Wednesday, February 27, 2013

Tag Show Offs

Thought I would show off a couple of AWESOME tags made by others from a couple of my tuts.
They did an awesome job on their tags.
Thank you both for sharing them with me and I am proud to show them off to others.
You both rocked the tuts.
 
To see the animation on the one below, click on the pic
It is awesome...
 
 
 

Saturday, February 23, 2013

Irish Girls Rock FTU



 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Danny Lee.
You need a license to use this art work. Please do not use without a license.
You can find his art at SATC store HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Andrew Filters #44-Fabric Wrapper
Mura Meister-Copies
Xero Filter-Radiance
UnPlugged Tools-Interlace
Font Worstveld for name
Oh la la for pixel workart
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*

Open a new image, 600 x 250 and fill with color of choice, I used #7eac7d.
 
Paste your tube and apply Mura Meister-Copies-Wallpaper rotate at default settings.

Apply Andrews Filter #44-Fabric Wrap at default settings.

Then go to Adjust, Blur, Radial Blur with these settings
Twirl, 50, 10 0, 0, 10, Elliptical checked.
Then apply Andrew Filter #44 again, change the blend mode to overlay.
Now apply Unplugged Tools-Interlace with these settings, twice.
5, 20, 1, 0

Take your selection tool and draw out a small rectangle about half way across, add a new raster layer and fill with #56944c, Effects, Edge effects, enhance, select none.

Type out your wording of choice, I typed out Irish Girls Rock, using Oh la la for the wording, set on 10 Pixels and the Bold button pushed in, merge down, duplicate and move one to the left side top and the other to the right side bottom.

Paste your tube and move below the rectangle layer, duplicate and move to the other side, merge these together, change the blend mode to overlay or one you prefer.
Apply xero filter-Radiance.

Paste your tube again in the center and adjust to your liking.
Duplicate, gaussian blur at 4, change the blend mode to soft light, merge down, then merge visible and add AAA Frames-Foto frame with these settings
4, 0, 0, 3,
0, 0, 0, 50
Add your copyright and name.

For the Avator
Open a new image 150 x 150 or a size of your choice.
Paste your tag and resize to 80% and place how you like it.
Apply the AAA Frames-Foto frames with same settings as before.
Be sure all copyrights have been added to your tag.
Add your name and that is it

Hope you enjoyed doing this tut.

Thursday, February 14, 2013

Irish Girl FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ismael Rac.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE
Supplies Needed
I used PSPX...but any of them should work.
Scrap Lucky by Tasha's Playground HERE
Template by Deb at CMC HERE
Monti Blinds Mask HERE
Xero Filter- Soft Mood, Mistifier and Clarity (Optional)
VM Extravaganza-Transmission
Font St Charles 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open template #4 duplicate and close the original, delete the credits and the 2 clovers.
Image, canvas size, 800 x 800
 
Paste paper #1 or one of your choice,  apply your mask, invert and delete, move to bottom layer.
 
Mirror raster 4 and copy of vector1, merge together and select all, paste paper of choice, I used #6, then invert and delete.
On the white circle, add noise at 50%.
Select the black circle, paste paper #7, invert and delete.
 
On the green square add noise at 50%.
Select the black square, select all, float, defloat, paster paper #11, invert and delete.
Do not deselect yet, now paste your closeup tube, hit the delete key on your keyboard, select none.
On the paper layer apply the VM Extravaganza-Transmission
with these settings
25, 0, 10
Apply the Xero filter-Soft Mood first and then Mistifier with these settings
255, 150 and all others at 255
Resize your tube and paste just below the wordart layers.
 
Resize the mug to 50%, duplicate and place on the right side.
Resize the cupcake to 50% and place between the 2 mugs.
 
Resize the orange shamrock to 40%, duplicate and place on the frame corners.
 
Copy and paste the dice on the left side of the wordart.
Resize the lightray to 40% , duplicate and place on the i letters of the wordart.
 
Paste the swirl element on the left side and move down below the green square frame, duplicate and mirror behind your tube.
Paste the clover spray and move to just above the oval layer and move it around to your liking, duplicate and flip and mirror and erase the parts you do not want showing.
Resize the starpop to 75% and place below the green circles and free rotate to the left 10 degrees.
Resize the lips to 40% and free rotate 15 degrees to the left.
Add any other elements that you would like, then merge visible and resize.
I then added the xero filter-Clarity to the merged tag.
 
Add your copyright and name and you are done.
 
Hope you have enjoyed doing this tut.
 
 
  

Tuesday, February 12, 2013

Crowe St Patty Day Forum Set FTU



 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at the his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap A Little Irish Charm by kittz kreationz HERE
Be sure to check out her blog HERE
Filters Unlimited-Special Effects1-Square Bumps
Animation by Scrappy Bit of Fun Clovers Spinning #59 HERE
Font  Viking
  Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 600 x 250
Fill with color or choice, I used #9fbb83.
Apply Filters Unlimited-Special Effects 1-Square Bumps, with these settings
55 and 25 or play around and get what you like the looks of.
 
