Friday, April 27, 2012

Howdy Partner FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Gary Ham. You need a license to use this art work.
Please do not use without a license.
You can find his art at CDO HERE

Supplies Needed
Cluster Frame called Green Acres from RaspberryRoad HERE
Font IFC Lost Banditos
Mask WSL_Mask84, get that HERE
xero filter- Soft Mood and Fritillary
I used PSPX...but any of them should work.
Drop Shadow V2 H2 40 5
Remember to add your drop shadow as you go along.

This is an easy one but thought it was cute...lol
Open a 700 x 700 new image, can resize later.
Fill with a color
of choice, I used #c01a1e, apply your mask,
delete and merge group.
 Add a new raster layer and fill with #f1cd8f,
apply the mask again and resize it to 90%,
move off to the right a bit.
I applied a texture setting to both my masks.
Settings-Texture-Hatch Fine, 50%, depth at 1,
315 angle, intensity 50 and elevation 30, color white.

Resize the frame to 22% and paste on to your new image.
Take your magic wand and click inside frame, you will have to
click a few times because of the shadow on the frame.
Then go to selection, modify, expand by 5,
add a new raster layer, fill with color or choice.
I used #f1cd8f, move below your frame. I added the xero filter-
fritillary, variation at 15, all else at default settings.
Add your tube, if using the same one I am,
resize to 85%, mirror, move below the frame,
duplicate and move this one above the frame.
Erase any part over the frame.
Add the xero filter-Soft Mood to both tubes.
Add any wording you would like and your name.
I applied an inner bevel, with these settings

width 17,
28, 5, -30, 43
130 angle, 50, 30
color white.

Once happy with everything, merge visible and add your copyright.
Hope you have enjoyed doing my tut.
Thanks for giving them a try.







Monday, April 23, 2012

Vintage Style 3 Tag Set FTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Screaming Demons. You need a license to use this art work. Please do not use without a license. You can find this art at SATC  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap by A Taggers Scrap, Vintage Girl Add-On, get it HERE
WSL_Mask #84 HERE
Filter-Xero-Emphasis and Mistifier
L en K's Pia, get it HERE
AAA Frames and can get the Foto Frame HERE
Font used,
Font is volutes
Drop Shadow usually V2 H2 50 5
Alway add your drop shadow as you go along.

Let's get started
Open a 700 x 700 new image
Copy paper #34 and apply your mask, delete and merge group.
Copy and paste frame 13, free rotate to the right 15% and add xero filter-Porcelain.
Click inside your frame with your magic wand, expand by 3,
paste paper #27, invert and delete. Do not deselect yet.
Copy and paste your close up tube, hit the delete key on your keyboard, deselect.
Duplicate your close up tube, gaussian blur 4, change the
blend mode to overlay, or one you like to use.
On the original close up apply the
xero filter-Emphasis, then back to copy and merge down.
Now add xero filter-Mistifier.
I then took element #3, the leaves and resized to 50%
and places on the frame in different locations and erased any
parts that were showing outside the frame area.
Copy the sparkles and resize to 75%.
Resize bow #2 to 70% and place at top of frame.

These are the elements I used, you made decide
to use different ones.

Copy the underthings and place on the right side of the frame,
refer to my tag for placement.
Copy and paste the stool and place to the right on frame,
now copy your sit down tube and place on the stool.
Resize the beads to 60% and place more to the left of the frame, below your tube layer.
Copy the fan, mirror and place to the left of frame. You  may need to erase a little bit of the stem.
Resize the shoe to 75% and mirror and place on the left side and duplicate and position into place.
Take flower #6 and place to the right and move down below the stool and duplicate and move over and up a little bit.

Take the purse and paste behind the beads.
Then take flower #11 and resize and place to your liking in different areas.
Resize bow#2 to 50% and place on the purse just below the clasp.
I took the letter and placed it to the left of the frame, just
above the mask layer.
Once happy with everything, then add
your copyright and name.
Hope you have enjoying trying my tut.

I decide to add a Forum Set to go along with this tag also.



