some noise to the frame. Add a gradient glow or a drop shadow.
 Add your copyright and url and name and you are done if you do not want to animate, merge visible. Do not merge if animating.
Explaining animation is not my best but will try.
To animate, I moved the bubbles down low, then copy merge to animation shop. Then came back to psp and move the bubbles up a little bit and take back to animation shop and paste after current frame. Go back and move bubbles up again and back to animation. I had a total of 6 frames for my bubble animation. I changed the frame properties to 15.  Test your animation and if happy save and you are done.
Now for the Avator
I did it 2 ways, could not decide which I liked best...lol
Open an image 150 x 150
Copy and paste merged image, resize to 85% if using just the treasure chest and background area, merge visible. If using the tube part, then resize to 80%.  Select all, new raster layer, fill with color of choice, modify by 3, hit the delete on your keyboard. Add a gradient glow if you like or just a drop shadow, add some noise to the frame also.
Add your copyright and all and you are done.
Hope you have enjoyed doing my tut



Animated look




Tuesday, April 3, 2012

Sweet Babe Forum Set FTU




This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Arthur Crowe. You need a license to use this art work. Please do not use without a license. You can find this art at the Arthur Crowe Factory Store HERE

Supplies Needed
I used PSPX...but any of them should work.
Forum Mask #17 and you can get it HERE
Filter-Xero-Radiance, Porcelain, Mistifier, Soft Vignette & Sparkles

Font used, Impact for Sweet Babe, it comes with PSP
Font for name is  Before the Rain
Drop Shadow usually V2 H2 50 5
Alway add your drop shadow as you go along.


Open a 600 x 250 image
Flood fill with a darker color from your tube, then add a new Raster Layer and fill with a lighter color from your tube. Apply the mask then delete, merge group. Add your drop shadow, so your mask will show up. I then applied the filter xero-Soft Vignette to the mask. I then added the xero filter-Sparkles to the mask also...with the following settings
Fleck_1
Uniform
100, 1000, 25, 10
Use Highlight and Anti-Alias checked
then click ok and then go to Adjust and sharpen

My tube comes with a close up, half and full body. Copy and paste your half tube and then duplicate it 3 more times, position in different parts of your image, mirror one and place the face part on the left and right side, merge tubes down until all on one layer.  Now duplicate this layer and apply the blend mode, Burn.  Then on the original, apply the xero filters, Radiance, Porcelain and mistifier all at default settings, then back to the copy and merge down and move below the mask layer. Lower the opacity to 40 to 50 depending on how light you want it to be.
Now type out the words Sweet Babe with one of the colors you used before, with  the font Impact at size 125, then change blend mode to soft light and move it up toward the top of your tag, on top of  the mask, add your drop shadow. I also applied Effect, 3D effect, cutout at V-1, H1, opacity 21 and blur 5, shadow black and fill interior same color that you used for the word. Add your drop shadow
Then copy and paste your tube on top of all layers and place in the center of your tag,  add your drop shadow.

If happy with everything, then merge layers visible.

For the frame part, select all, new raster layer, fill with the darker color, Modify, contract by 2, delete, add new raster layer, fill with lighter color, contract by 3 delete.
Go to Adjust, add noise at 50% on your second layer of the frame, the lighter color, uniform and Monochrome checked.

Now for the Avator, open a 150 x 150 new image.
Copy merge from the sig tag and paste, resize to 85% and mirror, position to your liking, then merge visible, sharpen. For the frame, select all, new layer, add dark color, contract by 2, delete, new layer, fill with lighter color, contract by 3, delete. Add your noise to this layer as before.
Once happy with everything, merge visible and add all copyrights and your name and you are done.
Hope you have enjoyed doing my tut.





Tuesday, March 27, 2012

Summer Love FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Jennifer Janesko. You need a license to use this art work. Please do not use without a license. My license is from CILM, but they are closed now.
You can find this art at CDO HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used Memories of the Past by Stu and you can get it HERE
It is listed under Blog Trains, Jan 2012
Mask used DBV 133 and you can get it HERE
Xero Filter-Porcelain
Font used is Before the Rain 
Drop Shadow usually V2 H2 50 5

Let's get started
Open a 700 x 700 new image
Remember to add your drop shadow as you go along.
Copy paper #5 and apply your mask, delete and merge group.
Resize the frame element #5 to 75% and paste on top of the mask.  Take your magic wand, click inside and expand by 3 copy and paste paper #1, invert and delete, move below your frame. Do not delete yet, copy your tube of choice and position below the frame and then hit the delete on your keyboard, now deselect.  Duplicate your tube and apply gaussian blur at 4, blend mode overlay or soft light, which ever you prefer. Then on the original apply the xero filter-porcelain. Merge your tubes.
Resize element 3 to 55% and place behind the paper of the frame and rotate to the left 25% and place at the upper left part of the frame. Resize element #6 to 42% and place on the left side of frame, then duplicate flip and mirror. You will need to do a little adjusting to get it into place like you want it.
Take element #7, resize to 70% and place at the upper right behind the frame, then duplicate, flip, mirror and position. Resize element #10 to 70% and place next and a little on top of the other flower. Resize the butterfly to 30% and duplicate and place where you like them on your tag.  My tube came with some flowers and I resized them and place on the left bottom side of my frame.
Once happy with your tag, resize and then add your copyright and name and you are done. I angled my name and added a gradient glow to it.
Hope you have enjoyed doing my tut.