Resize the floral border to 75%, place at the bottom, duplicate and flip, add noise at 35%.

Resize the glass of beer to 30% and place at the bottom behind the floral border and adjust.

Resize the wordart to 30% and place where you like it.

Resize the frog to 20% and place toward the bottom, duplicate and move over to the left, adjust once tube is added.

Add your tube, duplicate, guassian blur at 4, change the blend mode to hard light and merge down.

Crop your tag now, being on the top layer select all, new raster layer, fill with a color of choice, contract by 2, delete, new raster layer again, fill with another color of choice, contract by 2, delete and one more new raster layer, fill with your first color, contract by 2, delete. Add noise to your second frame layer, close off the background color layer and merge your layers together.

Add your copyrights and name now.

To animate, take your background layer to animation shop and depending on your animation, make that many layers.
The one I am using takes 31 layers, so make 31 layers of your tag.
Click on the animation, go to edit, select all, copy.
Then go to your tag, edit, select all, paste into selected frame.
I pasted the animation twice one on each side.
Then go back to psp, close off your background and copy merged to animation shop and make the same amount of layers again, and do the same steps as before, being sure to line up the frame on your animated tag.
Test your animation and if happy with it all, save it.
For the Avator
New image 150 x 200
Paste the background from your tag, and take to animation and add the animation like before, but move it more to the left side this time.
Copy merge your tag into the avator and resize to 83% and adjust how you like it, add the frame like before in your other tag.
Add your copyrights and name and close off your background layer, copy merged to animation shop, make the same amount of layers as before and paste onto your background layer. Test your animation and if all is good then save and you are done.

Hope you enjoyed doing this tut.


 

Saturday, February 9, 2013

Memories Stitched with Love FTU



 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Bits N Bobs.
You need a license to use this art work. Please do not use without a license.
You can find her art at the PFD store HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Memorial Garden by Wicked Princess HERE
PhotoEffex-Scanlines
Xero Filter-Clarity
Font  Saginaw 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 600 x 250
Copy and paste paper #1, then using your crop tool, crop this layer.
Go to Adjust, blur, motion blur, angle 45 first,  strenght 100%, then apply again with angle at 315.
Apply the PhotoEffex-Scanlines, width 2, noise at 50%.

Paste a close up tube and move to the right side, change the blend mode to Soft light.

Copy and paste the Glitter dust, free rotate 90% move to one side, duplicate and mirror and merge together.

Resize the flower to 50% and place down in the right corner, adjust how you like it, duplicate, mirror, duplicate, flip, duplicate, mirror, then merge these 4 layers together.
Resize the leaf spray to 50% and move to the bottom and adjust to how much of it you want to show.

Resize the Cluster frame to 40% and copy and paste, move to the left just a bit. Take your free hand tool and draw around the frame, add a new layer and fill with a color of choice, I used #b8ad8d, and add the PhotoEffex-Scanlines at the same settings as before, move this layer below the frame.

Resize the circle frame to 50% and move below the other frame layer and adjust.

Copy and paste your tube, move below the first frame layer, duplicate and move above the frame layer and erase the parts you do not want showing.

Reisze the book to 30% and place on the left bottom side of the frame.
Resize the dove to 20% and place by the book.

Resize your wordart to 40% and being on the top layer paste. Image, free rotate to the right 20 degrees. Apply the Xero Filter-Clarity, drop shadow, sharpen and a light gradient glow.
Take your Selection tool and draw out a small rectangle on one side, new raster layer and fill with #b8ad8d, change the blend mode to screen and lower the opacity to 55%, then Effects, and edge effect,  and move down to just above your first tube layer that is on the right, duplicate and mirror.
Type out your wording, duplicate, flip and move below the rectangle layer. I typed out the word memories twice.

Resize leaf 3 to 40%, place on one side of the frame, move below the frame and duplicate and mirror.
Once happy with it all merge visible and apply the AAA Foto Frame-width set to 5.
Add all your copyrights and name and that's it.

If you would like to make an Avator
Open a new image 150 x 200, copy and paste your tag you just finished, resize to 85% and place how you like it, then merge visible and apply the AAA Foto Frame as before.
Add your copyright and name and all done now.

Hope you enjoyed doing this tut.

Thursday, February 7, 2013

The Beauty of A Rose FTU



 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Ellie_Milk.
You need a license to use this art work. Please do not use without a license.
You can find this art at the PFD store HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap A Valentine Affair by Chica HERE
Scrap links on the right side
PhotoEffex-Scanlines
Xero Filter-  Mistifier
 Animation by Scrappy Bit of Fun Valentine 190 HERE
Font Oh La La for small wording HERE
Font for name Simply Glamorous 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open a new image 600 x 250
Resize paper #2 to 75% and paste, using your crop tool, crop this layer.
 Apply the PhotoEffex-Scanlines, width 2, noise at 50%.

Resize the heart chain #3 to 50% and place on the paper layer, apply mura meister copies, tiling, gap at 3, do not add a drop shadow to this, you want it to be just faintly noticed, merge down with your background layer.