I decide to add a Forum Set to go along with this tag also.
Open a 600 x 250 new image. 
Copy and paste  paper #27 to the new image.
Apply the Filter L en K's Pia 
Copy your tag and add the filter mura meister copies, wallpaper, rotate at default setting.
Copy your tag again on top of that and move to the left
until the letter part touches the edge.
Merge visible and add the AAA-Foto Frame filter
width at 5, all else at default setting.
Add your copyright and name. Same font as for tag.
Avator
Open a new image 150 x 150
Copy and paste your tag and resize to 85%, place
how you want it to look. Be sure to sharpen it.
I place the face from the frame part to show on mine.
Merge visible and add the AAA Foto frame to this also.
Add your copyright and initial or name.
That's it, all done.




Gangster Babe FTU





This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Gina King.
You need a license to use this art work. Please do not use without a license.
You can find this art at PTE HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap kit 
Public Enemy Number One
by Peachy Keen Designs and you can get it HERE  
DBV_Mask133 , get it HERE
Eye Candy 4000-Gradient Glow
Font is Mr Lackboughs 
Drop Shadow usually V2 H2 50 5

Let's get started
Remember to add your drop shadow as you go along.
Open a 700 x 700 new image
Copy paper #5 and add your mask, then delete and merge group.
Take your free hand selection and draw around the frame and copy and paste onto your new image. Rotate to the left 90% and then mirror. 
I use my Selection tool and drew a rectangle around the frame, then copy paper #5 or one of your choosing, invert and delete.
Be sure to move it below your frame.

Now copy your Tube and resize if needed and move below the frame,
duplicate it and move that one above the frame,
erase any excess showing on the frame.

Resize the wordart, Ok Boys, Let's Go Make a WITHDRAWL to 60%
and place toward the top on the right hand side of the tag.
I then added Eye Candy 4000, fat gradient glow at
3, 25, 100, color white.
Copy the bullets and duplicate and on one free rotate to the left 15% and leaning on the other bullet.
 Resize the hat to 70% and rotate about 15 to 20% and place just behind your first tube
 at the top left of the frame like it is hanging on the frame. Take the money sign with the diamonds in it
and paste on the right side of the frame, duplicate it and resize to 75% and rotate to the left, 15%
and place on the bow, be sure to sharpen.
Copy and paste the car now and have the bumper behind the bullet a bit.
I then took the wordart again and place just above the mask frame and placed it in different places so the $ would show and erased any wordart that showed behind the frame.
Once happy with everything, merge visible and resize.
Now add your copyright and name and you are done.
I added the gradient glow to the name also.
Hope you have enjoyed doing my tut...

Tuesday, April 17, 2012

HoneyBee-PTU




This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Gina King.
You need a license to use this art work. Please do not use without a license.
You can find this art at PTE HERE

Supplies Needed

I used PSPX...but any of them should work.

Scrap kit HoneyBee-Add On
from Raspberry Road Designs and you can get it HERE
I got it when it was offered for a freebie for a short time,
 it is now PTU but well worth it...love it.
Xero Filter-Radiance and Porcelain
WSL_Mask255 , get it HERE

Font is diesel_rudolf  
Drop Shadow usually V2 H2 50 5

Let's get started
Remember to add your drop shadow as you go along.
Open a 700 x 700 new image, copy paper #5 and apply your mask, delete and merge group. You might have to enlarge your mask later.
Copy and paste and resize frame 20 to 35%.
The papers are large so you will want to resize them.
Click inside the frame with your magic wand, and expand by 3, paste paper of choice, I used #1, invert and delete, move below your frame. Then I used paper #2 and changed the blend mode to Hard Light.
Resize element 14 to 20% and place at top behind frame, duplicate and move over some, erase any parts sticking out from the frame.
Resize element #36 to 25% and rotate 90% to left or right and place behind the paper layers on one side or the other and then duplicate and mirror.
Copy and paste your close up and be sure it is below the frame layer, duplicate, go to Adjust, guassian blur at 4, change the blend mode to overlay or one that you prefer using.
On the original, xero filter, porcelain, then back to copy, merge down and apply the xero filter mistifier and I also added the soft vingette (optional).
Resize element 35 to 45% and place at the lower left of the frame.
Resize flower element #32 to 30% and place at lower left corner of tag, on top of element 35. Duplicate and resize to 75% and place to the right of the other flower, then duplicate again and move up and to the left a bit. Resize element 31 to 20% and rotate 42% to the left and place behind the flowers toward the top and then duplicate, flip and mirror and position behind the flower on the lower part.
Resize elements 10 to 25% and element 11 to 30%  and place at the upper right corner of your frame, take your pick tool and angle one of them just a bit. Bow 29, resize to 30% and place on top of the wordart tags. Resize the bee to 15% and place around the flowers, duplicate a couple of time and move them around to your liking.
Copy and paste your tube on top of the flowers on the left side of the tag. Resize element 13 to 15% and place on top of the tube to cover a bit...
 I also took this element and placed it above the mask layer and duplicated and placed in different places.
I then resized the bear to 15% and placed on the right of the frame for a little whimsical look.
Once happy with everything, merge visible and resize your tag.
Add your copyright and name and you are done.
Thanks for giving my tut a try.



