Sunday, June 7, 2015

White Pine Bay PTU



 

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Di_Halim. 
 
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Kit White Pine Bay By BLT DeZignZ  get it at PFD  HERE
This kit contains:
- 20 papers
- 71 elements

 RR Mask 2_1  HERE
Filter
Mura Meister Copies-Glob
Font of Choice, I used Cardinal

Drop shadow is usually V-2 H-2 Black, 50, 7
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Resize paper 8 to 22%, paste, apply your mask, delete and merge group.

Resize frame 3 to 45%, paste, click inside with your magic wand, expand by 5,
paste paper 8, invert, delete, move below frame.

Resize the house to 23%, paste below the frame in the center.
Resize the tree to 30%, place one behind the house in the center, duplicate, move over to the right more, duplicate again and move above the frame layer on the left.
Resize the web to 10%, place on the house where you like, duplicate and
place again.

Resize the car to 8%, paste toward the left, then take your Pick tool and push in a bit and raise it up a bit.

Resize the gas pumps to 10%, paste on the right side above the frame layer.

Resize the bench to 7%, place below the car layer on the right more.

Resize the 66 sign to 13%, paste below the gas pumps and move up some.
Resize the lights to 10%, paste on the sign.

Resize sign 2 to 6%, paste on the left below the tree, free rotate to the left at 15.

Paste the rock, resize to 15%, place below the car layer on the left, duplicate, move over a bit, duplicate, mirror,
duplicate again, resize to 45%, place in front of the bench leg, duplicate,
move over a bit. Duplicate as many times as you like and place.

Resize leaf 3 to 3%, apply Mura Meister Copies-Glob, change the first number 
 to 55, paste below the gas pump layer, place how you like and then
erase the parts you do not want, duplicate a few more times and move around
like you like them.

Resize the dog to 5%, place on the bench.
Paste your tube, resize as needed.

Resize the cloud to 15%, paste on the paper layer in the frame, move up, duplicate, move over some.

Resize the knife to 4%, place on the right of your tube.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
 
That's it
Hope you enjoyed doing my tut.

Saturday, May 23, 2015

Happy Father's Day PTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Verymany. 
 
You need a license to use this art work. Please do not use without a license.
 You can find this art at Verymany Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Kit Thanks Dad By BLT DeZignZ   get it  HERE 
Xero Filter-Soft Mood, Clarity
penta.com-jeans
 RR Mask 2_1  HERE
Font of Choice, I used Kirsty

Drop shadow is usually V-2 H-2 Black, 50, 7
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Paste paper 10, apply your mask, delete and merge group.

Paste frame 2, resize to 65%, free rotate to the left at 90, click inside
with your magic wand, expand by 5, paste paper 15, invert delete, move below the frame,  then mirror your tube and paste in the frame, delete, select none.

Change the blend mode to Luminance (L) and apply the
Xero filter, Soft Mood first, then Clarity, merge down with the paper layer,
then apply penta.com filter-jeans with these settings
amount 20,  border width 5

Paste frame 3, resize to 90%, free rotate to 90 left, move below frame 2, take your Pick tool and
pull the frame to how you want it behind the top frame, then erase the loop
part on the side.

Paste frame 2, free rotate to the left at 90, resize to 75%, move below
frame 3 and again use your Pick tool to adjust how you want it.

Resize your tube to 60%, place on your frame.

Resize the table to 35%, place behind your tube on the right.

Resize the phone to 15%, place on the table.

Resize the clock to 15%, place on the table next to the phone.

Resize the toy plane to 10%, place on the table

Resize the pups to 45%, place on the right in front of your tube layer.

Resize the books to 35%, paste on the left below the tube layer.

Resize the chess board to 30%, place in the center at the bottom of the frame.

Resize the bottle to 20%, place on the left by the books.

Resize ribbon 2 to 50%, paste just above the frame on the right, duplicate,
mirror and move below the paper layer of the frame on the left.

Resize the model car box to 20%, paste on the right side below the tube layer.

Resize the string to 60%, free rotate to the left at 5, place on the frame at the top,
below the tube layer, erase any of the strings you do not want.

Resize the baseball glove, paste on the right below the car racing box.

Resize the Easel to 50%, paste on the left just above the frame layer, click
with your magic wand, resize your tube to 35%, and paste on the easel, invert, delete,
select none, change the blend mode to Luminance (L) and lower
the opacity to around 60 or what you like.

Resize the foliage to 55%, free rotate to the left,  paste below the easel on the left, duplicate, mirror.

Resize the stars to 35%, erase all but one and place on the frame, duplicate and move over some.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Saturday, May 9, 2015

Happy Mother's Day PTU


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Lysisange. 
 
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Kit Bundle of Joy By BLT DeZignZ 
and you can get it  HERE  or HERE
Filter
Mura Meister Copies-Encircle
 RR Mask 2_1  HERE
Font of Choice, I used Brotherhood Script

Drop shadow is usually V-2 H-2 Black, 50, 7
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Resize the Smudge to 43%, paste, duplicate, flip and move down a bit,
merge visible, and then apply your mask, delete and merge group.

Resize Swirl 2 to 12%, paste, apply the Mura Meister Filter-Copies-Encircle
at default.

Resize the Crib to 20%, paste more toward the left side.