Resize ribbon #4 to 50%, paste, then take your free hand tool and draw around one of the straight pieces, duplicate several times and place on each end to extend the ribbon out to the end of the tag.

Close off the paper background and merge visible, now reopen the paper background.

On the ribbon strip type out your wording, I typed out
The Beauty of A Rose, using Oh La La font set at 10 pixels, then merge down.

Resize glass heart #3 to 50%, paste, take your free hand tool and draw around the 2 hearts, paste your tube, move the face up and then paste your tube again with the rose in the bottom part of the heart, invert and delete each one, erase any part you do not want showing in the heart.
Paste a paper of choice, delete and move below the tube layers, select none.
Merge the face and rose tube layers into one and apply the
Xero Filter-Mistifier, changing the haziness to 250.

Merge the tubes, paper and heart into one layer, free rotate to 15 degrees to the right, then duplicate and mirror.

Copy the original resized heart and move below the heart with the tubes and change the blend mode to overlay or one that you prefer and move down some, then duplicate and mirror, move below that heart and down some also.

Resize the butterfly to 15% and free rotate to the left, 20 degrees and place on the left hearts, duplicate and mirror.
For the frame, select all, new raster layer, fill with a color of choice, contract by 2 delete, add another new raster layer, fill with another color, contract by 2 delete and one more new layer and fill with the first color, contract by 2 delete, select none.
Add noise at 50% on the second frame layer, merge your frame layers with your tube layer.
Crop your tag again and
add your copyrights and name at this time.

Close off your frame and tube layer and copy merged the other layers to animation shop, make 21 layers, same as the animation of hearts.
Click on the animated hearts, edit, select all copy, then on your merged layer, edit, select all, paste into selected frame,
I pasted mine 3 times.
Go back to psp and close off your other layers, reopen your frame and tube layer, copy merged to animation shop, make 21 layers again and edit, select all, copy and go to the animated tag and edit, select all, paste into selected frame.

Test your animation, if happy, save and you are done.
Be sure you have added all copyrights to your tags.

For the Avator
Open a new image 150 x 200
Cope merged your tag you just made without the tube and resize to 85%, adjust how you like it.
Paste your tube and resize to 85% and position to the left a bit, and crop.
Do the frame as you did on your signature tag.
Merge the frame layers and the tube layer together.
Close that off and copy merged the other layer to animation shop and do the same amount of frames as before and add your heart animation.
Then back to psp, close off this layer and open your frame, tube layer, copy merged to animation shop, and do the same as before.
Be sure you have added all your copyrights to your signature tag and Avator.
 

Hope you enjoyed doing this tut.

Saturday, February 2, 2013

Guilty of Shooting Cupid FTU

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of Arthur Crowe.
You need a license to use this art work. Please do not use without a license.
You can find his art at his store HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Made by Justine-Shot Threw the Heart  HERE
Collab  Temps #2 by Scrap Rebellion  HERE
Xero Filter- Porcelain and Radiance
penta.com filter-Color Dot
Melissaz Creationz Mask 6 HERE
 Font Janda Swirly 
Drop Shadow usually V2 H2 50 5
Let's get started

*Remember to add your Drop Shadow as you go along*

Open template, duplicate and close the original, delete the credits and hearts. 
Image, canvas size, 800 x 800
New raster layer, fill with a color of choice, then apply your mask, delete and merge group.

Starting at the bottom layer 1, select all, paste glitter paper #1, invert and delete.
Layer 2, apply the penta.com filter-color dot.

Layer 3 paste paper #4 invert and delete.

Layer 6, select allm add a new layer and fill with a color of choice and add noise at 50%

Layer 7 paste paper #8, invert and delete.

Select the wordart, select all, expand by 2, new raster layer, fill with white, add noise at 50% and move below the wordart.
Take your closeup tube, mirror and paste on layer 7, just below the wordart,
 select all, float, defloat, invert and delete the excess tube.
Change the blend mode to screen, then apply
the Xero filter-Porcelain first and then Radiance.
Paste your tube and resize to 75% if using the same one I used. Place a little to the right and erase the legs below the the template layer.
Paste heart wire #2 and resize to 95% and move to the bottom layer.
Resize the heart lock to 60% and place by the wordart.
Resize the hibicus flower #2 to 35% and place under the heart lock.
Resize the cupcakes to 35% and place on the right side.
Duplicate the hibicus flower and mirror and place between the 2 cupcakes.
Resize the candy heart to 40% and place by the cupcakes.
Resize the lil devil to 30% and place behind the cupcakes and up a bit.
Resize the candy to 35% and place at the upper left.
Resize candy 1 to 35% and place by the heart lock.
Resize any other candy pieces that you like and place on the tag how you like the looks of them.

Paste curl ribbon #2, free rotate to the left at 90 degrees and move to just above your tube layer.
Resize the heart lollipop to 30% and place on the left side.
Duplicate and mirror and rotate to the right about 5 degrees or so.

Add any other elements that you would like.
Once happy with it all, close off any background you used and merge visible.

Resize your tag and add all copyrights and your name and you are done.

Hope you enjoyed doing this tut.