Sunday, March 18, 2012

Easter Egg Hunt FTU



This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac. You need a license to use this art work. Please do not use without a license. You can find this art at the Xeracx Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used Easter Egg Hunt and you can get it HERE
Here is the link to the kit HERE
Mask used by Rose and you can get it HERE 
Xero Filter-Porcelain and Improver 
Font used is Manualito Flo 
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image
Flood fill with white so you can see what you are working on.
Alway add your drop shadow as you go along.

Copy paper of choice and apply your mask, delete and merge group. You might have to resize to fit your frame.
Copy and paste frame 1 onto your new image, click inside with your magic wand and copy and paste paper of choice, I used #11, then invert and delete. Duplicate the frame twice, move both below the orginial frame. The frame between the original and the other copy apply the blend mode burn to that, you might want to lower the opacity if it is to dark for you, then rotate the 2 frames, go to Image,  free rotate to the right by 15%.
 Cope and paste your tube and resize if needed, I resized mine to 80% and place it on top of the frame and erase the body part under the arm only. Then add Xero filter-Porcelain at default settings to your tube and then add Xero filter-Improver, click landscape and then ok.
Resize the sign that says Easter Egg Hunt to 90% and move under the tube's arm. Resize the butterfly of choice to 25% and place on each side of the sign.  Take one of the ribbons and also resize to 25% and free rotate to the right at 90% and place under the arm of the tube and above the sign.
Now go to your bottom layer just above the mask and apply the glitter and ring spill in different places that you like the looks of. Then take one of the doodles and resize to 55% and place just above the glitter rings and then duplicate and mirror.
Now back to the  first frame layer, resize your bow to 75% and rotate to the left, 15%.  Resize bunny #2 to 60% and place to the right, like he is standing on the sign.
Then add your name, I applied a bevel to mine....setting are Shape2  width 7
0, 3, 00
315, 50, 30
Once happy with the look of your tag, close off the white background if you used one and merge visible and resize your tag.
Then add your copyright and all your other info to your tag and you are done.
Hope you enjoyed doing my tut
Hugs SharonC

Tuesday, March 6, 2012

Irish Beauty FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Zlata_M.  You need a license to use this art work. Please do not use without a license. You can find this art at The PSP Project  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used is Dublin's Fair City and you can get it HERE
Look under 2011 in March for the kit.
Mask lrmask 134, click on St Patrick at the right 
 and you can get it HERE
Xero filter-Porcelain and Mistifier
Eye Candy 4000-Gradient Glow (optional)
Font used is Satisfaction
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 image, fill with white so you can see what you are working on. Alway add your drop shadow as you go along, I will not keep repeating that part.
Paste paper #1 on the new image and resize to 85% and also the mask to 85% and apply to the paper, delete mask. Copy and paste element 13 and rotate to the right at 20%.
Copy and paste frame #1 and go to Adjust, free rotate, left checked and free to 20%.  Click inside with your magic wand, expand by 5, paste paper #2 and invert delete, select none,  move below your frame. Copy and paste element 15, mirror and place toward the bottom of the frame. You may have to adjust this once you have your tube placed on your tag.  Copy the frame again and place on top, click inside with your magic wand, expand by 5 and paste paper #1, invert, delete, nove below the frame.   Do not deselect yet, copy and paste your close up tube below the frame, then delete, and now select none. Duplicate the close up, go to Adjust, gaussian blur at 4, then Blend mode to overlay or what you prefer. Then on original tube apply Xero filter-Porcelain. Go back to copy and merge down, now apply Xero filter-Mistifier. 
Copy and mirror your tube and place to the right on the frame. Resize element 23 to 50% and place behind the frames, and move up on the right behind the tube's head.
My tube came with the hat and I placed it to the bottom left of the frame. If your does not have one,  the kit does have a hat to use. Resize element #8 to 40%, mirror and place behind the tube, like it is hanging from the frame.
I used the wordart and resize to 75% and place at the top left of the tag. Then I applied Eye Candy 4000 gradient glow, thin white first and then a thin light green and drop shadow.
I resized element #6 to 50% and place to the right just behind the tube.
Add any other elements that you would like.
Once happy with everything merge visible and resize first.
Then add your Copyright and name and you are done.
Thank you for giving my tut a try.
Hugs SharonC