Resize the String of lights to 18%, paste at the top of your tag.

Resize your tube to 30%, if using the same one I am and place on
the right side.

Resize the safety pin to 2%, free rotate to the right at 90, paste on
the blanket on the crib, take your erase and erase a
small part to make it look like it is pinned on the blanket,
duplicate and move over and down a bit.

Resize the shoe to 5%, duplicate and place them on the left
side by the crib.

Resize the Blocks to 10%, place at the bottom in front of the tube and shoes.

Resize the Bunny to 6%, place on top of the blocks.

Resize the train to 12%, place on the right in front of the tube.

Resize the baby bottle to 4%, place in front of the blocks at the bottom.

Resize the baby outfit to 5%, place on the block.

Resize the Pram to 12%, mirror and place on the left side, below
the shoe layers

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Sunday, April 12, 2015

Magical Moment PTU

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Elias Chatzoudis. 
 
You need a license to use this art work. Please do not use without a license.
 You can find this art at his Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Kit Magical Moment By BLT DeZignZ and you can get it  HERE 
Xero Filter-Radiance
Mura Meister Copies-Encircle
 RR Mask 2_1  HERE
Font of Choice, I used Orbitronio

Drop shadow is usually V-2 H-2 Black, 50, 7
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.

Resize paper 6 to 23%, paste, apply your mask, delete and merge group.

Resize frame 1 to 15%, paste, free rotate to the left at 15 degrees.
Click inside with your magic wand, expand by 5, resize paper 7 to
15%, paste, invert, delete, then paste your close up, delete, select none.

Apply the Xero Filter-Radiance to your close up.

Resize frame 3 to 15%, paste below the paper layer on the upper left,
duplicate, move down to the lower right side.

Paste your tube and place on the right.

Resize the Flower 1 to 15%, place below the tube layer on the left,
duplicate, move to the upper right below the paper layer of the frame,
erase any of the box showing past the tube layer.

Resize Foliage 1 to 15%, paste on the bottom layer, duplicate, mirror.
Duplicate and move to the upper right.

Resize the Swirl to 25%, paste below your tube layer on the bottom right,
duplicate, mirror and flip, move down to just above the mask layer and
adjust to the right a bit.

Resize the Glow to 40%, mirror, paste just above the mask layer.
Resize the original to 25%, mirror and place on your tube layer.

Resize the sparkle trail to 25%, paste on one side, duplicate, mirror.

Resize the ribbon to 20%, paste below all the greenery layers.
Resize the string of lights to 10% and place on the flower box, duplicate
move up to the top of the frame, take your pick tool and rotate it
to the angle of the frame and erase some of the edges.

Resize flower 9 to 10%, flip, erase a bit of the green stem, apply Mura Meister Copies-Encircle,
Move down to just above the larger Glow circles and up to the right,
duplicate and move over to the left and down some.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Thursday, March 19, 2015

CT Tag using PTU Affection

CT Tag using the AWESOME kit "Affection" by
Honored Scraps and you can purchase it at
You can find the tube & scrap available at Digital Chaos.

 The scrap is also available at Treasured Scraps....

Tuesday, March 17, 2015

**Coming Soon - Arthur Crowe** Super Sexy Skull


**Coming Soon - Arthur Crowe**
Check out this AWESOME new tube

SUPER SEXY SKULL by ARTHUR CROWE!!
She will also be available with an
EXCLUSIVE matching kit by Creation by Sanie...
You will find them in the store soon!!!


www.arthurcrowesfactory.com/store/

 
Snags
 
 

Monday, March 16, 2015

Amazon Babe **COMING Soon**

 
 
**COMING Soon**
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
The tube is called Amazon Babe and I am using a matching kit by the same name
by Kizzed by Kelz
You need a license to use this art work. Please do not use without a license.
 You can find this art and kit at his store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Amazon Babe by Kizzed by Kelz  HERE
RR Mask 2_1  HERE
Font of Choice,  I used Mad Beef

Drop Shadow usually V2 H2 50 black
 
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800

Paste paper 7, apply your mask, delete, merge group.

Paste element 29, move up to the left some, duplicate and move
down to the right.

Paste your tube so the face is showing in the upper frame, either erase or use your free hand tool to draw around the frame, invert and delete, change the
blend mode to Luminance(L)

Resize the tube to 55%, if using the same one I am and paste, erasing
some of the tree at the top and some of the edges on each side at the bottom.

Resize element 23 to 80%, place on the right side, paste element 21 behind the tube layer and adjust to your liking.

Paste element 26 just above the mask layer on the right side.

Resize element 27 to 55%, place above the tube layer toward the right,
duplicate, mirror, resize to 75%. Duplicate again, move below the tube
layer on the left and up some.

Paste element 14 under your tube layer, duplicate and move over some.

Resize element 34 to 75%, paste behind the tube layer and place how you like,
duplicate, resize to 75%, move below the fern layer and over to the left more.
Resize element 32 to 65%, place on the right side more below the water layers
and erase any of the stem showing below. Duplicate and resize to 65%, mirror
and adjust on the left.

Resize element 6 to 50%, place on the left below the flowers, duplicate and move up a bit.

Resize element 31 to 20%, mirror and place at the upper right.
Paste the sparkle layer above the frame layers.

Add any other elements you would like.
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.