Monday, April 16, 2012

Gothic Love FTU





This tut was written for those with a basic knowledge of psp.

I am using the awesome artwork of Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed

I used PSPX...but any of them should work.
Xero Filter-Radiance and Mistifier
WSL_Mask 255, get it HERE
Scrap kit used by Dreamland Designs
called Soft Side of Goth and you can get it HERE

Font is PR Celtic 
Drop Shadow usually V2 H2 50 5

Open a 700 x 700 new image, can resize later
Resize papers # 8 and 15.
Apply the mask to #15 first, delete and merge group,  then apply it to paper 8 and resize to 90%. Copy and paste frame #2 on top of the masks.
Remember to add your drop shadow as you go along. 
Copy the branch and place behind the frame on one side, then duplicate and mirror for the other side, merge down, then go to Adjust and sharpen.
 Take your magic wand and click inside the frame, go to selections, modify, expand by 2 and add your half tube and then delete, select none. 
Change the blend mode to Luminance(L) and lower the opacity to 90 and add the xero filter, Radiance and then mistifier to the tube.
Resize element bow 4 to 15% and place at the top left of your frame, then duplicate and mirror. Resize the twig to 15% and place at the bottom of your frame, duplicate, flip, mirror and position at the top of your frame.
Resize coffin to 60% and rotate to the right 25% and place to the right of your tag. Resize the candle to 50% and then duplicate and resize to 75% and place to your liking on the right side above the coffin. Take the statue and resize that to 17% and place in front of the candles. Resize the clock to 10% and free rotate to the left 15% and place about in the center and move to the left a bit, refer to my tag for placement. 
Resize the choker to 50% and place behind the bigger candle and statue.
Resize the Raven to 15 % and place at the top of the tag, sitting it on the twig.
Now copy and paste your tube and move to the left of the tag some.
Add some wording if you would like.
Once happy, merge visible and resize your tag.
Then add your copyright and name and that is it.
Thanks for giving my tut a try.

Tuesday, April 10, 2012

Sea Life Forum Set FTU





This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Victoria Fox. You need a license to use this art work. Please do not use without a license. You can find this art at PTE HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap kit used is Beneath The Sea and you can get it HERE
Font  is called Shark in the Water
Drop Shadow usually V2 H2 50 5

I did an Animated and non animated one, plus 2 different Avators
Open a 600 x250 image, copy paper of choice, I used #69, resize to 75% and position to your liking.  Tube I resized to 80% and placed in the center of the tag....I placed the tube first so it would be easier to decide where to place the elements...
This tut is one that you play around with and decide which elements that you like to use.
 I will tell the ones I used and sizes, but let your creativity flow on this. Remember to add your drop shadow as you go along.

Take element #59 and paste onto the new image and place to the right of the tag and then duplicate and mirror and position on the left side.  Resize element #10 to 25% and duplicate it 3 more times and place at the bottom of your tag in different locations, behind the tube layer.  Then take elements, 17,  21, 40, 44, and 45 and resize to your liking, I resize most to about 10 to 15% and placed in different parts of the tag. The fish I placed behind the greenery and made it look like they were coming from behind there. Place element #40, the colorful snail,  on the growth that you placed on the bottom of the tag.
Place element #15 behind the tube and growth on the bottom.
Now resize the anchor and treasure chest and place the anchor on one side and the chest on the other side just under the growth.  Then I took the bubbles element #23, resized to 50% and duplicated 4 times and placed in different areas, then once happy I merged these layer down until they were all on one layer. Then move the bubbles down below all the elements you added. For the frame, select all, new raster layer, fill with color of choice, modify by 3 and hit the delete key on your keyboard. Add some noise to the frame. Add a gradient glow or a drop shadow.
 Add your copyright and url and name and you are done if you do not want to animate, merge visible. Do not merge if animating.
Explaining animation is not my best but will try.
To animate, I moved the bubbles down low, then copy merge to animation shop. Then came back to psp and move the bubbles up a little bit and take back to animation shop and paste after current frame. Go back and move bubbles up again and back to animation. I had a total of 6 frames for my bubble animation. I changed the frame properties to 15.  Test your animation and if happy save and you are done.
Now for the Avator
I did it 2 ways, could not decide which I liked best...lol
Open an image 150 x 150
Copy and paste merged image, resize to 85% if using just the treasure chest and background area, merge visible. If using the tube part, then resize to 80%.  Select all, new raster layer, fill with color of choice, modify by 3, hit the delete on your keyboard. Add a gradient glow if you like or just a drop shadow, add some noise to the frame also.
Add your copyright and all and you are done.
Hope you have enjoyed doing my tut



Animated look




Tuesday, April 3, 2012

Sweet Babe Forum Set FTU




This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Arthur Crowe. You need a license to use this art work. Please do not use without a license. You can find this art at the Arthur Crowe Factory Store HERE

Supplies Needed
I used PSPX...but any of them should work.
Forum Mask #17 and you can get it HERE
Filter-Xero-Radiance, Porcelain, Mistifier, Soft Vignette & Sparkles

Font used, Impact for Sweet Babe, it comes with PSP
Font for name is  Before the Rain
Drop Shadow usually V2 H2 50 5
Alway add your drop shadow as you go along.


Open a 600 x 250 image
Flood fill with a darker color from your tube, then add a new Raster Layer and fill with a lighter color from your tube. Apply the mask then delete, merge group. Add your drop shadow, so your mask will show up. I then applied the filter xero-Soft Vignette to the mask. I then added the xero filter-Sparkles to the mask also...with the following settings
Fleck_1
Uniform
100, 1000, 25, 10
Use Highlight and Anti-Alias checked
then click ok and then go to Adjust and sharpen

My tube comes with a close up, half and full body. Copy and paste your half tube and then duplicate it 3 more times, position in different parts of your image, mirror one and place the face part on the left and right side, merge tubes down until all on one layer.  Now duplicate this layer and apply the blend mode, Burn.  Then on the original, apply the xero filters, Radiance, Porcelain and mistifier all at default settings, then back to the copy and merge down and move below the mask layer. Lower the opacity to 40 to 50 depending on how light you want it to be.
Now type out the words Sweet Babe with one of the colors you used before, with  the font Impact at size 125, then change blend mode to soft light and move it up toward the top of your tag, on top of  the mask, add your drop shadow. I also applied Effect, 3D effect, cutout at V-1, H1, opacity 21 and blur 5, shadow black and fill interior same color that you used for the word. Add your drop shadow
Then copy and paste your tube on top of all layers and place in the center of your tag,  add your drop shadow.

If happy with everything, then merge layers visible.

For the frame part, select all, new raster layer, fill with the darker color, Modify, contract by 2, delete, add new raster layer, fill with lighter color, contract by 3 delete.
Go to Adjust, add noise at 50% on your second layer of the frame, the lighter color, uniform and Monochrome checked.

Now for the Avator, open a 150 x 150 new image.
Copy merge from the sig tag and paste, resize to 85% and mirror, position to your liking, then merge visible, sharpen. For the frame, select all, new layer, add dark color, contract by 2, delete, new layer, fill with lighter color, contract by 3, delete. Add your noise to this layer as before.
Once happy with everything, merge visible and add all copyrights and your name and you are done.
Hope you have enjoyed doing my tut.